Search
Search Results
-
Microstructure, Mechanical, and Corrosion Properties of 304 Stainless Steel-H13 Tool Steel Composite Cold Spray Coatings
The main objective of this work is to investigate the microstructure, mechanical and corrosion properties of 304 stainless steel-H13 composites...
-
Erosion Behaviors and Mechanisms of Low-Carbon Steel and Alloy Tool Steel in Commonly Used Molten Aluminum Alloys
The erosion behaviors and mechanisms of low-carbon steel and alloy tool steel in several commonly used molten Al alloys were investigated via erosion...
-
An Evaluation of WC-Co Tool Tip Scraps Reinforcement in the Hadfield Austenitic Manganese Steel Fabricated In Situ Steel Casting
Research on the use of WC-Co tool tip scraps inserts into Hadfield austenitic manganese steel was conducted to enhance the wear resistance of a...
-
Machinability of High Mn Steel Using Tool Life Criteria
High Mn steel alloys have shown to provide both high strength and ductility. However, current literature offers limited guidance on the machinability...
-
Effect of Heat Treatment on Fatigue Strength and Frequency Stability of Tool Steel 6KhS
The effect of heat treatment on the fatigue processes develo** in tool steel 6KhS loaded by a “soft” scheme of cantilever bending of flat specimens...
-
Influence of Heat and Cryogenic Treatments on the Abrasive Wear Behavior of H13 Tool Steel
This study analyzes the influence of cryogenic treatments, before the pre-tempering treatment on the microstructure, and the mechanical properties of...
-
Barkhausen Noise Signal Analysis of IS 2062 Steel and AISI D2 Tool Steel with Different Range of Magnetizing Frequency and Intensity
AbstractSignal processing is essential to extract precise and transparent information about the characterization of the ferromagnetic materials...
-
Thermal Stability of Laser-Clad Tool Steel with Fine Tungsten Carbide Particle Addition
Thermal stability of laser-modified surfaces is crucial for hot working conditions. Refined grain structure from the rapid solidification can only...
-
Influence of Laser Radiation on the Depth of Hardened Layer of Tool Steel Cutting Dies
The results of experimental studies into the impact of laser radiation on the depth of the hardened layer of cutting dies made of carbon and alloy...
-
Study on Equilibrium and Non-equilibrium Solidification of Boron-Containing High-Speed Tool Steel: Effect of Cooling Rate and Microstructure Investigation
This work intends to understand the microstructure evolution of new and enhanced boron-containing high-speed tool steel. The solidification reactions...
-
Processability and Microstructural Evolution of W360 Hot Work Tool Steel by Directed Energy Deposition
Laser directed energy deposition (L-DED) was used to produce samples of the newly patented W360 hot work tool steel by Böhler. The process parameters...
-
Analysis of the Anomalous Effect of Heat Treatment on the Structure and Phase Transformations in High-Chromium Tool Steel
The effect of various heat treatments with heating to 1030 – 1250°C on the structure and microhardness of high-chromium tool steel 160Kh12MF is...
-
Study of the Influence of Surface Treatment with a Flexible Tool on the Cyclic Durability Resistance of Steel Grade 25
AbstractThe influence of surface treatment with a flexible tool with the simultaneous application of a brass coating on grade 25 steel on resistance...
-
Layered hardening and grain structure refinement of low-alloyed tool steel applying two-stage surface morphology modification by laser phase transformation and ultrasonic peening
This work is focused on the effects of the laser heat treatment (LHT) followed by ultrasonic impact treatment (UIT) on the surface texture and...
-
Laser Directed Energy Deposition of High-Carbon High-Chromium D2 Tool Steel Structures: Processing, Heat Treatment and Material Behavior
The tooling industry is one of the sectors that demands the deployment of advanced manufacturing techniques, like-laser directed energy deposition...
-
Wear-Resistant Composites Produced from Tool Steel Waste for Contact Joints of High-Speed Printing Machines
The paper examines the effect of do** elements on the structurization and properties of a new antifriction composite produced from grinding waste...
-
Effects of the Ultrasonic Surface Rolling Process on the Surface Integrity, Wear Resistance, and Corrosion Resistance of 4Cr5MoSiV1 Tool Steel Before and After Quenching
Quenched 4Cr5MoSiV1 tool steel is commonly used as a material for tablet presser dies. However, it exhibits high sensitivity to temperature and...
-
Niobium Carbide Coatings Grown on Cold Work Tool Steel AISI D3 by Thermomechanical Processing: Characterization, Wear and Corrosion Behaviors
AbstractIn this study, niobium carbide (NbC) coatings were grown on AISI D3 cold work tool steel via thermoreactive diffusion (TRD) at 900, 1000 and...
-
The Influence of Heat Treatment on Structural and Mechanical Properties of the Tool Steel
The present research work aims to study the heat treatment effect on the structural and mechanical properties of the tool steel AISI D2. The steel...
-
Microstructural Characterization of Pack-Borided H13 Tool Steel Processed Using Directed Energy Deposition
H13 tool steel samples were prepared using directed energy deposition (DED) and were then pack-borided at temperatures of 800 °C, 850 °C, 900 °C, or...