Search
Search Results
-
Effect of Dry Friction on the Subsurface Structure of a Sintered Al–7Fe–38Sn Composite Material
Abstract —The subsurface macrostructure of a sintered Al–7Fe–38Sn composite material, which forms during the rotation of a flat steel bar pressed...
-
Effect of Solid Solution Treatment on the Wear Behavior and Subsurface Microstructure of 2205 Duplex Stainless Steel in Different Environments
This study investigated the friction and wear performance and the subsurface microstructure characteristics of 2205 duplex stainless steel under...
-
Impact of the aqueous corrosion induced alteration layer on mechanical properties of pharmaceutical glasses
It is known that network modifying ions (such as alkali or alkaline earth ions) make glasses susceptible to aqueous corrosion, resulting in the...
-
Flow Characteristics in Subsurface Storm Water Perforated Pipe for Drainage System Application
This study investigates the performance of a subsurface stormwater perforated pipe as a subsurface conveyance component in a laboratory flume at...
-
Microstructure and properties of gradient nitrided layer on Ti6Al4V alloys
The vacuum electromagnetic induction nitriding technology was applied to prepare a gradient nitrided layer on the surface of a Ti6Al4V alloy, which...
-
The influence of drilling speed on the evolution mechanism of subsurface defects in single crystal 3C-SiC in molecular dynamics
To investigate the effect of drilling speed on the molecular dynamics and subsurface defect evolution mechanism of 3C-SiC single crystals, a coupled...
-
Surface Oxidation and Subsurface Deformation in a Laser-Peened Ti-6Al-4V
Laser peening without coating (LPwC) was carried out at multiple passes on Ti-6Al-4V at a power density of 6 GW cm −2 . Tensile residual stress...
-
Tribological Characteristics, Phase Composition and Microhardness of Subsurface Regions of WC–(Fe–Mn–C) Composites after High-Speed Sliding on Steel
AbstractThe authors investigated tribological characteristics, phase composition of worn surfaces and microhardness of subsurface regions of...
-
Subsurface Deformation Mechanism in Nano-cutting of Gallium Arsenide Using Molecular Dynamics Simulation
During the nano-cutting process, monocrystalline gallium arsenide is faced with various surface/subsurface deformations and damages that...
-
Synergistic Effect of B and Y Micro-alloying on Oxide-Layer Formation on the Super-austenitic S31254 Stainless Steel
Aiming to address the Mo volatilization problem of super-austenitic stainless steel at high temperature, the S31254 steel containing B and rare earth...
-
Analyzing the Influence of Simultaneously Austenitization and Multi-Directional Boriding on the Surface and Subsurface of H13 Tool Steel
AISI H13 hot tool steel is very much famous for elevated temperature operations such as manufacturing of dies, molds, glass, and plastics. In order...
-
CO2 gas sensing properties of ZnO nanorods: comparison of seed layer deposition temperature
In this work, ZnO nanorods were grown by chemical bath deposition technique on substrates which were previously deposited with ZnO seed layers...
-
Evaluation of the State of Subsurface Layers of the Metal Subjected to Shot Peening with the Help of Surface Acoustic Waves
We study the surface layers of the metal of low-carbon steel after shot peening. The velocity of surface Rayleigh waves is determined by the...
-
Topography of the Surface and Subsurface Layers of Grinding Balls Operating in Dry and Wet Grinding Modes
AbstractThe surface topography’s subsurface layer condition and the wear elements of balls operated in the mills using wet and dry grinding are...
-
Subsurface-initiated atom transfer radical polymerization: effect of graft layer thickness and surface morphology on antibiofouling properties against different foulants
AbstractIn this work, time-dependent growth of a poly(sulfobetaine methacrylate) (PSBMA) layer was realized on initiator-embedded and hydrophilic...
-
Gradient Characteristics of Surface Metamorphic Layer Microstructure Induced by Longitudinal Torsional Ultrasonic-Assisted Milling Ti-6Al-4 V Alloy
Surface metamorphic layer formed in milling has an obvious effect on the fatigue properties and reliability of critical components in different...
-
Enhancing IR Thermographic Inspection of Subsurface Defects by Using the Technique of Edge Detection
AbstractThis paper presents a novel method for separating subsurface defects in cured preimpregnated carbon fiber reinforced polimer specimens on...
-
Progressive Induction Hardening: Measurement and Alteration of Residual Stresses
Progressive induction hardening is an in-line steel heat treatment method commonly used to surface harden powertrain components. It produces a...
-
Giant valley-Zeeman coupling in the surface layer of an intercalated transition metal dichalcogenide
Spin–valley locking is ubiquitous among transition metal dichalcogenides with local or global inversion asymmetry, in turn stabilizing properties...
-
Negatively charged insulated boron nitride nanofibers directing subsurface zinc deposition for dendrite-free zinc anodes
The practical application of aqueous zinc-ion batteries (ZIBs) is limited by the growth of dendrite during cycling. How to rationally design and...
