Skip to main content

and
  1. Article

    Open Access

    Tribological properties of low-temperature time-dependent pretreated graphite for mechanical seal pairs in high-speed turbopump

    The friction coefficient and wear rate of pretreated graphite with liquid nitrogen were obtained by using a ball-on-disk tester, and the wear of GCr15–graphite seal pairs with the low-temperature time-dependen...

    Yangyang Zhao, Guoyuan Zhang, Junqian Wang, He Wang, Weigang Zhao, Qunfeng Zeng in Friction (2024)

  2. No Access

    Article

    A Comparative Study on the Anti-Friction Performance of Amorphous Silicon Films Enhanced by WS2 Nanoflakes

    Silicon has been irreplaceable for a long time due to its well-estiblished design and fabrication in the field of Micro-Electro-Mechanical System (MEMS). However, it has poor tribological properties, which lim...

    Qunfeng Zeng, Zekun Ning, Jianing Zhu, Zhao Wang, Zeming Pang in Silicon (2023)

  3. No Access

    Article

    Application of Taguchi Method Design to Investigate Tribological Performance of Laser-Surface-Textured 316L Austenitic Stainless Steel

    In this work, 316L austenitic stainless steel (ASS) was subjected to laser surface texturing to improve its tribological performance. The effects of surface texture parameters and service conditions on the tri...

    Huanhuan Wang, Shuo Yuan, Naiming Lin in Journal of Materials Engineering and Perfo… (2023)

  4. No Access

    Article

    Characterization of microstructure, grain distribution, and tribocorrosion properties of NiTi-based alloy

    Hardened 58Ni39Ti3Hf possesses a superior resistance to quenching cracking and spall-type surface fatigue as compared to 60NiTi, which makes it considered as an alternative for this binary intermetallic. Nonet...

    Chao Yan, Qunfeng Zeng, Khashayar Khanlari, ****g Zhu in Journal of Materials Science (2022)

  5. No Access

    Article

    A Method for Measuring Interlayer Vacuum Degree of the Liquified Natural Gas Vacuum Multi-layer Insulation Pipe by Temperatures

    It is difficult to obtain the interlayer vacuum degree of the LNG (liquified natural gas) vacuum multi-layer insulation pipe at any position, especially for pipes that are in service. Thus, this paper proposes...

    Qunfeng Zeng, Hao Jiang, Qi Liu, Gaokai Li in Instruments and Experimental Techniques (2022)

  6. Article

    Open Access

    Enhanced micro/nano-tribological performance in partially crystallized 60NiTi film

    The microstructure, mechanical and micro/nano-tribological properties of the 60NiTi film annealed at different temperature were investigated. The results reveal that annealing as-deposited 60NiTi film at 300, ...

    Wanjun He, Qunfeng Zeng in Friction (2021)

  7. No Access

    Article

    Experimental and numerical investigation into the corrosion performance of X100 pipeline steel under a different flow rate in CO2-saturated produced water

    The effect of flow velocity on the corrosion behavior of X100 steel in CO2-saturated produced water (CO2-SPW) was studied. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) were ...

    Shengnan Wang, Jie Zhao, Yanhong Gu, Dan **ong in Journal of Solid State Electrochemistry (2021)

  8. No Access

    Article

    Tailoring Tribological Performance of Pure Titanium by a Duplex Treatment of Laser Surface Texturing-Thermal Oxidation

    A combined surface treatment of laser surface texturing (LST)-thermal oxidation (TO) technique was performed on pure titanium (TA2) matrix to enhance its wear resistance. The dimple-shaped texture was fabricat...

    Ruyi Liu, Shuo Yuan, Naiming Lin in Journal of Materials Engineering and Perfo… (2020)

  9. No Access

    Article

    Nano-crystallization-Driven High Temperature Self-lubricating Properties of Magnetron-Sputtered WS2 Coatings

    In consideration of high temperature conditions, this paper focuses on the self-lubricating properties of WS2 coatings at high temperature. A low coefficient of friction (CoF) about 0.07–0.2 for WS2 coatings can ...

