-
Article
Effect of Hydrogen on Microstructure, Mechanical Properties, and Fracture Behavior of 35NCD16 Fastener Steels
This work presents the experimental investigation of the impact of hydrogen on the microstructural and mechanical characteristics of fastener steels using the electrochemical hydrogen charging technique. The a...
-
Article
Sentiment Analysis and Topic Modeling on Polycystic Ovary Syndrome from Online Forum Using Deep Learning Approach
Twitter and other internet sites offer an easy way for people apprehensive about communicating and exchanging information regarding health issues. These discussion boards are sources of information about peopl...
-
Article
Effect of Uniaxial Pre-strain on Room Temperature Tensile and Creep Behavior of Aluminum Alloy AA2219-T87 for Propellant Tanks of Satellite Launch Vehicles
In this study, the effect of uniaxial pre-strain in the range of 1-9%, has been studied on room temperature tensile and creep behavior of aluminum alloy AA2219-T87. Tensile properties of pre-strained specimens...
-
Article
Effect of Uniaxial Pre-strain on Tensile, Work Hardening, Fracture Toughness, and Fatigue Crack Growth Rate of Titanium Alloy Ti–6Al–4V
In this study, the effect of plastic deformation on strength, work hardening behavior, fracture toughness (FT, JIc), and fatigue crack growth rate (FCGR) of Ti–6Al–4V alloy in annealed condition was studied. Ti–6...
-
Article
Biaxial Tensile Behavior of Aluminum Alloy AA2219-T852 using Tension and Internal Pressure
Aluminum alloy AA2219-T852 tubular specimens were subjected to biaxial testing. The specimens were tested under tensile as well as internal pressure simultaneously to create biaxial loading conditions with str...
-
Article
Thermochemical Properties Over LiCl-KCl-UCl3 Ternary Salt System: Knudsen Effusion Mass Spectrometric Study
Vaporisation studies were carried out over the solid region of LiCl(cr), KCl(cr) and liquid region of LiCl-KCl-UCl3 ternary salt system by using Knudsen Effusion Mass Spectrometry (KEMS) in the temperature range ...
-
Article
Open AccessAn integrative machine learning framework for classifying SEER breast cancer
Breast cancer is the commonest type of cancer in women worldwide and the leading cause of mortality for females. The aim of this research is to classify the alive and death status of breast cancer patients usi...
-
Chapter and Conference Paper
Experimental Investigations on Turbine-Generator Shaft Under Subsynchronous Resonance
Energy exchange takes place between turbine and generator in the power system during subsynchronous resonance (SSR) which leads to torsional interaction between the shafts. Resonance in the power system is cau...
-
Chapter and Conference Paper
Cloud Based “Energy Aware” Routing Protocol for Predetection and Its Prevention of Fault Tolerance
In the Modern computer era Energy consumption major issues in all the network. Several researchers have developed numerous methods to avoid the fault tolerance. However so far researchers have not found the ab...
-
Article
Temperature Influence on Dielectric Tunnel FET Characterization and Subthreshold Characterization
VLSI technology is being developed to lower the size of semiconductor devices due to the increasing importance of integrated circuits (ICs). Short channel effects, for example, make it difficult to operate the...
-
Article
Influence of Waste Glass Powder as an Aluminosilicate Precursor in Synthesizing Ternary Blended Alkali-Activated Binder
The formation of alkali-activated binders from industrial end products and landfill materials attracts considerable interest in construction technology since it diminishes the waste products discarded into lan...
-
Article
On the anisotropy in room-temperature mechanical properties of laser powder bed fusion processed Ti6Al4V-ELI alloy for aerospace applications
Extra low interstitial (ELI) grade of titanium alloy Ti6Al4V is used for the fabrication of components operating at cryogenic temperatures in satellite launch vehicles, given its excellent combination of stren...
-
Chapter
Inducing Insect Resistance in Sesame by Innovative Genetic Manipulation Using Mutagens
Inducing insect resistance in the host plant is one of the important components of host plant resistance. Resistance can be induced artificially in the plant system by application of external elicitors such as...
-
Article
Characterization of Titanium Alloy Ti6Al4V-ELI Components made by Laser Powder Bed Fusion Route for Space Applications
Extra-low interstitial (ELI) grade of Titanium Alloy Ti6Al4V is used for the structural applications in cryogenic stages of launch vehicles due to its high strength-to-weight ratio and ability to maintain duct...
-
Article
A Critical Review of Waste Glass Powder as an Aluminosilicate Source Material for Sustainable Geopolymer Concrete Production
Incorporation of the waste glass powder (WGP) as an aluminosilicate precursor material in the geopolymer concrete preparation has been researched for the past twenty years as an alternative to the sustainable ...
-
Article
Tensile and Fracture Properties of Aluminium Alloy AA2219-T87 Friction Stir Weld Joints for Aerospace Applications
The purpose of the present work is to study the mechanical behaviour of AA2219-T87 friction stir weld (FSW) joints at different temperatures (Room temperature (RT), 77 K and 20 K) and correlate them to the mic...
-
Chapter and Conference Paper
Rotor Dynamics of Turbine–Generator Shaft with Dampers During Subsynchronous Resonance Generated by Series Capacitors
Purpose In this paper, an electromechanical approach to study the turbine–generator shaft stability with and without dampers is made. The shaft is subjected to electrical disturbances created by series capacitors...
-
Chapter and Conference Paper
Fabrication of Didactic Model to Demonstrate Bottle Filling System Using Programmable Logic Controller
Automation is the evolution of manufacturing process which will ideally lead to e-governance. It helps humans and machines to be connected at the hip, blending the cerebral aptitudes of human and specialized a...
-
Chapter and Conference Paper
Data Routing with Load Balancing Using Ant Colony Optimization Algorithm
Wireless Sensor Networks (WSNs) are growing field in recent days. For maximizing life time of network, the routing is very important part to be considered. The routing becomes more complex due to number of nod...
-
Article
Kinetics of Cr2N Precipitation and Its Effect on Pitting Corrosion of Nickel-Free High-Nitrogen Austenitic Stainless Steel
In the present work, hot-rolled nickel-free high-nitrogen austenitic stainless steels (HNSS) were solution annealed and aged at 700, 800 and 900 °C for 14 h. Precipitation behavior of Cr2N at the grain boundaries...