Search
Search Results
-
Crumple-recoverable electronics based on plastic to elastic deformation transitions
Crumpling is potentially a quick and efficient way to pack sheet-like electronic devices at a high compression ratio. However, crumpling is not...
-
Utilization of Reclaimed Asphalt Pavement (RAP) and Use of Plastic Waste in Road Construction: Literature Review
Nowadays there is concern about the environment, and ecology has ended up a worldwide issue and is putting nearly each industry accentuation on the...
-
Mechanical and permeability characteristics of Q2 soft-plastic loess under coupled hydro-mechanical conditions
For the soft-plastic loess tunnel engineering, collapse and damage of the surrounding rock during excavation are often driven by the combined action...
-
Influence of Gamma Radiation on the Strength of ABS Plastic Filled with a Short Carbon Fiber
AbstractThe mechanical properties of the ABS plastic filled with 3 wt % of the short carbon fiber subjected to gamma irradiation are studied. It is...
-
Estimating the compressive strength of plastic concrete samples using machine learning algorithms
Determining the mechanical properties of plastic concrete samples through experimental investigation is costly and time-consuming. This research used...
-
Plastic–elastic Model for Water-based Lubrication Considering Surface Force
Water-based lubrication is an effective method to achieve superlubricity, which implies a friction coefficient in the order of 10 −3 or lower. Recent...
-
Research Progress on Prediction Models of Plastic Deformation and Ductile Fracture of Titanium Alloy
AbstractFor further study the influence and role of yield criteria and ductile facture in the plastic deformation process of titanium alloy on...
-
Feasibility of Usage of Waste Plastic as a Bitumen Modifier: A Review
Bitumen is prone to deformations and cracking under severe temperatures and under fatigue. To overcome these drawbacks bitumen is modified by adding...
-
Characteristics of Viscosity of a Scale Inhibitor: An Experimental Study
The use of chemical scale inhibitors in the oil and gas industry for subsea installations has been presented for a long time, but the ever-increasing...
-
Effect of plastic fine and non-plastic fine on the compressibility behavior of granular material
The interaction between fine and sand grains has been studied by several researchers to evaluate the liquefaction phenomenon. However, the fine...
-
Recycling Construction, Renovation, and Demolition Plastic Waste: Review of the Status Quo, Challenges and Opportunities
End-of-life treatment of construction, renovation, and demolition (CRD) plastic waste generated from day-to-day applications of plastics in the...
-
Novel epoxy-bPBD-BisMSB composite plastic scintillator for alpha, beta and gamma radiation detection
A composite plastic scintillator is prepared by uniform dispersion of organic fluorophores 2-(4-Biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole...
-
Intimation of Gravitational Body Forces in Magnetized Transport of Bio-Nanofluid Flow with Bioconvection and Variable Viscosity
On account of technological and industrial applications, nanofluids are more realistic to boost heat transfer as compared to simple fluids....
-
Surface passivation of α-Al2O3 powder using water vapor to achieve consistent slurry viscosity
Based on the significant viscosity variations in the aqueous α-Al 2 O 3 slurries depending on the powder pre-treatments and slurry retention, this study...
-
Viscosity effects and confined cochlea-like geometry in laser-induced cavitation dynamics
On the path to an optoacoustic hearing implant for stimulation of residual hearing, one possibility for tone generation in liquids is the...
-
Alternative finite strain viscoelastic models: constant and strain rate-dependent viscosity
In this study, we present alternative viscoelastic models for materials develo** large strains. The novelty of these models is the definition of...
-
Early Post-yield Contact Behavior of Rigid Sphere Against the Elastic–Plastic Half-Space
The elastic–plastic contact theory states that the early stage of the elastic–plastic contact is mainly dominated by elastic deformation because the...
-
Effect of different waste plastic modifiers on conventional asphalt performance: optimal preparation parameters determination and mechanism analysis
The typical treatment of waste plastics has become a global environmental problem. In light of recent developments, waste plastics used as asphalt...
-
Feasibility Study on the Use of Multilayer Plastic (MLP) Waste in the Construction of Asphalt Pavements
In the last few years, considerable research has been carried out in the country to determine the suitability of plastic waste in the construction of...
-
Viscoelastic–plastic stability analysis of large-section quasi-rectangular pipe-jacking tunnel under-passing box culvert
With the widespread application of large-section quasi-rectangular pipe-jacking tunnels in urban road traffic engineering in China, higher...
