Search

Search Results

1. The Influence of Thermodynamic Parameters on Internal Combustion Engines and the Graphical Presentation of Cycles Diagrams Using Matlab

   In this paper, a software package written in Matlab that allows setting up the engine thermodynamic parameters of internal combustion engine cycles...

   Ardit Gjeta, Majlinda Alcani, Altin Dorri in Proceedings of the Joint International Conference: 10th Textile Conference and 4th Conference on Engineering and Entrepreneurship

   Conference paper 2024
   

2. Low temperature glycine nitrate combustion synthesis of nanostructured zinc ferrites for enhanced visible light-driven methylene blue degradation

   In this study, we present the efficient degradation of methylene blue (MB) under visible light using nanostructured zinc ferrite (ZnFe ₂ O ₄ )...

   K. V. Kadam, S. S. Phalake, ... V. M. Khot in Emergent Materials

   Article 18 March 2024
   

3. Sol gel auto-combustion synthesis of bismuth vanadate (BiVO₄) nanoparticles and its supercapacitor applications

   The Bismuth vanadate (BiVO ₄ ) nanoparticles were synthesized using the simple sol–gel auto-combustion method. The synthesized BiVO ₄ NPs showed...

   Onkar M. Pardeshi, Anil B. Gite, ... Arun V. Patil in Journal of Materials Science: Materials in Electronics

   Article 15 September 2023
   

4. BiVO₄ synthesized by the combustion method: a comparison between orange peel powder and urea used as fuel

   In this study, BiVO ₄ particles were synthesized via the combustion method using orange peel powder as a fuel for photocatalytic methylene blue (MB)...

   Odín Reyes-Vallejo, Rocío Sánchez-Albores, ... S. Velumani in Journal of Materials Science: Materials in Electronics

   Article 25 June 2024
   

5. Influence of in-situ phases on the magnetocapacitance response of ex-situ combustion derived BaTiO₃–ferrite composite

   In-situ phases can influence the magnetocapacitance response of a magnetodielectric composite. In this work, BaTiO ₃ -ferrite composite was prepared...

   Sreenivasulu Pachari, Swadesh K. Pratihar, Bibhuti B. Nayak in Journal of Materials Research

   Article 30 November 2023
   

6. Volume Combustion Synthesis in Fe–Ti–C and Fe–Ti Systems

   Abstract

   In situ formation of TiC particles in Fe matrix from Fe + Ti + C (FTC) powder mixtures via volume combustion synthesis (VCS) was...

   Melih Kocyigit, H. Erdem Camurlu in Metallurgical and Materials Transactions A

   Article 18 November 2022
   

7. Influence of fuel combustion on the corrosion behavior of pipeline steels in fire flooding technology

   To study the oxidation behavior of a commonly used pipeline materials of 37Mn5 steel in the process of fire flooding technology, a simulation device...

   Bo Meng, **long Wang, ... Fuhui Wang in npj Materials Degradation

   Article Open access 22 March 2022
   

8. Thermoelectric Properties of Cu₂Se Compound Fabricated at Low-Temperature Combustion Synthesis as a New Approach with Alternative Techniques

   This article report the combustion synthesis of a Cu ₂ Se thermoelectric intermetallic compound via spark plasma sintering (SPS). The elemental copper...

   N. Thangavel, S. Kumaran in Journal of Electronic Materials

   Article 09 January 2023
   

9. Effects of excess Si and Al on synthesis of Ti₃SiC₂ by self-sustaining combustion in the Ti-Si–C-Al system

   Fabrication of Ti ₃ SiC ₂ from elemental powder compacts was conducted by combustion synthesis in the mode of self-propagating high-temperature...

   C. L. Yeh, K. L. Lai in Journal of the Australian Ceramic Society

   Article 24 August 2023
   

10. Combustion Synthesis and Magnetic Properties of Ni–Al–Mn Based Alloy

    Abstract

    The influence of Mn addition on combustion synthesis, morphology, phase composition, and magnetic properties of the Ni–Al–Mn alloys was...

