Search
Search Results
-
Tribological Performance and Tribofilm Evolution of TiAl Matrix Composites with Silver and Titanium Diboride at Elevated Temperatures
In order to understand the anti-friction and anti-wear mechanisms of silver (Ag) and titanium diboride (TiB 2 ) at elevated temperatures, the...
-
Size Effect on Tensile Properties of Cold-Rolled ASS-304 Sheets at Various Service Temperatures
To investigate the relationship between service temperature ranging from –40~250℃, and size effect on tensile properties of thin ASS-304 sheets with...
-
The Effects of Impurity Content on Plastic Deformation and Microstructure Evolution in Niobium at Temperatures from 1473 K to 1773 K
A mechanism is established by which interstitial impurity content increases the high-temperature strength of niobium. A Type 2 niobium sheet material...
-
Hot Corrosion Behavior of Fe–Cr–Ni-Based Austenitic Heat-Resistant Steel Weld Metal in Na2SO4–NaCl Molten Salts at Different Temperatures
The hot corrosion behavior of the austenitic heat-resistant steel weld metal produced by multi-pass gas tungsten arc welding was investigated. A...
-
Deformation Behavior and Cavitation of AA2017 at Elevated Temperatures
In this work, deformation behavior of AA2017-T4 at elevated temperatures was studied employing uni-axial tensile and creep experiments. Tensile tests...
-
First Matrix Cracking Behavior in Ceramic-Matrix Composites at Elevated Temperature
In this chapter, the first matrix cracking stress (FMCS) of fiber-reinforced ceramic-matrix composites (CMCs) is investigated using the energy...
-
About Shear Properties of Plain Weave Fabric CFRP at High Temperatures: Analytical and Experimental Approaches
The in-plane and interlaminar characteristics of plain weave fabric Carbon Fibre Reinforced Polymer (CFRP) composites are studied. The influence of...
-
Tribological Behavior of Carbon Nanotubes Reinforced Acrylonitrile Butadiene Styrene Composites at Elevated Temperature
Acrylonitrile Butadiene Styrene (ABS) being one of commonly available engineering thermoplastic, possesses good dam** property and excellent...
-
Very-High-Cycle-Fatigue Property of IN 718 Manufactured by Selective Laser Melting at Elevated Temperature: Microstructure-Related Failure Behavior and Life Prediction
The high- and very-high-cycle-fatigue properties of IN718 Ni-based superalloy manufactured by selective laser melting (SLM) were investigated by...
-
Influence of PBS, PBAT and TPS content on tensile and processing properties of PLA-based polymeric blends at different temperatures
PLA-based blends were prepared with different ratios of PBS, PBAT and TPS additives to adjust their mechanical and processing properties in various...
-
Microstructural Evolution and Mechanical Properties of AZ31 Magnesium Alloy Processed through Constrained Groove Pressing at Different Deformations and Temperatures
In this study, severe plastic deformation through the constrained groove pressing (CGP) method followed by an annealing operation was applied to the...
-
Mechanical Characteristics of 26H2MF and St12T Steels under Compression at Elevated Temperatures
A system for recording the contraction of cylindrical specimens under static compression loading was developed based on the original cantilever-type...
-
Investigation of Creep Properties and Fracture Mechanism of 430 Ferritic Stainless Steel at Elevated Temperature
During the continuous casting of 430 ferritic stainless steel, the broadening phenomenon and bulging deformation are considered a high-temperature...
-
Development of an Mg–RE-Based Die-Cast Magnesium Alloy for Elevated Applications
The development of magnesium (Mg) alloysMagnesium alloy capable of operating at demanding working temperatures above 200 °C and the ability of using...
-
Effect of Tempering Temperature on the Structure and Mechanical Properties of Medium-Carbon Steel with Elevated Silicon Content
The effect of quenching and tempering on the microstructure, phase composition and mechanical properties of steel 0.33C – 1.8Si – 1.44Mn – 0.58Cr is...
-
Atomistic Simulation of the Effect of H-Phase Precipitate on the Transformation Temperatures and Stress-Induced Phase Transformation in Ni-Rich NiTiHf
Precipitation hardening is considered the most feasible method for strengthening NiTiHf alloys. In order to design the optimum aging treatment to...
-
Microstructure Characteristics and Elevated Temperature Mechanical Properties of a B Contained β-solidified γ-TiAl Alloy
The improved microstructure and enhanced elevated temperature mechanical properties of Ti-44Al-5Nb-(Mo, V, B) alloys were obtained by vacuum arc...
-
Long-term impact of light- and elevated temperature-induced degradation on photovoltaic arrays
AbstractLow levelized cost of electricity (LCOE) has been identified as critical for widespread adoption of photovoltaics (PV) without subsidies....
-
Characterization of Hot-Extruded Mg–Gd–Y–Zn–Zr Alloy Containing a Novel Lamellar Structure and Related High Elevated-Temperature Mechanical Properties
Hot extrusion was introduced to the Mg–10Gd–3Y–1.5Zn–0.5Zr alloy and microstructure evolution, texture configuration and elevated-temperature...
-
Thermal Expansion and Shrinkage of Unidirectional Composites at Elevated Temperatures
The model of multiphase media analyzes the effectiveness of describing thermal expansion and shrinkage of unidirectional polymer composites at their...
