![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Experimental investigation of the thermocyclic loading of disperse-reinforced composite materials
-
Article
Effect of radiation heating on the creep of polymeric materials
-
Article
MRV-1M multiposition unit for testing polymer materials in vacuo and in gaseous media
-
Article
Investigation of the working characteristics and antifriction properties of solid lubricant coatings in high vacuum and in air and analysis of gases evolved during friction
-
Article
Effect of original structure on wear of steel 40Kh in vacuum at − 190 and +20°C
-
The increase in the wear of steel 40Kh subjected to different heat treatments during friction in vacuum at 20...
-
-
Article
Effect of the slip rate on wear at low temperatures
-
The difference in wear at the slip rates investigated is due to the hardening of the surface, depending on th...
-
-
Article
Friction and wear at low temperatures
-
For indentors (steel G13L) lowering the temperature has no effect on wear in air or in vacuum.
...
-
-
Article
Mass-spectrometric investigation of solid lubricating coatings subjected to friction in a deep vacuum
The life of solid lubricating coatings of the VNII NP type, based on molybdenum disulfides and various binders, has been experimentally investigated under deep vacuum conditions (10−8−5 · 10−9 torr) together with...
-
Article
Investigation of the efficiency of type VNII NP-213 solid lubricant coating
-
Article
The behavior of molybdenum disulfide based solid film lubricants during friction tests under high vacuum
-
Organic film formers such as epoxide and urea-formaldehyde resins may be used under high vacuum since they gi...
-
-
Article
Apparatus for studies of friction and wear in vacuum
This article describes an apparatus for investigating friction and wear in vacuum (at pressures down to 10−9 torr) in the presence of residual gases of a predetermined composition. The apparatus consists of a vac...
-
Article
The structure of working surfaces during friction in vacuum
-
Article
Fatigue strength of copper under cyclic loading conditions at low temperature and in vacuum
-
It was shown that the fatigue life of copper is higher at low tempertaure than at room temperature.
...
-
-
Article
Friction in vacuum
The effect of degree of vacuum on the friction of steel 45 was studied. It was observed that changes produced in the composition of residual gases and in the heat transfer conditions by changes in residual pre...