Abstract
The mechanical properties of the ABS plastic filled with 3 wt % of the short carbon fiber subjected to gamma irradiation are studied. It is found that gamma radiation leads to a nonlinear and abrupt change in the mechanical properties of the studied material. IR spectroscopy data show that gamma radiation influences the chemical nature of the ABS plastic surface.
Similar content being viewed by others
REFERENCES
S. Shaffer, K. Yang, J. Vargas, M. A. Di Prima, and W. Voit, “On reducing anisotropy in 3D printed polymers via ionizing radiation,” Polymer 55, 5969–5979 (2014). https://doi.org/10.1016/j.polymer.2014.07.054
A. A. M. Alfayyadh, S. Lotfy, A. A. Basfar, and M. I. Khalil, “Influences of poly(vinyl alcohol) molecular weight and carbon nanotubes on radiation crosslinking shape memory polymers,” Prog. Nat. Sci.: Mater. Int. 27, 316–325 (2017). https://doi.org/10.1016/j.pnsc.2017.04.015
E. R. Klinshpont, V. K. Milinchuk, and V. I. Tupikov, “Radiation resistance of polymer materials,” At. Energy 76, 422–428 (1994). https://doi.org/10.1007/BF02407450
K. S. Bandzierz, L. A. E. M. Reuvekamp, G. Przybytniak, W. K. Dierkes, A. Blume, and D. M. Bielinski, “Effect of electron beam irradiation on structure and properties of styrene-butadiene rubber,” Radiat. Phys. Chem. 149, 14–25 (2018). https://doi.org/10.1016/j.radphyschem.2017.12.011
H. De Brouwer, “Comparison of the effects of X-ray and gamma irradiation on engineering thermoplastics,” Radiat. Phys. Chem. 193, 109999 (2022). https://doi.org/10.1016/j.radphyschem.2022.109999
E. Craven, F. Hasanain, and M. Winters, “Minimizing material damage using low temperature irradiation,” Radiat. Phys. Chem. 81, 1254–1258 (2012). https://doi.org/10.1016/j.radphyschem.2012.01.013
E. A. Lebedeva, S. A. Astaf’eva, T. S. Istomina, D. K. Trukhinov, A. Sh. Shamsutdinov, V. N. Strel’nikov, A. I. Kukharenko, and I. S. Zhidkov, “Novel approach to recycled carbon fiber suitability assessment for additive technologies,” Appl. Surf. Sci. 602, 154251 (2022). https://doi.org/10.1016/j.apsusc.2022.154251
A. Abdel-Hakim, S. A. El-Mogy, and M. M. EL-Zayat, “Radiation crosslinking of acrylic rubber/styrene butadiene rubber blends containing polyfunctional monomers,” Radiat. Phys. Chem. 157, 91–96 (2019). https://doi.org/10.1016/j.radphyschem.2019.01.004
A. Yadegari, U. Gohs, H.-A. Khonakdar, and U. Wagenknecht, “Influence of post-irradiation conditions on crosslinking and oxidation of microporous polyethylene membrane,” Radiat. Phys. Chem. 193, 109997 (2022). https://doi.org/10.1016/j.radphyschem.2022.109997
V. V. Shpeizman, N. N. Peschanskaya, P. N. Yakushev, A. S. Smolyanskii, A. S. Shvedov, and V. G. Cheremisov, “Nanoscale deformation irregularities of γ-irradiated poly(methyl methacrylate),” Phys. Solid State 52, 265–270 (2010).
N. N. Peschanskaya, A. S. Smolyanskii, and A. S. Shvedov, “Jumplike deformation of γ-irradiated polymethyl methacrylate,” Phys. Solid State 51, 1293–1297 (2009).
P. Wady, A. Wasilewski, L. Brock, R. Edge, A. Baidak, C. McBride, L. Leay, A. Griffiths, and C. Valles, “Effect of ionising radiation on the mechanical and structural properties of 3D printed plastics,” Addit. Manuf. 31, 100907 (2020). https://doi.org/10.1016/j.addma.2019.100907
ACKNOWLEDGMENTS
This work was performed using equipment of the Center for Collective Use “Studies of Materials and Substances” of the Perm Federal Research Center of the Ural Branch of the Russian Academy of Sciences.
Funding
This work was supported by Government of the Perm Territory within the framework of the scientific project no. C-26/581.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by A. Tulyabaew
Rights and permissions
About this article
Cite this article
Lebedeva, E.A., Trukhinov, D.K., Kornilitsina, E.V. et al. Influence of Gamma Radiation on the Strength of ABS Plastic Filled with a Short Carbon Fiber. Polym. Sci. Ser. D 16, 522–525 (2023). https://doi.org/10.1134/S1995421223030176
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421223030176