-
Article
Correction to: Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells
-
Article
Effect of Low Plasma Spraying Power on Anode Microstructure and Performance for Metal-Supported Solid Oxide Fuel Cells
Metal-supported solid oxide fuel cells have broad application prospects in distributed power generation, transportation, military, and other fields. The electrochemical performance of the cell is still a chall...
-
Article
Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells
For metal-supported solid oxide fuel cells, gadolinium-doped cerium ceria (GDC) is one of the most promising electrolyte materials due to its high ionic conductivity at medium and low temperatures. However, us...
-
Article
A Three-Dimensional Damaged Region Contour Extraction Approach for Cold Spray Repair
With multiple merits compared with thermal spray, cold spray technology is widely applied for various application fields. As part of an intelligent cold spray repair system, an approach for three-dimensional (...
-
Article
Highly Sensitive LaFeO3 Coatings Deposited by Solution Precursor Plasma Spraying for Isoamyl Alcohol Detection
The development of one-step deposition technology for metal oxide-based coatings is significant for the rapid fabrication of gas sensors. Gas sensors based on LaFeO3 were fabricated by solution precursor plasma s...
-
Article
Spray Trajectory Planning for Complex Structural Components in Robotized Cold Spray Additive Manufacturing
In the cold spray additive manufacturing (CSAM) process, layer-by-layer stacking is an efficient method to achieve materials additive manufacturing (AM). Unlike other AM processes, such as selective laser clad...
-
Article
Evolution of Microstructures and Mechanical Properties of Cold Sprayed Copper in Hot Rolling
Hot rolling is an emerging post-processing method for improving mechanical properties of cold sprayed materials. However, the effects of hot rolling on cold sprayed materials are not well clarified. Accordingl...
-
Article
Suspension Plasma Sprayed ZnO Coatings for CO2 Gas Detection
Hollow spherical ZnO, prepared by hydrothermal synthesis method with a soft template, was dispersed in deionized water to form a uniform suspension. The micromorphology, phase composition and UV absorbance of ...
-
Chapter and Conference Paper
Toolpath Planning for Cold Spray Additive Manufacturing
Cold spray (CS) has recently become one of the popular additive manufacturing (AM) processes, which allows forming large volume objects fast without the risk of undesirable heat effects. However, this unique t...
-
Article
Application of Image Segmentation to Identify In-flight Particles in Thermal Spraying
In thermal spray process, the characteristics of in-flight particles (velocity and temperature) play an important role regarding the microstructure of the deposit and thus the coating performances. The impleme...
-
Article
Description and Prediction of Multi-layer Profile in Cold Spray Using Artificial Neural Networks
Cold spray is a newly developed solid-state metal deposition technology, which allows for preparing various functional coatings and repairing damaged metal components, as well as fabricating freestanding parts...
-
Article
New Process Implementation to Enhance Cold Spray-Based Additive Manufacturing
Cold spraying (CS) is a solid-state coating technique that has been applied as a novel additive manufacturing (AM) method to fabricate freestanding metal components. Recent advances in cold spray additive manu...
-
Article
Implementation of Artificial Neural Networks for Forecasting the HVOF Spray Process and HVOF Sprayed Coatings
In the high velocity oxygen fuel (HVOF) spray process, coating properties are sensitive to the characteristics of in-flight particles, which are mainly determined by process parameters. Obtaining a comprehensi...
-
Article
Effect of Static Magnetic Field on the Evolution of Residual Stress and Microstructure of Laser Remelted Inconel 718 Superalloy
As a typical additive manufacturing technique, direct energy deposition is restricted from further application due to the presence of residual stress and the structural deformation. Thus, minimizing the residu...
-
Article
Parametric Analysis and Modeling for the Porosity Prediction in Suspension Plasma-Sprayed Coatings
The porous architecture of suspension plasma-sprayed coatings has a significant influence on the coating performances and thus should be properly designed for the intended applications. In this study, YSZ coat...
-
Article
Correction to: Effect of Dry-Ice Blasting on Structure and Magnetic Properties of Plasma-Sprayed Fe-40Al Coating from Nanostructured Powders
The authors erroneously omitted.
-
Article
Correction to: Strengthened Peening Effect on Metallurgical Bonding Formation in Cold Spray Additive Manufacturing
Three authors were not listed on the original article: Riga-Nirina Raoelison, Philippe Herve, and Jiang Wang. Please note the correct author and affiliations of the article should read.
-
Article
Strengthened Peening Effect on Metallurgical Bonding Formation in Cold Spray Additive Manufacturing
Cold spraying is a solid-state coating process and promising technique for additive manufacturing. However, questions raise about the bonding mechanism between the particles forming the coating. In this study,...
-
Article
Characterizations of Composite Titanium Nitride Coatings Deposited by Very Low-Pressure Plasma Spraying
In this study, composite titanium nitride coating deposition by reactive spraying was carried under a controlled low-pressure (150 pa) atmosphere with a F4-VB low-power plasma gun. Pure titanium powder is inje...
-
Article
VLPPS: An Emerging Process to Create Well-Defined Components by Additive Manufacturing
Plasma spraying in controlled atmosphere as very-low-pressure plasma spraying (VLPPS) allows to work with different states of matter, particularly vapor. As a result, the coating microstructure is unique (lowe...