Search
Search Results
-
Effect of the Scale Factor on the Elastic Modulus Determined by Instrumented Indentation
Abstract —The effect of the scale factor on the elastic modulus determined by instrumented indentation in the elastic and elastoplastic regions of...
-
Effect of Cr Concentration and Oxide Scale Composition in Hot Rolling Tools
Hot rolling tools composed mainly of Fe, such as plugs for seamless pipe rolling, is generally used with iron oxide scale on the outer surface of the...
-
Revealing the Deterioration Effect of Scale Inhibitor on the Performance of Corrosion Inhibitor under Dynamic Conditions
Currently, the scale inhibitor (SI) and corrosion inhibitor (CI) have been massively applied in the oil gathering and transportation applications,...
-
Effect of Polyvinyl Alcohol in Inner Aqueous Phase on Stability of Millimeter-scale Capsules
The millimeter-scale capsules with controllable morphology, ultra-low permeability and excellent mechanical stability were fabricated by...
-
An Expanded Model for the Pressure Effect in Metal Dusting of Mn-Containing Alloy 600 Based on Advanced Scale Characterization
Commercial alloy 600 was exposed to a metal dusting inducing gas mixture to investigate the effect of ambient and elevated pressures on the oxide...
-
Chiral effect on Aβ fibrillation from molecular-scale to nanoscale
β-Amyloid (Aβ) peptide fibrillation, one of the characteristic hallmarks of Alzheimer’s disease, is determined by many interfacial physical-chemical...
-
Electrochemical field-effect bio-transistor based on a multi-scale electronic nanomesh of single-walled carbon nanotubes
Single-walled carbon nanotube (SWNT) has gained significant interest as a transducer in various electrochemical sensing devices due to their unique...
-
Macro-scale Compositional Inhomogeneity in Friction Stir Processed Mg–Al–Zn Cast Alloy and Its Effect on Mechanical Property
It has long been considered that compositional homogeneity would not be altered on the macro-scale by solute segregation during friction stir...
-
Effect of Cu Additions on Scale Structure and Descaling Efficiency of Low C Steel Reheated in a Combustion Gas Atmosphere
Modern EAF steelmaking employs scrap as its primary source of raw material. Different sources of scrap have varying levels of residuals, which can...
-
Synergistic effect of Mill scale and MoS2 in geopolymer composites for EMI shielding application
This study reports the development of a synergistic composition of geopolymer for EMI shielding building material using micron-sized molybdenum...
-
Effect of TiAlNbCrSi Alloy Microstructure Produced by Mould Casting (MC) or Electron Beam Powder Bed Fusion (EB-PBF) on Scale Grown Under Dry Air and Steam
TiAl parts fabricated with additive manufacturing have begun to find applications in car and aviation industry. Optimization of their properties...
-
Effect of Hot-Rolled Oxide Scale on Dry/Wet Cyclic Corrosion Behavior of Q370qNH Steel in Simulated Industrial Atmosphere Environment
The corrosion behavior of Q370qNH steel in the presence and absence of hot-rolled oxide scale in simulated industrial atmospheric environment was...
-
Effect of Time Step Scale Factor Value on the Low Velocity Impact Numerical Simulation Results in LS-DYNA
The major focus of this investigation is to analyze the effect of the time step scale factor (TSSFAC) parameter value on the numerical simulation...
-
Elevating the performance of nanoporous bismuth selenide incorporated arch-shaped triboelectric nanogenerator by implementing piezo-tribo coupling effect: harvesting biomechanical energy and low scale energy sensing applications
With the increasing demand of environmental friendly and unlimited power supplies, the use of triboelectric nanogenerator (TENG) also increases due...
-
Effect of Ore Pre-heating on Furnace Operation in High Carbon Ferromanganese Production—Lessons Learnt from Pilot-Scale Test Work
The EU-funded PreMa project investigated the potential for a preheating stage to reduce the electrical energy requirement and CO2 emissionsCO2...
-
Effect of scale formation and CP potentials on AC-induced pitting corrosion of low carbon steels
AbstractThe effect of AC voltages, cathodic protection (CP) potentials and calcareous scale on the pitting corrosion of carbon steel 1010 was...
-
Effect of Strain on Atomic-Scale Friction in Two-Dimensional Graphene/ZrS2 van der Waals Heterostructure
The study of the strain of nano-friction is of great significance to improve our understanding of the friction behavior of two-dimensional (2D)...
-
Large-scale fabrication of structurally coloured cellulose nanocrystal films and effect pigments
Cellulose nanocrystals are renewable plant-based colloidal particles capable of forming photonic films by solvent-evaporation-driven self-assembly....
-
Effect of the Temperature–Speed Hot-Rolling Conditions on Scale Formation
AbstractThe influence of the parameters of a through technology on a rolled-in scale defect is analyzed. To study the influence of the temperature...
-
Rational design and synergistic effect of ultrafine Ag nanodots decorated fish-scale-like Zn nanoleaves for highly selective electrochemical CO2 reduction
The electrocatalytic CO 2 reduction reaction (CO 2 RR) is regarded as a promising route for renewable energy conversion and storage, but its development...
