Skip to main content

previous disabled Page of 2
and
  1. No Access

    Article

    Structure, Oxygen Mobility, and Electrochemical Characteristics of La1.7Ca0.3Ni1 ‒ xCuxO4 + δ Materials

    The Ruddlesden‒Popper phases pertain to numerous promising materials with the mixed ionic-electronic conductivity used in devices such as oxygen-conducting membranes, solid oxide fuel cells (SOFC), and electro...

    V. A. Sadykov, E. M. Sadovskaya, N. F. Eremeev in Russian Journal of Electrochemistry (2023)

  2. No Access

    Article

    Formation of a Single- and Two-Layer Solid Electrolyte by Electrophoresis on Anodic Substrates Metalized with Silver or Platinum

    A study is performed of the possibilities of the electrophoretic deposition (EPD) of a single- and two-layer film electrolyte based on Ce0.8Sm0.2O1.9 (SDC) and BaCe0.8Sm0.19Cu0.01O3 (BCSCuO). The materials are de...

    E. G. Kalinina, E. Yu. Pikalova in Russian Journal of Physical Chemistry A (2022)

  3. No Access

    Article

    Modifying Suspensions for the Electrophoretic Deposition of BaCe0.5Zr0.3Y0.1Yb0.1O3–δ Solid Electrolyte

    Powder of proton-conducting BaCe0.5Zr0.3Y0.1Yb0.1O3−δ (BCZYYbO) electrolyte is synthesized using the citrate–nitrate technique. The dispersity of the BCZYYbO suspension in a mixed medium (isopropanol/acetylaceton...

    E. G. Kalinina, E. Yu. Pikalova in Russian Journal of Physical Chemistry A (2021)

  4. No Access

    Article

    Preparation and Properties of Stable Suspensions of ZrO2–Y2O3 Powders with Different Particle Sizes for Electrophoretic Deposition

    This paper presents a study of nonaqueous suspensions based on ZrO2–8 mol % Y2O3 (8YSZ) powders and describes the use of the powders for producing thin-film coatings on a La2NiO4 (LNO) substrate by electrophoreti...

    E. G. Kalinina, E. Yu. Pikalova in Inorganic Materials (2020)

  5. No Access

    Article

    Assessment of prospective cathodes based on (1-x)Ca3Co4O9+δ-xBaCe0.5Zr0.3Y0.1Yb0.1O3-δ composites for protonic ceramic electrochemical cells

    This work presents investigation of novel composite electrodes comprising misfit layered oxide Ca3Co4O9+δ and protonic conductor BaCe0.5Zr0.3Y0.1Yb0.1O3-δ. Materials for the study were synthesized by the pyrolysi...

    E. A. Filonova, E. S. Tokareva, N. S. Pikalova in Journal of Solid State Electrochemistry (2020)

  6. No Access

    Article

    Oxygen Mobility in the Materials for Solid Oxide Fuel Cells and Catalytic Membranes (Review)

    Oxygen transport (including oxygen mobility and surface reactivity) is one of the important factors governing electrochemical activity of solid oxide fuel cells electrodes as well as oxygen and hydrogen separa...

    V. A. Sadykov, E. M. Sadovskaya, N. F. Eremeev in Russian Journal of Electrochemistry (2019)

  7. No Access

    Article

    Formation of Thin-Film Electrolyte by Electrophoretic Deposition onto Modified Multilayer Cathode

    Possibility of forming a gas-tight thin-film solid electrolyte by the electrophoretic deposition method on a modified multilayer cathode was examined. The main goal of the study was to find such technological ...

    E. G. Kalinina, N. M. Bogdanovich, D. I. Bronin in Russian Journal of Applied Chemistry (2019)

  8. No Access

    Article

    Electrical and Mechanical Properties of CeO2-Based Thin-Film Coatings Obtained by Electrophoretic Deposition

    Nanometer Ce0.8(Sm0.75Sr0.20Ba0.05)0.2O2 – δ powder with mean nanoparticle size of 15 nm has been obtained by laser evaporation of a solid-phase target followed by condensation. The nanopowder has been used to pr...

    E. G. Kalinina, E. Yu. Pikalova, S. V. Scherbinin in Technical Physics (2018)

  9. No Access

    Article

    Formation of Bilayer Thin-Film Electrolyte on Cathode Substrate by Electrophoretic Deposition

    Potentialities of the method of bilayer thin-film electrolyte electrophoretic deposition onto cathodic substrate are analyzed. Ce0.8Sm0.2O1.9–δ (SDC) nanopowder and BaCe0.89Gd0.1Cu0.01O3–δ BCGCuO) micropowder are...

    E. G. Kalinina, E. Yu. Pikalova, A. A. Kolchugin in Russian Journal of Electrochemistry (2018)

  10. No Access

    Article

    Reversible Solid Oxide Fuel Cell for Power Accumulation and Generation

    The anodic and cathodic polarization dependences for the oxygen electrode based on lanthanum-strontium manganite and the fuel Ni-cermet electrode are studied in the temperature range of 700–900°С in gas media ...

