Skip to main content

45 Result(s)

within C.-L. Wu Remove this filter

previous disabled Page of 3
and

  1. No Access

    Article

    Study on Microstructure and Fatigue Properties of A473M Stainless Steel Strengthened by Surface Rolling

    The surface of A473M martensitic stainless steel shaft sleeve was treated with rolling technology. This paper studies the change of microstructure and the influence on surface properties caused by feed paramet...

    G. X. Zhou, C. H. Zhang, L. Wang, C. L. Wu… in Journal of Materials Engineering and Perfo… (2024)

  2. No Access

    Article

    Modulating Surface Machining to Optimize Work Hardening and Corrosion Behavior in 304 Austenitic Stainless Steel

    Surface machining including cutting, rolling and grinding was employed to machine 304 austenitic stainless steels, aiming at obtaining high hardening layer and corrosion resistance. The rolling sample exhibite...

    C. L. Wu, T. Zhao, S. Zhang, Z. Y. Wang… in Journal of Materials Engineering and Perfo… (2023)

  3. No Access

    Article

    Comparative Study on the Microstructure, Wear Behavior, and Corrosion Performance of Iron-Based and Cobalt-Based Coatings Fabricated by Laser Cladding

    In this paper, two kinds of coatings (iron-based and cobalt-based) were successfully prepared on the surface of AISI 304 stainless steel using laser cladding technology as substitute materials with excellent w...

    F. **, S. Zhang, C. L. Wu, C. H. Zhang… in Journal of Materials Engineering and Perfo… (2023)

  4. No Access

    Article

    Microstructural Evolution and Properties of Novel Ferritic Stainless Steel–Mox Prepared by Laser Melting Deposition

    An investigation was designed to research the effect of molybdenum (Mo) content on the microstructure and properties of novel ferritic stainless steel (FSS) fabricated by laser melting deposition (LMD). In thi...

    H. F. Zhang, S. Zhang, C. L. Wu, C. H. Zhang… in Journal of Thermal Spray Technology (2023)

  5. No Access

    Article

    Laser Cladding of 17-4 PH Stainless Steel Coatings: Microstructure, Texture Characterization, and Corrosion Resistance

    As an advanced material surface modification technology, laser cladding technology has been widely used in the preparation of high-performance coatings and the repair and remanufacturing of failed parts. In th...

    M. H. Nie, S. Zhang, Z. Y. Wang, T. Y. Yin… in Journal of Materials Engineering and Perfo… (2023)

  6. No Access

    Article

    UV Photoinitiated Temperature-Sensitive Modification of Polypropylene Grafted with Poly(N-isopropylacrylamide)

    Poly(N-isopropylacrylamide) was grafted onto the surface of polypropylene by a two-step surface photo-grafting method using benzophenone as a photosensitizer to impart surface temperature sensitivity to polypropy...

    X. C. Zheng, C. L. Wu, J. **ong, H. Lei in Polymer Science, Series B (2022)

  7. No Access

    Article

    Relationship between Coffee Consumption and Osteoporosis Risk Determined by the ESR1 Polymorphism rs2982573

    The development of osteoporosis is partly explained by interactions between genetic and lifestyle or environmental factors.

    C.-L. Wu, O. N. Nfor, W.-Y. Lu, D. Manli Tantoh… in The journal of nutrition, health & aging (2022)

  8. No Access

    Article

    Anisotropic Inter-granular Corrosion Behaviors and Microstructures of AlMgSiCu Alloy Sheets Made by Thermal–Mechanical Treatments

    This study investigates the microstructure and local corrosion behavior of an Al–Mg–Si–Cu alloy, which has been subjected to cold-rolling with different deformation strain ratios (DSRs) and followed by artific...

    L. M. Liu, Y. X. Lai, C. L. Wu, Z. Zhang… in Acta Metallurgica Sinica (English Letters) (2022)

  9. No Access

    Article

    Microstructure and Properties of CeO2-Modified FeCoCrAlNiTi High-Entropy Alloy Coatings by Laser Surface Alloying

    The FeCoCrAlNiTi high-entropy alloy (HEA) coatings modified by CeO2 were synthesized on 304 stainless steel substrate with Co-Cr-Al-Ni-Ti-xCeO2 powders by laser high-entropy alloying. The phase composition, micro...

    P. F. Jiang, C. H. Zhang, C. L. Wu, S. Zhang… in Journal of Materials Engineering and Perfo… (2020)

  10. No Access

    Article

    Effects of Additives on Electrochemical Growth of Cu Film on Co/SiO2/Si Substrate by Alternating Underpotential Deposition of Pb and Surface-Limited Redox Replacement by Cu

    The effects of additives to an acidic electrolyte for electrochemical deposition of copper film to prevent corrosion of the Co/SiO2/Si substrate have been investigated. A sacrificial Pb layer was formed by underp...