    Jianing Zhu, Qunfeng Zeng, Yongfu Wang, Chao Yan, Wanjun He in Tribology Letters (2020)

  10. No Access

    Article

    Ag-do** behavior on (8, 0) single-walled carbon nanotube with single C-vacancy or pyridine-like N3 defect: a DFT study

    Single C-vacancy and pyridine-like N3 defect are usually formed on the single-walled carbon nanotube (SWCNT) and they have unique properties for potential applications. In this paper, we use density functional th...

    Chao Yan, Qunfeng Zeng, Jianing Zhu in Carbon Letters (2019)

  11. No Access

    Article

    Low-friction behaviors of Ag-doped γ-Fe2O3@SiO2 nanocomposite coatings under a wide range of temperature conditions

    In this paper, Ag-doped γ-Fe2O3@SiO2 nanocomposite coatings have been prepared by sol–gel method and deposited on steel substrate. The microstructure, surface topography, and high-temperature tribological propert...

    Qunfeng Zeng, Shuangli Cai in Journal of Sol-Gel Science and Technology (2019)

  12. No Access

    Article

    Influence of Zr–S co-do** on the electronic structure and optical properties of anatase TiO2: first-principles GGA + U method

    Titanium dioxide has received much attraction in the field of photocatalysts applied for hydrogen production from the water splitting due to its unique set of desirable properties of non-toxicity, chemical and...

    Chao Yan, Qunfeng Zeng, Jianing Zhu, Qian Cao in Applied Physics A (2019)

  13. No Access

    Article

    High-temperature low-friction behaviors of γ-Fe2O3@SiO2 nanocomposite coatings obtained through sol–gel method

    In the present paper, the γ-Fe2O3@SiO2 nanocomposite is prepared by sol–gel method and the γ-Fe2O3@SiO2 nanocomposite coatings are deposited on the steel substrate. The microstructure, surface topography, and tri...

    Qunfeng Zeng, Shuangli Cai, Shuangjiang Li in Journal of Sol-Gel Science and Technology (2018)

  14. No Access

    Article

    Microstructure, Chemical Composition and Local Corrosion Behavior of a Friction Stud Welding Joint

    In this paper, friction stud welding technology was used to join a stud and base metal, which were composed of X65 steel. The scanning vibrating electrode technique (SVET) and localized electrochemical impedan...

    Huijuan Ma, Yanhong Gu, Hui Gao in Journal of Materials Engineering and Perfo… (2018)

  15. Article

    Open Access

    Green superlubricity of Nitinol 60 alloy against steel in presence of castor oil

    In the present work, first, we show that sliding Nitinol 60 alloy against steel under castor oil lubrication exhibits a new case of superlubricity (coefficient of friction CoF ≪ 0.01). So far, CoF below 0.01 h...

    Qunfeng Zeng, Guangneng Dong, Jean Michel Martin in Scientific Reports (2016)

  16. No Access

    Article

    Understanding the Physical Adsorption Action Mechanism of MoS2 Nanoparticles in Boundary Lubrication with Different Polyisobutyleneamine Succinimide (PIBS) Concentrations

    The lubrication mechanism of nanoinorganic particles during friction process has been widely investigated. However, the physical adsorption action mechanism between the nanoparticles (after modification) and f...

    Hongxing Wu, Liguo Qin, Qunfeng Zeng, Guangneng Dong in Tribology Letters (2015)

  17. No Access

    Article

    Response of MC3T3-E1 osteoblast cells to the microenvironment produced on Co–Cr–Mo alloy using laser surface texturing

    Osteoblast responses to Co–Cr–Mo alloy depend on not only the chemistry of alloy but also the physical properties of alloy surface, such as its microtopography and roughness. This study was undertaken to exami...

    Liguo Qin, Qunfeng Zeng, Wenxing Wang, Yali Zhang in Journal of Materials Science (2014)

  18. No Access

    Article

    Influence of Load and Sliding Speed on Super-Low Friction of Nitinol 60 Alloy under Castor Oil Lubrication

    In the present paper, the influence of load and sliding speed on super-low friction of Nitinol 60 alloy was investigated experimentally using Nitinol 60 alloy pin sliding over GCr15 steel disk under castor oil...

    Qunfeng Zeng, Guangneng Dong in Tribology Letters (2013)