Search
Search Results
-
Effect of dislocations and impurities on carrier transport in α-Ga2O3 on m-plane sapphire substrate
Carrier transport mechanism in Si-doped n-type α-Ga 2 O 3 thin film on m-plane sapphire substrate was investigated by temperature-dependent Hall effect...
-
Photoelectrochemical and photo-Fenton properties of ZnFe2O4@g-C3N4 nanocomposites
In the social context of increasing water pollution, we conducted an in-depth study to prepare ZnFe 2 O 4 @g-C 3 N 4 heterojunction nanocomposites by...
-
Do** N/O Impurities into a MoNbTiWZr Refractory Multi-Principal Element Alloy and the Strengthening Mechanism
A MoNbTiWZr refractory multi-principal element alloy with N and O impurities was sintered by mechanical alloying (MA) followed by the hot-press...
-
Study of impurities diffusion in Al2O3/GaN/AlxGa1−xN hetero-structures
Multilayer GaN/Al x Ga 1− x N structures were grown on a sapphire substrate using metalorganic chemical vapor deposition at atmospheric pressure. The...
-
The Role of O2 and H2O Impurities in Dictating the Oxidation Mechanism and Protective Capacity of 9Cr Steels in Hot CO2
The initial stages of oxidation of 9Cr steel in CO 2 , O 2 , CO 2 –O 2 and CO 2 –O 2 –H 2 O is studied by gas phase analysis (GPA) at 550 °C using 13 C 16,16 O 2 , 18,18 O...
-
Efficient NiFe2O4@g-C3N4 Nanosorbent for Oxytetracycline Adsorption: Removal Modeling and Selectivity
Nanosorbent NiFe 2 O 4 @g-C 3 N 4 was produced via green and ultrasonication methods to remove oxytetracycline (OTC) from aqueous solutions. The prepared...
-
Effect of Oxygen and Silicon Impurities on the Structural and Physicochemical Properties of the Nickel Melts
AbstractThe effect of oxygen and silicon impurities on the structural and physicochemical properties of the nickel melts is studied in performing...
-
Migration regularities of impurities C, O, Fe, Co and Ni and effect of crystal transition on C, O and Fe in purification of metal La by solid-state electrotransport
AbstractMigration regularities of impurities C, O, Fe, Co and Ni and the effect of crystal transition on C, O and Fe in purification of metal La by...
-
Improvement in optoelectronics and photovoltaic properties of p-Co3O4/n-ZnO hetero-junction: effect of deposition time of sprayed Co3O4 thin films
Spinel thin films Co 3 O 4 have been deposited at a temperature of approximately 400 °C using spray pyrolysis. The testimony process was carried out...
-
Efficient photocatalytic degradation of Congo red and other dyes by ternary TiO2/Y2O3@g-C3N4 nanohybrid
A ternary TiO 2 /Y 2 O 3 @g-C 3 N 4 nanocomposite was fabricated by a simple sonochemical method and its photocatalytic activity for organic pollutants was...
-
Bayer Process Impurities and Their Management
Impurities introduced into or generated by the Bayer alumina production process can have a detrimental effect on the efficiencies or productivity of... -
Strong high-entropy diboride ceramics with oxide impurities at 1800°C
In this study, a type of high-entropy boride (HEB) ceramics ((Ti 0.2 Zr 0.2 Nba 0.2 Hfa 0.2 Taa 0.2 )B 2 ) with ∼2vol% oxides and ∼1 vol% porosity was...
-
Improving both performance and stability of n-type organic semiconductors by vitamin C
Organic semiconductors (OSCs) are one of the most promising candidates for flexible, wearable and large-area electronics. However, the development of...
-
Impact of Zn Do** on the Photorefractive Effect and Structural Properties of Lithium Niobate
The aim of this study is to conduct theoretical investigations on the structural properties of lithium niobate (LiNbO3) doped with different... -
Adsorption and interaction of CO2 and N2O on NaOH-impregnated activated carbon surface
Commercial activated carbon (AC) was selected and impregnated with sodium hydroxide. The carbons were characterized for their surface area,...
-
Maximizing power generation in single-chamber microbial fuel cells: the role of LiTa0.5Nb0.5O3/g-C3N4 photocatalyst
Microbial fuel cells (MFCs) have attracted a great deal of attention as a promising technology for recovering electricity from organic substances by...
-
Structural-Phase Composition and Hardness of Steel of the Fe–Cr–Mn–Mo–Al–Mg–N–C System Obtained by the Method of Self-Propagating High-Temperature Synthesis Under Nitrogen Pressure
The possibility of obtaining solid ingots (without gas porosity) of steel of the Fe–Cr–Mn–Mo–Al–Mg– N–C system by the method of self-propagating...
-
Full β-Ga2O3 films-based p-n homojunction
Fabricating the p-n junction and exploring the device physics play key roles in develo** various functional devices and promoting their practical...
-
High-Temperature Corrosion of Chromia-Forming Ni-Based Alloys in CO2 Containing Impurities
Future technologies require structural materials resistant to environmental degradation in high-temperature CO 2 -rich environments. Herein, we exposed...
-
Thermodynamics of Impurities Removal From Si–Fe Alloy by CaO–Al2O3–SiO2–Na2O Slag Refining
Slag refining of molten Si–Fe alloy was investigated with the ultimate goal of producing silicon suitable for solar cell application. Multiple...