Search
Search Results
-
Heat Transfer and Fluid Flow During Laser Powder Bed Fusion of SS316L Stainless Steel
Powder bed fusion using a laser-based (PBF-LB) process offers design freedom with an acceptable surface finish in several industrial applications....
-
Numerical Simulation of Transient Flow and Heat Transfer in a Steel Ladle During Holding Period
In the current study, the transient flow and heat transfer in a steel ladle during the holding period are investigated by numerical simulation, in...
-
Experimental and Heat Transfer Analysis Using Nanofluid in Cylindrical Heat Pipe Heat Exchanger
In waste heat management systems for the utilization of heat, many new techniques are used currently, by taking into account an effective one is heat... -
Study of Flow and Heat Transfer in High Pressure Die Casting Cooling Channel
High-pressure die casting (HPDC) is a widely used process with short cycle times to manufacture complex shapes of aluminium castings for the...
-
Numerical Investigation of Laminar Forced Convection Heat Transfer Nanofluids Flow Using Different Base Fluids
In this paper, Numerical investigation of laminar forced convection heat transfer nanofluids flow through a horizontal circular pipe under a constant... -
Full-Process Numerical Simulation of Flow, Heat Transfer and Solidification for Hot Stam** Steel Manufactured via Thin Slab Continuous Casting Process
Thin slab casting and rolling (TSCR) is a near-net-shape manufacturing process and a key development technology in China's iron and steel industry....
-
A numerical comparison of circular and corrugation heat sink for laminar CuO–water nano-fluid flow and heat transfer enhancement
Since the high heat has a bad effect on every electric coolant device performance in small spaces, enhance thermal systems became a challenge to...
-
Simulation of heat-transfer conditions and development of a method for heating a sinter charge with water preheated using the heat of exhaust gases
To preheat water for moistening a sinter charge, it is proposed to use a recuperative water heater installed in the gas collector of a sinter machine...
-
Simulation of Fluid Flow, Heat Transfer and Particle Transport Inside Open-Cell Foam Filters for Metal Melt Filtration
In order to develop improved filters for metal melt filtration, different physical phenomena that take place during depth filtration of liquid metals... -
Numerical Simulations on Dynamic Behavior of Multiphase Flow and Heat Transfer in a Round Mold with a Swirling Flow Tundish Design
Three-dimensional computational fluid dynamics simulations were carried out to investigate the multiphase flow and heat transfer in a round mold,...
-
Numerical Simulation of Melt Flow, Heat Transfer and Solidification in CSP Continuous Casting Mold With Vertical-Combined Electromagnetic Braking
During continuous casting, electromagnetic braking (EMBr) is a widely used technology to improve the quality of steel product. The EMBr technology...
-
Study on the Calculation Method of Correlation Length of Power Spectral Density Function of Two-Phase Flow in Heat Transfer Tube of Steam Generator
In nuclear reactors, turbulent excitation is an essential mechanism of flow-induced vibration. Turbulence exists everywhere in the heat transfer...
-
Simulation and analysis of the heat transfer mechanism of arc plasma with CMT plus pulse composite heat source
An innovative numerical model was established to study the heat transfer mechanism with cold metal transfer plus pulse (CMT+P) composite heat source...
-
Reaction Mechanism in EAF Steelmaking Process Based on Selective Oxidation, Bath Stirring and Furnace Body Heat Transfer
EAF steelmakingEAF steelmaking is characterized by complex charge structureStructure, vigorous chemical reaction, and intensive energy source. The... -
Numerical Simulation of Melt Flow, Heat Transfer and Solidification in Final Solidification Zone of Bloom Continuous Casting with Vertical Linear Electromagnetic Stirring
In this study, a novel technique of Vertical Linear Electromagnetic Stirring (V-LEMS) was proposed and applied in the final solidification zone of...
-
3D CFD Model of Ladle Heat Transfer With Gas Injection
A fully transient 3D CFD model of an industrial argon bottom-stirred ladle with two eccentric porous plugs was developed. The computational domain...
-
Heat and Mass Transfer Characteristics of a Falling Film Absorber
A numerical analysis was conducted to explore the concurrent heat and mass transfer occurring in the descent of a liquid film during absorption... -
Effects of Pin–Fin Shape on Heat Transfer, Flow Behavior and Pressure Loss in a Swirl Tube
A numerical investigation has been carried out on effects of pin–fin shape on heat transfer, flow behavior and pressure loss characteristics in swirl...
-
ZnO nanostructures modulate the thermo-physical properties of Therminol 55 favorably for heat transfer applications
In this work, ZnO nanoparticles were used to improve the thermal performance of Therminol 55 oil. The addition of ZnO nanoparticles to Therminol 55...
-
Numerical simulation of multi-field coupling behavior and heat and mass transfer mechanism in laser additive manufacturing process
The serviceability of cladding layers manufactured by laser depends on the microstructure formed by the metallurgical solidification. The...