Abstract
In this study, severe plastic deformation through the constrained groove pressing (CGP) method followed by an annealing operation was applied to the AZ31 Mg alloy sheets to improve their microstructural and mechanical properties. Accordingly, the sample is repeatedly deformed at high temperatures through a scheduled pressing succession to accelerate grain refinement. Investigating the deformation and temperature successions in the CGP process indicated their significant dependence on the microstructure characterization and mechanical properties. Also, processing temperature reduction restricted static recovery, recrystallization, and grain growth, leading to the development of fine- and ultrafine-grained structures. Hence, the appropriate selection of deformation and temperature successions can thoroughly affect the total strain, texture evolution, and grain refinement. Therefore, such a thermomechanical treatment can be extended to a broad range of materials.
Similar content being viewed by others
References
B. **e, H. Li, Y. Ning, and M. Fu, Discontinuous Dynamic Recrystallization and Nucleation Mechanisms Associated with 2-, 3- and 4-Grain Junctions of Polycrystalline Nickel-Based Superalloys, Mater. Des., 2023, 231, p 112041. https://doi.org/10.1016/j.matdes.2023.112041
L. Chen, Y. Zhao, M. Li, L. Li, L. Hou, and H. Hou, Reinforced AZ91D Magnesium Alloy with Thixomolding Process Facilitated Dispersion of Graphene Nanoplatelets and Enhanced Interfacial Interactions, Mater. Sci. Eng. A, 2021, 804, p 140793. https://doi.org/10.1016/j.msea.2021.140793
W. Liu, Y. Zhao, Y. Zhang, C. Shuai, L. Chen, Z. Huang, and H. Hou, Deformation-Induced Dynamic Precipitation of 14H-LPSO Structure and Its Effect on Dynamic Recrystallization in Hot-Extruded Mg-Y-Zn Alloys, Int. J. Plast., 2023, 164, p 103573. https://doi.org/10.1016/j.ijplas.2023.103573
M. Li, Q. Guo, L. Chen, L. Li, H. Hou, and Y. Zhao, Microstructure and Properties of Graphene Nanoplatelets Reinforced AZ91D Matrix Composites Prepared by Electromagnetic Stirring Casting, J. Mater. Res. Technol., 2022, 21, p 4138–4150. https://doi.org/10.1016/j.jmrt.2022.11.033
L. Chen, Y. Zhao, J. **g, and H. Hou, Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites fabricated Through Thixomolding Process, J. Alloys Compd., 2023, 940, p 168824. https://doi.org/10.1016/j.jallcom.2023.168824
Y.V.R.K. Prasad, and K.P. Rao, Processing Maps for Hot Deformation of Rolled AZ31 Magnesium Alloy Plate: Anisotropy of Hot Workability, Mater. Sci. Eng. A, 2008, 487, p 316–327. https://doi.org/10.1016/j.msea.2007.10.038
J. Hirsch and T. Al-Samman, Superior Light Metals by Texture Engineering: Optimized Aluminum and Magnesium Alloys for Automotive Applications, Acta Mater., 2013, 61, p 818–843. https://doi.org/10.1016/j.actamat.2012.10.044
G. Martin, C.W. Sinclair, and J.-H. Schmitt, Plastic Strain Heterogeneities in an Mg–1Zn–0.5Nd Alloy, Scr. Mater., 2013, 68, p 695–698. https://doi.org/10.1016/j.scriptamat.2013.01.017
T. Dessolier, P. Lhuissier, F. Roussel-Dherbey, F. Charlot, C. Josserond, J.-J. Blandin, and G. Martin, Effect of Temperature on Deformation Mechanisms of AZ31 Mg-Alloy under Tensile Loading, Mater. Sci. Eng. A, 2020, 775, p 138957. https://doi.org/10.1016/j.msea.2020.138957