    J. S. Fang, L. Y. Lin, C. L. Wu, Y. L. Cheng, G. S. Chen in Journal of Electronic Materials (2017)

  11. No Access

    Article

    Serum Cyr61 as a potential biomarker for diagnosis of colorectal cancer

    To determine the sensitivity and specificity of serum Cyr61 as a potential biomarker for the diagnosis of colorectal cancer (CRC) and to assess the association between serum Cyr61 level and CRC clinicopatholog...

    Y. F. Song, Z. B. Xu, X. J. Zhu, X. Tao, J. L. Liu… in Clinical and Translational Oncology (2017)

  12. No Access

    Chapter and Conference Paper

    Controlling the Flow Structure in Fluidized Bed: A CFD-DEM Approach

    The spontaneous production of meso-scale flow features such as bubbles and slugs during gas-solid fluidization is well known. This has direct impact on chemical engineering design issues such as conversion rat...

    D. G. de Oliveira, O. O. Ayeni, C. L. Wu… in Proceedings of the 7th International Confe… (2017)

  13. No Access

    Article

    Isothermal Crystallization Kinetics Effect on the Tensile Properties of PLA/PTT Polymer Composites

    A poly(lactic acid)/poly(trimethylene terephthalate) (PLA/PTT) composite was prepared by melt blending to improve the PTT crystallization rate. Morphology analysis of PLA/PTT fractured surfaces demonstrated th...

    C.-Y. Tsou, C.-L. Wu, Y.-C. Tseng, S.-H. Chiu, M.-C. Suen… in Strength of Materials (2017)

  14. No Access

    Article

    Hyperactivated FRS2α-mediated signaling in prostate cancer cells promotes tumor angiogenesis and predicts poor clinical outcome of patients

    Metastasis of tumors requires angiogenesis, which is comprised of multiple biological processes that are regulated by angiogenic factors. The fibroblast growth factor (FGF) is a potent angiogenic factor and ab...

    J Liu, P You, G Chen, X Fu, X Zeng, C Wang, Y Huang, L An, X Wan, N Navone… in Oncogene (2016)

  15. Article

    Potent antitumor activity of Oct4 and hypoxia dual-regulated oncolytic adenovirus against bladder cancer

    Most solid tumors undergo hypoxia, leading to rapid cell division, metastasis and expansion of a cell population with hallmarks of cancer stem cells (CSCs). Tumor-selective replication of oncolytic adenoviruse...

    C-S Lu, J-L Hsieh, C-Y Lin, H-W Tsai, B-H Su, G-S Shieh, Y-C Su, C-H Lee… in Gene Therapy (2015)

    Download PDF (3959 KB) View Article

  16. No Access

    Article

    Annealing Effect on the Microstructure and Mechanical Properties of a Thin Titanium Nitride Film

    Titanium nitride (TiN) films were deposited by the D.C. magnetron sputtering process on a SUS 304 steel substrate. The effect of postdeposition annealing on the microstructure and mechanical properties of thin...

    S. C. Her, C. L. Wu in Strength of Materials (2014)

  17. No Access

    Article

    Diet-induced obesity alters the differentiation potential of stem cells isolated from bone marrow, adipose tissue and infrapatellar fat pad: the effects of free fatty acids

    Obesity is a major risk factor for several musculoskeletal conditions that are characterized by an imbalance of tissue remodeling. Adult stem cells are closely associated with the remodeling and potential repa...

    C-L Wu, B O Diekman, D Jain, F Guilak in International Journal of Obesity (2013)

  18. No Access

    Article

    Role of AMPK in UVB-induced DNA damage repair and growth control

    Skin cancer is the most common cancer in the United States, while DNA-damaging ultraviolet B (UVB) radiation from the sun remains the major environmental risk factor. Reducing skin cancer incidence is becoming...

    C L Wu, L Qiang, W Han, M Ming, B Viollet, Y Y He in Oncogene (2013)

  19. Article

    Combination of vinblastine and oncolytic herpes simplex virus vector expressing IL-12 therapy increases antitumor and antiangiogenic effects in prostate cancer models

    Oncolytic herpes simplex virus (oHSV)-1-based vectors selectively replicate in tumor cells causing direct killing, that is, oncolysis, while sparing normal cells. The oHSVs are promising anticancer agents, but...

    B J Passer, T Cheema, S Wu, C-l Wu, S D Rabkin, R L Martuza in Cancer Gene Therapy (2013)

    Download PDF (1456 KB) View Article

  20. No Access

    Article

    Assessing prostate cancer growth with citrate measured by intact tissue proton magnetic resonance spectroscopy

    Annual PSA tests have led to a significant increase in the number of prostate cancer (PCa) cases diagnosed. This increased incidence has led to overtreatment of many patients, as current pathology often cannot...

    R Dittrich, J Kurth, E A Decelle, E M DeFeo… in Prostate Cancer and Prostatic Diseases (2012)

previous disabled Page of 3