-
Article
Correction to: Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells
-
Article
Effect of Low Plasma Spraying Power on Anode Microstructure and Performance for Metal-Supported Solid Oxide Fuel Cells
Metal-supported solid oxide fuel cells have broad application prospects in distributed power generation, transportation, military, and other fields. The electrochemical performance of the cell is still a chall...
-
Article
Additive manufacturing of Al thick wall using high-pressure cold spraying: issues of porosity and mechanical properties
This paper investigates the cold spray additive manufacturing of a thick wall made of pure Al powder with a granulometry of + 45–15 μm with a size d50 = 26.95 µm. A high wall with vertical lateral faces is obt...
-
Article
Preparation of Plasma Sprayed GDC Electrolytes for Metal-Supported Solid Oxide Fuel Cells
For metal-supported solid oxide fuel cells, gadolinium-doped cerium ceria (GDC) is one of the most promising electrolyte materials due to its high ionic conductivity at medium and low temperatures. However, us...
-
Article
A Three-Dimensional Damaged Region Contour Extraction Approach for Cold Spray Repair
With multiple merits compared with thermal spray, cold spray technology is widely applied for various application fields. As part of an intelligent cold spray repair system, an approach for three-dimensional (...
-
Article
Highly Sensitive LaFeO3 Coatings Deposited by Solution Precursor Plasma Spraying for Isoamyl Alcohol Detection
The development of one-step deposition technology for metal oxide-based coatings is significant for the rapid fabrication of gas sensors. Gas sensors based on LaFeO3 were fabricated by solution precursor plasma s...
-
Article
Open AccessDevelopment of photocatalytic and electrocatalytic coatings via thermal spraying for environmental and energy storage applications: a short review
With the development of society, human beings are facing environmental problems and an energy crisis worldwide. In this context, photocatalysis and electrocatalysis represent promising technologies to help sol...
-
Article
Spray Trajectory Planning for Complex Structural Components in Robotized Cold Spray Additive Manufacturing
In the cold spray additive manufacturing (CSAM) process, layer-by-layer stacking is an efficient method to achieve materials additive manufacturing (AM). Unlike other AM processes, such as selective laser clad...
-
Article
Evolution of Microstructures and Mechanical Properties of Cold Sprayed Copper in Hot Rolling
Hot rolling is an emerging post-processing method for improving mechanical properties of cold sprayed materials. However, the effects of hot rolling on cold sprayed materials are not well clarified. Accordingl...
-
Article
Open AccessOpen source board based acoustofluidic transwells for reversible disruption of the blood–brain barrier for therapeutic delivery
Blood–brain barrier (BBB) is a crucial but dynamic structure that functions as a gatekeeper for the central nervous system (CNS). Managing sufficient substances across the BBB is a major challenge, especially ...
-
Article
Suspension Plasma Sprayed ZnO Coatings for CO2 Gas Detection
Hollow spherical ZnO, prepared by hydrothermal synthesis method with a soft template, was dispersed in deionized water to form a uniform suspension. The micromorphology, phase composition and UV absorbance of ...
-
Article
Finished surface morphology, microstructure and magnetic properties of selective laser melted Fe-50wt% Ni permalloy
This work focuses on the structure and magnetic properties of Fe-50wt% Ni permalloy manufactured from the pre-alloyed powder by selective laser melting (SLM). The selective laser melted (SLMed) alloys were cha...
-
Article
A framework for a knowledge based cold spray repairing system
Restoring damaged components is a very promising and high-value project, which enable to save a lot of production time and cost, and thus has already attracted wide attention, especially in the aviation indust...
-
Article
Correction to: Effect of Laser Energy Density on Surface Morphology, Microstructure, and Magnetic Properties of Selective Laser Melted Fe-3wt.% Si Alloys
-
Chapter and Conference Paper
Toolpath Planning for Cold Spray Additive Manufacturing
Cold spray (CS) has recently become one of the popular additive manufacturing (AM) processes, which allows forming large volume objects fast without the risk of undesirable heat effects. However, this unique t...
-
Article
Application of Image Segmentation to Identify In-flight Particles in Thermal Spraying
In thermal spray process, the characteristics of in-flight particles (velocity and temperature) play an important role regarding the microstructure of the deposit and thus the coating performances. The impleme...
-
Article
Open AccessThe wound severity of animal bite victims visiting rabies prevention clinics and the influencing factors in Central China: a cross-sectional investigation
Animal bites are a major public health problem. The more serious the bite wound is, the higher the risk of develo** rabies is. This study aimed to investigate the severity of wounds among animal bite victims...
-
Article
Description and Prediction of Multi-layer Profile in Cold Spray Using Artificial Neural Networks
Cold spray is a newly developed solid-state metal deposition technology, which allows for preparing various functional coatings and repairing damaged metal components, as well as fabricating freestanding parts...
-
Article
Effect of Laser Energy Density on Surface Morphology, Microstructure, and Magnetic Properties of Selective Laser Melted Fe-3wt.% Si Alloys
To study the effect of the laser energy density (LED) on surface morphology, microstructural evolution, and magnetic properties of Fe-3wt.% Si alloy, the alloy was manufactured via selective laser melting (SLM...
-
Article
New Process Implementation to Enhance Cold Spray-Based Additive Manufacturing
Cold spraying (CS) is a solid-state coating technique that has been applied as a novel additive manufacturing (AM) method to fabricate freestanding metal components. Recent advances in cold spray additive manu...