C.C. Aydıner and M.A. Telemez, Multiscale Deformation Heterogeneity in Twinning Magnesium Investigated with In Situ Image Correlation, Int. J. Plast., 2014, 56, p 203–218. https://doi.org/10.1016/j.ijplas.2013.12.001
D. Liao, S.-P. Zhu, B. Keshtegar, G. Qian, and Q. Wang, Probabilistic Framework for Fatigue Life Assessment of Notched Components Under Size Effects, Int. J. Mech. Sci., 2020, 181, p 105685. https://doi.org/10.1016/j.ijmecsci.2020.105685
X. Niu, S.-P. Zhu, J.-C. He, D. Liao, J.A.F.O. Correia, F. Berto, and Q. Wang, Defect Tolerant Fatigue Assessment of AM Materials: Size Effect and Probabilistic Prospects, Int. J. Fatigue, 2022, 160, p 106884. https://doi.org/10.1016/j.ijfatigue.2022.106884
X.-K. Li, S.-P. Zhu, D. Liao, J.A.F.O. Correia, F. Berto, and Q. Wang, Probabilistic Fatigue Modelling of Metallic Materials Under Notch and Size Effect using the Weakest Link Theory, Int. J. Fatigue, 2022, 159, p 106788. https://doi.org/10.1016/j.ijfatigue.2022.106788
P. Zhao, J. Zhu, K. Yang, M. Li, G. Shao, H. Lu, Z. Ma, H. Wang, and J. He, Outstanding Wear Resistance of Plasma Sprayed High-Entropy monoboride Composite Coating by Inducing Phase Structural Cooperative Mechanism, Appl. Surf. Sci., 2023, 616, p 156516. https://doi.org/10.1016/j.apsusc.2023.156516
W.P. Jia, X.D. Hu, H.Y. Zhao, D.Y. Ju, and D.L. Chen, Texture Evolution of AZ31 Magnesium Alloy Sheets During Warm Rolling, J. Alloys Compd., 2015, 645, p 70–77. https://doi.org/10.1016/j.jallcom.2015.04.121
B. Wang, L. Deng, C. Adrien, N. Guo, Z. Xu, and Q. Li, Relationship Between Textures and Deformation Modes in Mg–3Al–1Zn Alloy During Uniaxial Tension, Mater Charact, 2015, 108, p 42–50. https://doi.org/10.1016/j.matchar.2015.08.014
T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas, Dynamic and Post-dynamic Recrystallization Under Hot, Cold and Severe Plastic Deformation Conditions, Prog. Mater. Sci., 2014, 60, p 130–207. https://doi.org/10.1016/j.pmatsci.2013.09.002
M. Ebrahimi, Q. Wang, and S. Attarilar, A Comprehensive Review of Magnesium-Based Alloys and Composites Processed by Cyclic Extrusion Compression and the Related Techniques, Prog. Mater. Sci., 2023, 131, p 101016. https://doi.org/10.1016/j.pmatsci.2022.101016
M. Ebrahimi and M.A. Par, Twenty-Year Uninterrupted Endeavor of Friction Stir Processing by Focusing on Copper and Its Alloys, J. Alloys Compd., 2019, 781, p 1074–1090. https://doi.org/10.1016/j.jallcom.2018.12.083
F. Djavanroodi, M. Ebrahimi, B. Rajabifar, and S. Akramizadeh, Fatigue Design Factors for ECAPed Materials, Mater. Sci. Eng. A, 2010 https://doi.org/10.1016/j.msea.2010.09.080
P. Fernandez-Zelaia and S.N. Melkote, Process–Structure–Property Relationships in Bimodal Machined Microstructures Using Robust Structure Descriptors, J. Mater. Process. Technol., 2019, 273, p 116251. https://doi.org/10.1016/j.jmatprotec.2019.116251
M. Ebrahimi and C. Gode, Severely Deformed Copper by Equal Channel Angular Pressing, Prog. Nat. Sci. Mater. Int., 2017, 27, p 244–250. https://doi.org/10.1016/j.pnsc.2017.03.002
R. Valiev, Nanostructuring of Metallic Materials by SPD Processing for Advanced Properties, Nat. Mater., 2004, 3, p 511–516. https://doi.org/10.3139/146.110095
