550 Result(s)
within
Yu** Zhou
English
Characterization and Evaluation of Materials
Industrial Chemistry/Chemical Engineering
Polymer Sciences
-
Article
Investigating the Effects of Contact Area and Chamfering on the Failure Behavior of Plain Woven Composite-Metal T-joints
This paper experimentally and numerically investigates the failure behavior of plain woven composite-metal connection structures (T-joints) under loads in different directions. According to the direction of lo...
-
Article
Modulating cross-linked network structure of epoxy resin blends towards concurrently high intrinsic thermal conductivity and dielectric properties
High thermal conductivity (k) epoxy resin (EP) composites are widely used in electronic devices and power equipment where timely heat dissipation is urgently desirable. However, achieving a balance between high-k...
-
Article
Retraction Note: Two co(II)-based coordination polymers: photocatalytic dye degradation properties and treatment effect against colon cancer by inhibiting IL-6-STAT3 inflammatory signaling pathway
-
Article
Competition of Composition Fluctuation Modes in Weakly Segregated Salt-doped Symmetric Diblock Copolymers
Salt-doped block copolymers have widespread applications in batteries, fuel cells, semiconductors, and various industries, where their properties crucially depend on phase separation behavior. Traditionally, i...
-
Article
Preparation and antibacterial properties of polypropylene composite with bisphenol A-type benzoxazine
Polypropylene (PP) is a commonly used material in medical supplies. However, its lack of antibacterial properties has led to a frequent occurrence of healthcare-associated infections that need to be addressed....
-
Article
Research on the Influence of Yarn Reduction on the Bending Performance of Three-dimensional Woven Composites
The primary objective of this study is to conduct a comprehensive experimental investigation into the impact of yarn reduction on the damage mechanisms and progression of 3D woven composites under bending load...
-
Article
Exploring Flexural Performances of Fused Filament Fabrication 3D-Printed ABS and ABS-Composites through Innovative Bio-Inspired Processing Parameter Optimization
Taking crustacean organisms in nature as prototypes helps improve the design of protective gears. Drawing inspiration from the high-damage-tolerance helical-structured cuticle of the American crayfish, we cond...
-
Article
Injection of a Self-propelled Polymer into a Small Circular Cavity
The injection of a polymer chain into a small circular cavity under tangential self-propelled force is studied by using Langevin dynamics simulation. Results indicate that the injection dynamics of the active ...
-
Article
Investigation on UV-curing Reprocessable Thermosets Bearing Hindered Urea Bonds and Their Composites with Modified Zinc Oxide Nanoparticles
In this study, a series of hindered urea bond (HUB) containing polyurethane-urea methacrylate prepolymers and a none HUB containing polyurethane methacrylate prepolymer were prepared using isobornyl methacryla...
-
Article
Damage Recognition of Acoustic Emission and Micro-CT Characterization of Bi-adhesive Repaired Composites Based on the Machine Learning Method
Bi-adhesive repair method is one of several repair technologies that use the adhesive bonding approach for patch-repaired composites. However, these repairs are subject to matrix-cracking and interface debondi...
-
Article
Surface-induced Microstructure and Performance Changes in P3HT Ultrathin Films
In this work, poly(3-hexylthiophene) (P3HT) ultrathin films (P3HT-T) were prepared by spin-coating a dilute P3HT solution (in a toluene: o-dichlorobenzene (Tol:ODCB) blend with a volume ratio of 80:20) with ultra...
-
Article
The Crystallization Behavior of L-Poly(lactic acid)/Polypropylene Blends: The Acceleration for Both L-Poly(lactic acid) and Polypropylene
For a polymer/polymer dismissible blend with two crystallizable components, the crystallization behavior of different components and the reciprocal influences between different crystals are interesting and imp...
-
Article
Lightweight, Strong and High Heat-Resistant Poly(lactide acid) Foams via Microcellular Injection Molding with Self-Assembly Nucleating Agent
Poly(lactide acid) (PLA) foams have shown considerable promise as eco-friendly alternatives to nondegradable plastic foams, such as polystyrene (PS) foams. Nevertheless, PLA foam typically suffers from low hea...
-
Article
Recent Advances in Asymmetric Structural Composites for Excellent Electromagnetic Interference Shielding: A Review
Since electromagnetic pollution is detrimental to human health and the environment, numerous efforts have been successively made to achieve excellent electromagnetic interference shielding effectiveness (EMI SE)
-
Article
Side-Chain-Type Polyimide-Cu Complexes with Suppressed Activation Energy of Relaxation for Advanced High-Temperature Capacitor
The burgeoning growth of the new energy vehicles and aviation industry has escalated the need for energy storage capacitors capable of stable operation in harsh environments. The advent of metal-polyimide comp...
-
Article
Ordered Bicontinuous Network Structures Regulated by Orientational Interactions in a Rod-Coil Block Copolymer
The rich phase behavior of block copolymers (BCPs) has drawn great attention in recent years. However, the double diamond (DD) phase is rarely obtained because of the competition between the minimization of in...
-
Article
High-Performance α-Diimine Nickel Complexes for Facile Access of PE Elastomers with Exceptional Material Properties
For practicable elastomeric polyethylene, achieving high catalyst thermal stability and activity, along with precise control of polymer properties such as branching density, molecular weights, and distribution...
-
Article
Enhanced Crystallization of Poly(butylene adipate-co-terephthalate) by a Self-assembly Nucleating Agent
Poly(butylene adipate-co-terephthalate) (PBAT) is a promising biodegradable flexible polymer but suffers from slow crystallization rate, making it less attractive for some applications like the injection-molded p...
-
Article
A carbon nanotube/graphene nanoplatelet pressure sensor prepared by combining 3D printing and freeze-drying method
With the development of wearable electronic devices, flexible sensors have received widespread attention, especially for high sensitivity sensors. However, sensors prepared by conventional processes such as ho...
-
Article
Holographic Polymer Nanocomposites with High Refractive Index Modulation by Do** Liquid Crystal E6M
Holographic optical elements (HOEs) based on polymer composites have become a research hot spot in recent years for augmented reality (AR) due to the significant improvement of optical performance, dynamic ran...