    D. A. Osinkin, N. M. Bogdanovich, S. M. Beresnev in Russian Journal of Electrochemistry (2018)

  11. No Access

    Article

    Oxygen isotope exchange in praseodymium nickelate

    Oxygen surface exchange kinetics and diffusion were studied in Pr2NiO4 + δ (PNO) by the isotope exchange method with gas phase equilibration in the temperature range of 600–800 °C and oxygen pressure range of 0.3...

    N. M. Porotnikova, A. V. Khodimchuk in Journal of Solid State Electrochemistry (2018)

  12. No Access

    Article

    Electrophoretic Deposition of Thin-Film Coatings of Solid Electrolyte Based on Microsize BaCeO3 Powders

    Results are presented of an electrophoretic deposition of thin-film coatings based on doped barium cerate BaCeO3 on a cathode substrate La2NiO4 (LNO), which are of interest for the technology of medium-temperatur...

    E. G. Kalinina, E. Yu. Pikalova, A. S. Farlenkov in Russian Journal of Applied Chemistry (2018)

  13. No Access

    Article

    Transport features in layered nickelates: correlation between structure, oxygen diffusion, electrical and electrochemical properties

    Oxygen migration is increasingly acknowledged as playing an important role in the ionic transport in mixed conductors and influencing the electrode electrochemical performance. The aim of this work was to esta...

    V. A. Sadykov, E. M. Sadovskaya, E. Yu. Pikalova, A. A. Kolchugin, E. A. Filonova in Ionics (2018)

  14. No Access

    Article

    Specifics of the Electrical Properties of Composite Solid Oxide Membranes Based on SrTi0.5Fe0.5O3–δ

    The electrical properties of dual-phase fluorite-pervoskite oxide systems based on strontium titanate- ferrite (SrTi0.5Fe0.5O3–δ) are studied. We find that the oxygen ionic and ambipolar conductivities of stronti...

    V. V. Sal’nikov, E. Yu. Pikalova, A. A. Kol’chugin, I. V. Nikolaenko in Technical Physics (2018)

  15. No Access

    Article

    Preparation of thin bilayer coatings based on lanthanum, nickel, and cerium mixed oxides by electrophoretic deposition

    This paper examines the feasibility of using electrophoretic deposition for producing thin films of cathode materials based on lanthanum nickel oxides (with the lanthanum nickelate La2NiO4 + δ (LNO) as the predom...

    E. G. Kalinina, E. Yu. Pikalova, A. P. Safronov in Inorganic Materials (2017)

  16. No Access

    Article

    Gd-doped SrTi0.5Fe0.5O3–δ mixed ionic-electronic conductors: structural, thermal, and electrical properties

    The effect of Sr by Gd substitution on the structural, thermomechanical, electrical, and electrochemical properties of SrTi0.5Fe0.5O3–δ was investigated in the present work. The powders were synthesized by a soli...

    A. A. Murashkina, E. Yu Pikalova, D. A. Medvedev in Ionics (2017)

  17. No Access

    Article

    Electrochemical properties of doped lantanum–nickelate-based electrodes

    This work is devoted to the studying of effects of La2NiO4 do** with alkaline-earth elements: Ca, Sr, and Ba (at an amount of 15 mol %) on its structural, electrical, and electrochemical properties. The effects...

    A. A. Kol’chugin, E. Yu. Pikalova, N. M. Bogdanovich in Russian Journal of Electrochemistry (2017)

  18. No Access

    Article

    Composite electrodes for proton conducting electrolyte of CaZr0.95Sc0.05O3 – δ

    A new method of obtaining gastight ceramic based on CaZr0.95Sc0.05O3 – δ is presented. The microstructure and electric properties of the obtained samples, same as the behavior of composite electrodes in contact w...

    E. Yu. Pikalova, N. M. Bogdanovich, A. V. Kuz’min in Russian Journal of Electrochemistry (2017)

  19. No Access

    Article

    Aggregatively stable suspensions of micrometer powders of doped barium cerate for electrophoretic deposition of thin-film coatings of solid-oxide fuel cells

    Potentialities of the method of electrophoretic deposition of thin-film coatings based on micrometer powders of multidoped barium cerate BaCe0.8Sm0.19Cu0.01O3–δ (BCSCuO) and BaCe0.89Gd0.1Cu0.01O3–δ (BCGCuO) were ...

    E. G. Kalinina, E. Yu. Pikalova, V. D. Zhuravlev in Russian Journal of Applied Chemistry (2017)

  20. No Access

    Article

    A study of the electrophoretic deposition of thin-film coatings based on barium cerate nanopowder produced by laser evaporation

    The method of laser ablation of a target, followed by condensation, was used to obtain a weakly aggregated BCSO nanopowder from barium cerate. The dispersity, fraction composition of the nanopowder, electrokin...

    E. G. Kalinina, E. Yu. Pikalova, A. P. Safronov in Russian Journal of Applied Chemistry (2017)

previous disabled Page of 2