R.Z. Valiev and T.G. Langdon, Principles of Equal-Channel Angular Pressing as a Processing Tool for Grain Refinement, Prog. Mater. Sci., 2006, 51, p 881–981. https://doi.org/10.1016/j.pmatsci.2006.02.003
W. Guo, Q. Wang, B. Ye, X. Li, X. Liu, and H. Zhou, Microstructural Refinement and Homogenization of Mg-SiC Nanocomposites by Cyclic Extrusion Compression, Mater. Sci. Eng. A, 2012, 556, p 267–270. https://doi.org/10.1016/j.msea.2012.06.086
P. Luo, D.T. Mcdonald, W. Xu, S. Palanisamy, M.S. Dargusch, and K. **a, A Modified Hall–Petch Relationship in Ultrafine-Grained Titanium Recycled from Chips by Equal Channel Angular Pressing, Scr. Mater., 2012, 66, p 785–788. https://doi.org/10.1016/j.scriptamat.2012.02.008
C. Yuhua, M. Yuqing, L. Weiwei, and H. Peng, Investigation of Welding Crack in Micro Laser Welded NiTiNb Shape Memory Alloy and Ti6Al4V Alloy Dissimilar Metals Joints, Opt. Laser Technol., 2017, 91, p 197–202. https://doi.org/10.1016/j.optlastec.2016.12.028
J. **e, Y. Chen, L. Yin, T. Zhang, S. Wang, and L. Wang, Microstructure and Mechanical Properties of Ultrasonic Spot Welding TiNi/Ti6Al4V Dissimilar Materials Using Pure Al Coating, J. Manuf. Process., 2021, 64, p 473–480. https://doi.org/10.1016/j.jmapro.2021.02.009
M.H. Shaeri, M. Shaeri, M. Ebrahimi, M.T. Salehi, and S.H. Seyyedein, Effect of ECAP Temperature on Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy, Prog. Nat. Sci. Mater. Int., 2016 https://doi.org/10.1016/j.pnsc.2016.03.003
M. Ebrahimi, S.A.N. Tiji, and F. Djavanroodi, Upper Bound Solution of Equal Channel Forward Extrusion Process as a New Severe Plastic Deformation Method, Metall. Res. Technol., 2015 https://doi.org/10.1051/metal/2015044
M.M. Abramova, N.A. Enikeev, R.Z. Valiev, A. Etienne, B. Radiguet, Y. Ivanisenko, and X. Sauvage, Grain Boundary Segregation Induced Strengthening of an Ultrafine-Grained Austenitic Stainless Steel, Mater. Lett., 2014, 136, p 349–352. https://doi.org/10.1016/j.matlet.2014.07.188
F. Djavanroodi, M. Ebrahimi, and J.F. Nayfeh, Tribological and Mechanical Investigation of Multi-directional Forged Nickel, Sci. Rep., 2019 https://doi.org/10.1038/s41598-018-36584-w
M. Ebrahimi and Q. Wang, Accumulative Roll-Bonding of Aluminum Alloys and Composites: An Overview of Properties and Performance, J. Mater. Res. Technol., 2022, 19, p 4381–4403. https://doi.org/10.1016/j.jmrt.2022.06.175
R.J. Fan, S. Attarilar, M. Shamsborhan, M. Ebrahimi, C. Göde, and H.V. Özkavak, Enhancing Mechanical Properties and Corrosion Performance of AA6063 Aluminum Alloys Through Constrained Groove Pressing technique, Trans. Nonferrous Met. Soc. China, 2020, 30, p 1790–1802. https://doi.org/10.1016/S1003-6326(20)65339-0
M. Ebrahimi, Fatigue Behaviors of Materials Processed by Planar Twist Extrusion, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2017 https://doi.org/10.1007/s11661-017-4375-4
D.H. Shin, J.-J. Park, Y.-S. Kim, and K.-T. Park, Constrained Groove Pressing and Its Application to Grain Refinement of Aluminum, Mater. Sci. Eng. A, 2002, 328, p 98–103. https://doi.org/10.1016/S0921-5093(01)01665-3
M. Ebrahimi, S. Attarilar, F. Djavanroodi, C. Gode, and H.S. Kim, Wear Properties of Brass Samples Subjected to Constrained Groove Pressing Process, Mater. Des., 2014, 63, p 531–537. https://doi.org/10.1016/j.matdes.2014.06.043
