1,097 Result(s)
-
Chapter and Conference Paper
The Effect of Electroplasticity on CNTs/Al Under Different Heat Treatment Tempers
The CNTs/Al is a promising lightweight high-strength composite in the aerospace industry. However, poor plasticity under room temperature limits its application. Eelectrically-assisted (EA) forming is expected...
-
Chapter and Conference Paper
Prof. Lihui Lang and His Contribution to Metal Forming Technology
Professor Lihui Lang is an internationally renowned scholar in the field of metal forming technology. He was deputy director of Youth Work Committee of China Society for Technology of Plasticity, editorial boa...
-
Chapter and Conference Paper
Hierarchically Porous, Diatomite-Based Absorbents Fabricated by Combining 3D-Printed Templating and Freeze Casting Techniques for Wastewater Treatments
Toxic wastewater remains an important and ongoing in industrial societies. The natural diatomaceous earth with nano-scale pores has demonstrated excellent removal capability of wastewater contaminated with...
-
Chapter and Conference Paper
Formation and Decomposition Mechanism of Carbides in AISI M35 High-Speed Steel Produced by ESR
The morphology of carbides in AISI ingot, as well as mechanism of the carbides at were investigated by thermodynamic calculations, microscopy analyses, and phase analyses. The calculation results indic...
-
Chapter and Conference Paper
Precipitation and Evolutionary Behavior of Eutectic Carbides in Electroslag Remelted 7Cr13N Steel
evolutionary behavior in were investigated and compared with 8Cr13MoV steel. The results showed that the eutectic at the center and edge of 7Cr13N ingot was reduced by 26.8% and 67.0% compared with 8C...
-
Chapter and Conference Paper
A Hybrid Incremental Sheet Forming Process for Fabricating Functional Surface Microtextures
Metallic components with large-area functional surface microtextures like microgrooves and dimples have special functions such as drag reduction and energy efficiency enhancement. Existing forming processes ar...
-
Chapter and Conference Paper
A Microstructural Based Unified Model for Creep-Ageing Behaviour of Aluminium Alloy Under Various Thermal Conditions
A microstructure based constitutive analytical model considering the temperature effects on creep-ageing behavior of aluminium alloy has been developed. The evolution of precipitates for age hardening, as well...
-
Chapter and Conference Paper
Manufacturing of Shape Memory Alloy Pipe Coupler: Modeling and Application
Shape memory alloy (SMA) pipe couplers offer a promising way to improve the reliability of pipe joints in various industrial applications. However, the deformation behavior of SMA during multistage joining pro...
-
Chapter and Conference Paper
Diffusion Bonding Process and Interface Performance of 2198 Al-Li Alloy
The diffusion bonding process can take full advantage of 2198 Al-Li alloy to produce high-efficiency integral structures. However, the dense and stable oxide layer on the surface to be bonded seriously hinders...
-
Chapter and Conference Paper
Preparation, Phase Structure, and Solubility of MnV2O6 and Mn2V2O7
The MnV2O6 and Mn2V2O7 were prepared by solid-state reaction using the initial reactant MnO and and scanning electron microscope were employed to verify and characterize phase composition and micro-images of th...
-
Chapter and Conference Paper
Hot Deformation Behavior of As-Cast Ti-6554 Alloy with Different Grain Morphologies
The hot workability of titanium alloy ingot is closely related to the morphology and size of initial grains. Based on the Gleeble thermal simulation experiment, the hot deformation behavior of equiaxed and col...
-
Chapter and Conference Paper
Improving the Reduction Swelling Behavior of Fired Hematite Pellets by Increasing Basicity
Oxide pellets are widely regarded as high-quality raw materials for BF ironmaking and iron processes due to their excellent strength, performance and environmental properties. The decrease in the availabilit...
-
Chapter and Conference Paper
Study on the Key Technology of Preparing Vanadium Base Alloy for Nuclear Power
This paper reports about the key technology of preparing vanadium base alloy (vanadium nitrogen alloy) for nuclear power. The large particle ammonium metavanadate and the control of low-temperature carbonizati...
-
Chapter and Conference Paper
Effect of MgO on Crystallization Properties of Mold Flux for Ultra-wide Slab Peritectic Steel
Controlling the heat flux at meniscus is one of the key aspects to prevent the formation of cracks during the continuous casting of crack-sensitive steel. This study investigated the influence addition on th...
-
Chapter and Conference Paper
An Atomistic Investigation of the Strengthening Mechanism of Aluminum Matrix Composites Reinforced by Intergranular and Intragranular Carbon Nanotubes
The mechanical characteristics of CNTs/Al composites are widely reported to be reinforced by carbon nanotubes (CNTs), but intergranular and intragranular CNTs play different roles in strengthening, whose detai...
-
Chapter and Conference Paper
Effect of RE Content on TiN Inclusions Formation in P110-Grade Casing Steel
Hydrogen resistance and sulfide stress resistance of are severely impaired by large . have the potential to modify the properties of non-metallic in . The effect of RE content on the formation of ...
-
Chapter and Conference Paper
Phase Transition Behavior of Rare Earth Oxide Ce2O3 in CaO–SiO2–5wt.% Al2O3 System at 1673–1873 K
Based on previous phase diagram studies on the CaO-SiO2-Ce2O3-5wt.% Al2O3 system at 1673–1773 K. In this study, the equilibrium phase diagram experiment at 1873 K was extended. The phase composition and phase rat...
-
Chapter and Conference Paper
Thermodynamic Analysis of Fe3Si Prepared from Steel Slag by Molten Salt Electrolytic
contains Fe, Si, Ca, , Mg, and other elements, but its complex and large yield to its resourceful treatment as an urgent problem. In order to realize the high value-added of , this paper proposed a ...
-
Chapter and Conference Paper
A Study of Internal Defects in Flexible Medium Hydroforming of Complex Structures of Fiber Metal Laminates
A flexible medium hydroforming and curing (FMHC) process for fiber metal laminates (FMLs) was proposed and utilized to manufacture FMLs parts with complex structures. The formation mechanisms of wrinkling defe...
-
Chapter and Conference Paper
Physics-Based Constitutive Model of Bi-metallic Ring Blank by Centrifugal Casting Under Hot Deformation
The hot deformation behavior of bi-metallic ring blanks has an important influence on the hot ring rolling. In this paper, the influences of strain rate and temperature on flow characteristic of centrifugal ca...
