-
Chapter
Super Light Alloy Al-Cu-Li-Fatigue Crack Growth Resistance at Temperatures 293 and 77K
The aim of this study was to investigate fatigue crack growth resistance of a new superlight high-strength Al-Cu-Li alloy at 293 and 77K and to assess the possibility of its application in cryogenic aerospace ...
-
Article
Fatigue life and fracture mode of Al-Cu-Li 1460 alloy at room temperature and cryogenic temperatures in various environments
-
Article
Effect of cryogenic temperatures and high vacuum on the fatigue strength of plates made of aluminum-lithium alloy 1460
The fatigue strength and fractography of age-hardened aluminum-lithium alloy 1460 cut from a plate in the longitudinal direction has been studied. The tests were carried out under conditions of asymmetrical lo...
-
Article
Increasing the cyclic endurance of a titanium alloy in air at 293 and 203 K using a fluoroplastic coating
-
Article
Cyclic cracking resistance and failure of VT22 titanium alloy at low temperatures
-
Article
Machine for fatigue testing of materials in a vacuum at temperatures in the range of 293-11 K
-
Article
Effect of low temperature on the cyclic longevity and crack resistance of titanium alloy VT5-1kt
-
Article
A study of the slag-induced wear of the refarctories made from magnesia-spinellid bodies with an argillaceous binder
Among the experimental additives introduced into the composition of the magnesia-spinellid bodies, the highest resistance to the synthetic slag is exhibited by the fused and the sintered spinels and electrocor...
-
Article
Guniting of the monolithic lining of steel-teeming ladles
The authors have developed the principles of guniting the monolithic lining of steel-teeming ladles with semidry masses. Determination of the wetting of a vitrified siliceous monolithic lining with aqueous sol...
-
Chapter
Fatigue and Friction Behavior of Superconductors in Various States
Some changes in macroscopic plasticity at a superconducting transition were found experimentally in 1968 at the Physico-Technical Institute of Low Temperatures, Kharkov [1]. A great number of experiments has been...
-
Article
Quartz-ceramic batchers for steelcasting on CICM
The material VIO-20N based on fused quartz does not react with chrome-nickel alloys and is not wetted by their melts. Tests carried out with floating bowls of this material demonstrated the efficient action of...
-
Article
The environment and low-temperature fatigue tests
-
Article
Kinetics and mechanism of fatigue fracture of magnesium alloys MA 2-1 and MA 12
-
In the upper region of the σ-N curve, fatigue fracture of magnesium alloys MA2-1 and MA12 can take place by d...
-
-
Article
Gunites for steelcasting ladles
An investigation showed that the cheapest Gunite with good technical indices consists of a grog-clay mix based on kaolinized grog with 10% clay of grade DN1 and a binder in the form of an aqueous solution of w...
-
Article
Guniting the lining of steel-casting ladles
In a joint investigation by the Serp i Molot Metallurgical Plant in Moscow and the All-Union Institute of Refractories the advantages were demonstrated of guniting the lining of steel-casting ladles. The first...
-
Article
Effect of a vacuum on the service life of copper
-
Article
Fatigue failure of copper at low temperatures
-
The increase in the durability of polycrystalline copper when the temperature of cyclic deformation is lowere...
-
-
Article
Fatigue strength of copper under cyclic loading conditions at low temperature and in vacuum
-
It was shown that the fatigue life of copper is higher at low tempertaure than at room temperature.
...
-