A. Sajadi, M. Ebrahimi, and F. Djavanroodi, Experimental and Numerical Investigation of Al Properties Fabricated by CGP Process, Mater. Sci. Eng. A, 2012 https://doi.org/10.1016/j.msea.2012.04.121
A.K. Gupta, T.S. Maddukuri, and S.K. Singh, Constrained Groove Pressing for Sheet Metal Processing, Prog. Mater. Sci., 2016, 84, p 403–462. https://doi.org/10.1016/j.pmatsci.2016.09.008
J.X. Fang, S.Y. Dong, S.B. Li, Y.J. Wang, B.S. Xu, J. Li, B. Liu, and Y.L. Jiang, Direct Laser Deposition as Repair Technology for a Low Transformation Temperature Alloy: Microstructure, Residual Stress, and Properties, Mater. Sci. Eng. A, 2019, 748, p 119–127. https://doi.org/10.1016/j.msea.2019.01.072
J.X. Fang, J.X. Wang, Y.J. Wang, H.T. He, D.B. Zhang, and Y. Cao, Microstructure Evolution and Deformation Behavior During Stretching of a Compositionally Inhomogeneous TWIP-TRIP Cantor-Like Alloy by Laser Powder deposition, Mater. Sci. Eng. A, 2022, 847, p 143319. https://doi.org/10.1016/j.msea.2022.143319
F. Fereshteh-Saniee, S. Ghorbanhosseini, and A. Sonboli, Inclusive Anisotropy and Texture Analyses of AZ91 Mg Sheets Subjected to Various Passes of Elevated-Temperature Constrained Groove pressing, Proc. Inst. Mech Eng. Part L J. Mater. Des. Appl., 2023, 237, p 1638–1650. https://doi.org/10.1177/14644207231152141
G. Wang and L. Zhu, The Fracture Behavior and Thermal Stability of Commercially Pure Nickel Sheets Processed by Constrained Groove Pressing, Metals (Basel), 2019, 9, p 1047. https://doi.org/10.3390/met9101047
M. Akhil Sharma, C. Shravan Kumar, M. Nithin Kunal Reddy, and B. Tanya, Study on Mechanical Properties of AZ31-Mg Alloy and Effect of Deformation Using Constrained Groove pressing–A Review Paper, Mater. Today Proc., 2022, 62, p 4463–4468. https://doi.org/10.1016/j.matpr.2022.04.935
S. Sama, S. Babbepalli, A. Budime, and T. Buddi, The Study of Mechanical and Microstructural Properties of the AZ31 Magnesium Alloy Using Constrained Groove Pressing at Elevated Temperature: A Review, Mater. Today Proc., 2022, 62, p 3429–3434. https://doi.org/10.1016/j.matpr.2022.04.275
S. Kumar, Develo** Methods of Constrained Groove Pressing Technique: A Review, Proc. Inst. Mech Eng. Part L J. Mater. Des. Appl., 2023, 237, p 1319–1346. https://doi.org/10.1177/14644207221143358
Z. Wang, Y. Guan, T. Wang, Q. Zhang, X. Wei, X. Fang, G. Zhu, and S. Gao, Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Sheets Processed by Constrained Groove Pressing, Mater. Sci. Eng. A, 2019, 745, p 450–459. https://doi.org/10.1016/j.msea.2019.01.006
Q. Yang and A.K. Ghosh, Production of Ultrafine-Grain Microstructure in Mg Alloy by Alternate Biaxial Reverse Corrugation, Acta Mater., 2006, 54, p 5147–5158. https://doi.org/10.1016/j.actamat.2006.06.045
Q. Huo, X. Yang, H. Sun, B. Li, J. Qin, J. Wang, and J. Ma, Enhancement of Tensile Ductility and Stretch Formability of AZ31 Magnesium Alloy Sheet Processed by Cross-Wavy Bending, J. Alloys Compd., 2013, 581, p 230–235. https://doi.org/10.1016/j.jallcom.2013.06.185
X. Yang, Z. Sun, J. **ng, H. Miura, and T. Sakai, Grain Size and Texture Changes of Magnesium Alloy AZ31 During Multi-directional Forging, Trans. Nonferrous Met. Soc. China, 2008, 18, p s200–s204. https://doi.org/10.1016/S1003-6326(10)60202-6
