Search
Search Results
-
Effect of Al content in molten steel on interaction between MgO–C refractory and SPHC steel
The effect of Al content in molten steel on the interaction between SPHC steel (0.005–0.068 wt.% Al s and 19 × 10 −4 –58 × 10 −4 wt.% O) and MgO–C...
-
-
Formation mechanism of interface reaction layer between microporous magnesia refractories and molten steel and its effect on steel cleanliness
The ceramic filter in continuous casting tundish can effectively improve the cleanliness of high-performance steel by regulating tundish flow field...
-
Effect of nano-carbon black content on wetting phenomenon of molten steel and alumina–carbon ceramic filter substrates
The effect of nano-carbon black content (0, 8 and 12 wt.%) on the wettability of molten steel on Al 2 O 3 –C substrates was investigated by the sessile...
-
Melting and floating processes of inorganic materials in molten steel: Visualization physical simulation and mathematical modelling
It has been demonstrated that heat absorption method by using the inorganic material rod to cool the molten steel can significantly reduce the...
-
Scale-Invariant Geometries Arising from the Interaction Between a 9%Cr Steel and Molten Nitrate Salt
The surface topography and microstructure of a 9%Cr steel are shown to drastically impact its interaction with molten nitrate salt at 550 °C. In...
-
-
Solidification and heat transfer of molten steel slag particles during air quenching process
In order to effectively utilize the resources and energy of molten steel slag, the variation of precipitation phase and specific heat of air quenched...
-
Simulating molten pool features of shipbuilding steel subjected to submerged arc welding
Submerged arc welding process has been simulated to investigate the molten pool features of EH36 shipbuilding steel. One case only involved the...
-
Effect of atmosphere on the high-temperature interaction of molten Mg-10Ca alloy with steel substrates
Experimental studies of the high-temperature interaction of a molten Mg-10Ca alloy (10 wt% Ca) with steel substrates were performed, for the first...
-
Purification performance on molten steel of novel Al2O3-based ceramic filter prepared from microporous powder and nano-Al2O3 powder
Reticulated ceramic foam filters provide an effective way to purify molten steel by removing non-metallic inclusions. We proposed a novel strategy to...
-
Evolution of interfacial heat transfer, contact behavior and microstructure during sub-rapid solidification of molten steel with different hydrogen contents
Typical Q235 low-carbon steel samples with different hydrogen contents (0.0004, 0.0008, and 0.0013 wt.%) were prepared by adjusting the environment...
-
Numerical investigation on melting characteristics of scrap with heat and mass transfers in molten steel
Herein, a numerical simulation with simultaneous heat and mass transfers is carried out to investigate the scrap melting characteristics in molten...
-
Simulation of Centimeter-Level Particle Motion Behavior in the Ruhrstahl–Heraeus Reactor Based on Situ Formation Micro-phase Molten Steel Purification Technology
In situ formation micro-phase molten steel purification technology is a new inclusions control technology. In this study, to increase the...
-
Experimental study and cellular automata simulation of corrosion behavior of ferritic stainless steel in molten aluminum
The corrosion behavior of ferritic stainless steel (446) after being immersed in molten Al alloy at 750 °C for 1, 2, 4, and 8 h has been investigated...
-
Prediction of molten steel flow in a tundish with water model data using a generative neural network with different clip sizes
In continuous steel casting, a tundish distributes molten steel that is supplied from a ladle to molds. The pattern of molten steel flow in the...
-
Controlling oxygen content in electro-slag remelting steel by optimizing slag-steel reaction process
The thermodynamic equilibrium of deoxidation reactions between molten slag and steel was calculated using a slag-steel coupling thermodynamic model...
-
Wire-feed laser additive manufacturing of dissimilar metals via dual molten pool interface interlocking mechanism
Intermetallic compounds produced in laser additive manufacturing are the main factors restricting the joint performance of dissimilar metals. To...
-
Steel
Steel is a metal building material, characterized with high strength and versatility. Both structural steel and reinforcement steel which is used in...
-
Corrosion resistance of BN–ZrO2 ceramics with different additives by molten steel
BN–ZrO 2 ceramics with different additives such as SiC, Al 2 O 3 and MgAl 2 O 4 were fabricated by hot pressing sintering process to study sintering...