    A. E. Sytschev, N. A. Kochetov, ... M. L. Busurina in International Journal of Self-Propagating High-Temperature Synthesis

    Article 25 June 2022
    

11. Combustion-Alumino-Magnesiothermic Reduction of TiO₂ to Produce a Ti-Rich Ingot

    Titanium metal preparation from titanium dioxide (TiO ₂ ) has been the subject of numerous studies to overcome the chlorination processes at the heart...

    Jong Hyeon Lee, Hayk Nersisyan, ... Woo-Seok Choi in Metallurgical and Materials Transactions B

    Article 03 August 2022
    

12. The Influence of Cu on Combustion Synthesis Mechanism of Ti–Al Intermetallic Compounds Produced From Ti and Al Elemental Powders

    The influence of slight content of Cu as an additive on the reaction mechanism and microstructure of Ti–Al intermetallic compounds, during sintering...

    Mohammad Jafarzadeh, Mansour Soltanieh, Razieh Khoshhal in Metallurgical and Materials Transactions A

    Article 26 June 2023
    

13. Combustion Characteristics of DA465QE Engine Fueled with HHO Enriched Biogas

    This paper presents the results of a numerical simulation of the performance of the DA465QE engine and the impact of adding HHO to biogas on its...

    Anh Vu Vo, Thi Minh Tu Bui, ... Thong Ngo Tan in Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022)

    Conference paper 2023
    

14. Numerical Study of the Kinetics of Dephosphorization with Single-Flow Post-combustion Oxygen Lance in Converter Steelmaking Process

    A gas-metal two-phase flow model was established for the 250 t converter blowing process, and a coupled mass transfer model based on the standard k-ε...

    Chao Liu, Shu-guo Zheng, Miao-yong Zhu in Metallurgical and Materials Transactions B

    Article 21 February 2024
    

15. Formation of silicide/spinel ceramic composites via Al- and Mg-based thermitic combustion synthesis

    Formation of MoSi ₂ –spinel (MgAl ₂ O ₄ ) composites with a wide composition range of MoSi ₂ /MgAl ₂ O ₄ = 1.0–5.0 was studied by thermitic combustion synthesis...

    Chun-Liang Yeh, M. C. Chen, T. H. Shieh in Journal of the Australian Ceramic Society

    Article 12 April 2022
    

16. Synthesis of high-performance single-crystal Li-rich cathode by self-combustion method

    Li-rich manganese-based oxide has been identified as the most promising cathode material for next-generation Li-ion batteries, due to its high...

    Lun-Te Li, Ya-Fen Chen, ... Qun-Hui Yuan in Rare Metals

    Article 28 November 2022
    

17. Combustion of Ni–Al Twisted-Pair Wires in Oxygen

    Abstract

    The combustion dynamics of Ni–Al twisted wires under (1.0–3.0) × 10 ⁵ Ра of oxygen was studied by using rapid video filming and time-resolved...

    V. G. Salamatov, A. I. Kirdyashkin in International Journal of Self-Propagating High-Temperature Synthesis

    Article 01 October 2021
    

18. Novel confinement combustion method of nanosized WC/C for efficient electrocatalytic oxygen reduction

    Nanosized tungsten carbide (WC)/carbon (C) catalyst was synthesized via a novel ultra-rapid confinement combustion synthesis method. The amount of...

    Pengqi Chen, Yunxiao Tai, ... Jigui Cheng in International Journal of Minerals, Metallurgy and Materials

    Article 13 July 2022

19. Reduction of Palladium Compounds in the Wave of Nitrocellulose Flameless Combustion in Ballasted Systems

    Abstract

    The flameless combustion of nitrocellulose in ballasted mixtures consisting of hexamethylene diisocyanurate trimer as an organic binder and...

    Yu. M. Mikhailov, V. V. Aleshin, ... L. V. Zhemchugova in International Journal of Self-Propagating High-Temperature Synthesis

    Article 25 June 2022
    

20. Cathodoluminescence and Photoluminescence Studies of Undoped and Eu²⁺ Doped SrAl₂O₄ Phosphors Prepared by Combustion Method

    Abstract

    Undoped and Eu ²⁺ doped strontium aluminate (SrAl ₂ O ₄ ) nanosized phosphorescent powders were prepared by urea-nitrate solution combustion...

    M. Nazarov, D. Spassky in Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques

    Article 18 October 2023