M. Janeček, M. Popov, M.G. Krieger, R.J. Hellmig, and Y. Estrin, Mechanical Properties and Microstructure of a Mg Alloy AZ31 Prepared by Equal-Channel Angular Pressing, Mater. Sci. Eng. A, 2007, 462, p 116–120. https://doi.org/10.1016/j.msea.2006.01.174
S.M. Masoudpanah and R. Mahmudi, Effects of Rare-Earth Elements and Ca Additions on the Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Processed by ECAP, Mater. Sci. Eng. A, 2009, 526, p 22–30. https://doi.org/10.1016/j.msea.2009.08.027
M. Zimina, J. Bohlen, D. Letzig, G. Kurz, M. Cieslar, and J. Zník, The Study of Microstructure and Mechanical Properties of Twin-Roll Cast AZ31 Magnesium Alloy After Constrained Groove Pressing, IOP Conf. Ser. Mater. Sci. Eng., 2014, 63, p 012078. https://doi.org/10.1088/1757-899X/63/1/012078
Z. Wang, K. Wang, X. Wang, T. Wang, L. Zhu, and Y. Guan, Warm Tensile Deformation and Fracture Behavior of AZ31 Magnesium Alloy Sheets Processed by Constrained Groove Pressing, J. Mater. Eng. Perform., 2020, 29, p 7662–7677. https://doi.org/10.1007/s11665-020-05220-y
P.T. Thuy, D.T.H. Hue, D.M. Ngung, and P. Quang, A Study on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy after Constrained Groove Pressing, IOP Conf. Ser. Mater. Sci. Eng., 2019, 611, p 012005. https://doi.org/10.1088/1757-899X/611/1/012005
P. Lin, T. Tang, Z. Zhao, W. Wang, and C. Chi, Refinement Strengthening of AZ31 Magnesium Alloy by Warm Constrained Groove Pressing, Mater. Sci., 2017 https://doi.org/10.5755/j01.ms.23.1.14392
K. Soon Fong, M. Jen Tan, F. Lan Ng, A. Danno, and B. Wah Chua, Microstructure Stability of a Fine-Grained AZ31 Magnesium Alloy Processed by Constrained Groove Pressing During Isothermal Annealing, J. Manuf. Sci. Eng., 2017 https://doi.org/10.1115/1.4036529
Q. Wang, Y. Mu, J. Lin, L. Zhang, and H.J. Roven, Strengthening and Toughening Mechanisms of an Ultrafine Grained Mg-Gd-Y-Zr Alloy Processed by Cyclic Extrusion and Compression, Mater. Sci. Eng. A, 2017, 699, p 26–30. https://doi.org/10.1016/j.msea.2017.05.080
B. Sułkowski, M. Janoska, G. Boczkal, R. Chulist, M. Mroczkowski, and P. Pałka, The Effect of Severe Plastic Deformation on the Mg Properties After CEC Deformation, J. Magnes. Alloy., 2020, 8, p 761–768. https://doi.org/10.1016/j.jma.2020.04.005
P. Mansoor and S.M. Dasharath, Microstructural and Mechanical Properties of Magnesium Alloy Processed by Severe Plastic Deformation (SPD)-A Review, Mater. Today Proc., 2020, 20, p 145–154. https://doi.org/10.1016/j.matpr.2019.10.088
I.J. Beyerlein and L.S. Tóth, Texture Evolution in Equal-Channel Angular Extrusion, Prog. Mater. Sci., 2009, 54, p 427–510. https://doi.org/10.1016/j.pmatsci.2009.01.001
S. Yi, J. Bohlen, F. Heinemann, and D. Letzig, Mechanical Anisotropy and Deep Drawing Behaviour of AZ31 and ZE10 Magnesium Alloy Sheets, Acta Mater., 2010, 58, p 592–605. https://doi.org/10.1016/j.actamat.2009.09.038
A. Rollett, F. Humphreys, G.S. Rohrer, and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed. Elsevier, 2004. https://doi.org/10.1016/B978-0-08-044164-1.X5000-2
T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas, Progress in Materials Science Dynamic and Post-Dynamic Recrystallization Under Hot, Cold and Severe Plastic Deformation Conditions, J. Prog. Mater. Sci., 2014, 60, p 130–207. https://doi.org/10.1016/j.pmatsci.2013.09.002
M.R. Barnett, A Taylor Model Based Description of the Proof Stress of Magnesium AZ31 During Hot Working, Metall. Mater. Trans. A, 2003, 34, p 1799–1806. https://doi.org/10.1007/s11661-003-0146-5
Q. Ma, B. Li, E.B. Marin, and S.J. Horstemeyer, Twinning-Induced Dynamic Recrystallization in a Magnesium Alloy Extruded at 450°C, Scr. Mater., 2011, 65, p 823–826. https://doi.org/10.1016/j.scriptamat.2011.07.046
É. Martin and J.J. Jonas, Evolution of Microstructure and Microtexture During the Hot Deformation of Mg–3% Al, Acta Mater., 2010, 58, p 4253–4266. https://doi.org/10.1016/j.actamat.2010.04.017
L. Jiang, J.J. Jonas, R.K. Mishra, A.A. Luo, A.K. Sachdev, and S. Godet, Twinning and Texture Development in Two Mg Alloys Subjected to Loading Along Three Different Strain Paths, Acta Mater., 2007, 55, p 3899–3910. https://doi.org/10.1016/j.actamat.2007.03.006
N.V. Dudamell, I. Ulacia, F. Gálvez, S. Yi, J. Bohlen, D. Letzig, I. Hurtado, and M.T. Pérez-Prado, Influence of Texture on the Recrystallization Mechanisms in an AZ31 Mg Sheet Alloy at Dynamic rates, Mater. Sci. Eng. A, 2011 https://doi.org/10.1016/j.msea.2011.11.018
A.S. Khan, A. Pandey, T. Gnäupel-Herold, and R.K. Mishra, Mechanical Response and Texture Evolution of AZ31 Alloy at Large Strains for Different Strain Rates and Temperatures, Int. J. Plast., 2011, 27, p 688–706. https://doi.org/10.1016/j.ijplas.2010.08.009
J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, and K. Higashi, The Activity of Non-basal Slip Systems and Dynamic Recovery at Room Temperature in Fine-Grained AZ31B Magnesium Alloys, Acta Mater., 2003, 51, p 2055–2065. https://doi.org/10.1016/S1359-6454(03)00005-3
M.R. Barnett, M.D. Nave, and A. Ghaderi, Yield Point Elongation due to Twinning in a Magnesium Alloy, Acta Mater., 2012, 60, p 1433–1443. https://doi.org/10.1016/j.actamat.2011.11.022
W.F. Hosford and R.M. Caddell, Metal Forming, Cambridge University Press, 2007. https://doi.org/10.1017/CBO9780511811111
D.N. Lee, Relation Between Limiting Drawing Ratio and Plastic Strain Ratio, J. Mater. Sci. Lett., 1984, 3, p 677–680. https://doi.org/10.1007/BF00719921
X. Huang, K. Suzuki, A. Watazu, I. Shigematsu, and N. Saito, Improvement of Formability of Mg–Al–Zn alloy Sheet at Low Temperatures Using Differential Speed Rolling, J. Alloys Compd., 2009, 470, p 263–268. https://doi.org/10.1016/j.jallcom.2008.02.029
P.R. Tiwari, A. Rathore, and M.G. Bodkhe, Factors Affecting the Deep Drawing Process–A Review, Mater. Today Proc., 2021 https://doi.org/10.1016/j.matpr.2021.10.189
Y.S. Lee, Y.N. Kwon, S.H. Kang, S.W. Kim, and J.H. Lee, Forming Limit of AZ31 Alloy Sheet and Strain Rate on Warm Sheet Metal Forming, J. Mater. Process. Technol., 2008, 201, p 431–435. https://doi.org/10.1016/j.jmatprotec.2007.11.306
Acknowledgment
This work was financially supported by the Xuzhou Urbanization Renju Environment Design Engineering Technology Research Center of China.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Yu, L. Microstructural Evolution and Mechanical Properties of AZ31 Magnesium Alloy Processed through Constrained Groove Pressing at Different Deformations and Temperatures. J. of Materi Eng and Perform (2024). https://doi.org/10.1007/s11665-023-09102-x
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11665-023-09102-x