Search

Search Results

1. Antifriction Nanocomposite Coatings that Contain Magnesium Carbide

   Abstract

   The results of studying the characteristics of friction and wear of the developed detonation nano-component coatings of Fe–Ti–SiC that also...

   V. P. Babak, V. V. Shchepetov, S. D. Harchenko in Journal of Friction and Wear

   Article 01 November 2019
   

2. Prospective Micro-Encapsulated Fuel with Silicon Carbide Protective Coat

   A promising direction in the development of the next-generation fuel is the development of fully ceramic micro-encapsulated fuel (FCM). Such fuel has...

   A. V. Beleevskii, I. E. Golubev, ... M. V. Yudin in Atomic Energy

   Article 01 September 2019

3. Investigation of dielectric parameters and AC conductivity of ZnO: TiC nanocomposite powders

   In this study, pure and (wt% 10, 20, and 30) titanium carbide (TiC)-reinforced zinc oxide (ZnO) nanoparticles were produced by sol–gel synthesis...

   Turan Gurgenc, Cevher Kursat Macit, ... Stefano Bellucci in Applied Physics A

   Article 25 August 2023
   

4. The Mechanical Properties of a SiC Composite Coating on Graphite Produced by the Atom-Substitution Method

   Abstract

   The mechanical properties of composite coatings of silicon carbide on graphite, deposited by a new method of annealing the initial graphite...

   A. S. Grashchenko, S. A. Kukushkin, ... A. V. Redkov in Technical Physics Letters

   Article 01 February 2022
   

5. Formation of Self-Bonded SiC Layers by Means of Laser Radiation

   Abstract

   The article investigates the possibility of obtaining products from self-bonded silicon carbide by laser irradiation in the absence of any...

   S. A. Lysenko, N. N. Yuryshev, N. P. Vagin in Physics of Atomic Nuclei

   Article 01 December 2022
   

6. Effects of surface roughness and thermal radiation on mixed convective (GO–MoS₂/H₂O–C₂H₆O₂) hybrid nanofluid flow past a permeable cone

   The main purpose of this work is to analyse the influence of mixed convective flow around a permeable cone in the presence of thermal radiation,...

   P. M. Patil, Madhavarao Kulkarni in Indian Journal of Physics

   Article 11 February 2022
   

7. Identification of the Spallation Properties and Ultimate Spall Strength of Heterogeneous Materials in Dynamic Processes

   Abstract

   Shock wave loading of heterogeneous materials was numerically investigated using three models: a homogeneous alloy model with experimental...

   A. E. Kraus, A. E. Buzyurkin, ... E. I. Kraus in Physical Mesomechanics

   Article 21 June 2024
   

8. Tailoring the optical properties (linear and nonlinear) of triple blended polymers via reinforcement of interchangeable proportions of mixed (SnO₂ and NiO) nanofillers for promising applications

   The recognition and characterization of semi-biopolymeric CMC/PVP/PEG blends through the incorporation of high purity NiO and SnO ₂ nanofillers with...

   Mohamed H. Abdel-Kader, Ali A. Alhazime, Mohamed Bakr Mohamed in Optical and Quantum Electronics

   Article 20 September 2023
   

9. Gasless Combustion of Ti–C–Al Reaction Mixtures in a Thermal Explosion

   Abstract

   Phase composition of thermal explosion products in compacts made of Ti–C–Al powder mixtures with an equiatomic ratio of titanium and black...

   A. V. Baranovskiy, G. A. Pribytkov, V. V. Korzhova in Combustion, Explosion, and Shock Waves

   Article 01 February 2023
   

10. STUDY OF PHYSICAL PROPERTIES OF TiC–NiCr CERMET COMPACTS OBTAINED BY HOT PRESSING

    Abstract

    Results of an experimental study of physical properties, microstructure, and phase composition of a TiC–NiCr cermet compact obtained by hot...

    A. E. Chesnokov, A. A. Filippov in Journal of Applied Mechanics and Technical Physics

    Article 01 April 2022
    

11. Gas Jet Deposition of Diamond onto a Steel Surface Covered by a Tungsten Carbide or Molybdenum Layer

    Results of studying the growth of diamond structures on steel specimens with the use of intermediate layers of molybdenum or tungsten carbide...

    A. K. Rebrov, I. S. Batraev, ... M. N. Khomyakov in Journal of Applied Mechanics and Technical Physics

    Article 01 November 2019

12. Contacts for SiC Nano-Microwatt Energy Converters

    Abstract

    The aim of the study is to consider the features of the physico–chemical processes in the near-contact region of the semiconductor SiC phase...

    A. V. Gurskaya, M. V. Dolgopolov, ... S. A. Radzhapov in Moscow University Physics Bulletin

    Article 01 February 2023
    

13. Structure and Magnetic Properties of Mechanically Alloyed Fe₉₀Al₈C₂ (wt.%) Powders

    The structure, morphological, thermal, and magnetic properties of the mechanically alloyed Fe ₉₀ Al ₈ C ₂ (wt.%) powders were investigated by using X-ray...

    F. Lemdani, S. Alleg, ... M. Azzaz in Journal of Superconductivity and Novel Magnetism

    Article 28 November 2022
    

14. Graphene and Its Derivatives: Various Routes of Synthesis

    Graphene and its derivatives have attracted significant attention among the scientific community due to their exceptional properties, such as their...

    Sudeepa Devi, Vijayeta Pal, ... Upendra K. Tripathi in Electrochemical Exfoliation of Graphene and Its Derivatives

    Chapter 2024
    

15. Biosensing Applications of MXene-Based Composites

    Mxene is a two-dimensional material which was invented in Drexel University in 2011. It is used for the production of biosensors to identify chemical...

    Ayesha Sharif, Shahzad Maqsood Khan, ... Saba Zia in Handbook of Functionalized Nanostructured MXenes

    Chapter 2023
    

16. Diverse Applications of MXene Composites for Electrochemical Energy Storage

    Making composites has been a popular method in recent years for creating durable and adaptable materials. MXenes are regarded as ideal prospects to...

    Muhammad Saleem Ashiq, Aqsa Iqbal, ... Ataf Ali Altaf in Handbook of Functionalized Nanostructured MXenes

    Chapter 2023
    

17. Composites Synthesized from Titanium, Carbon and Aluminum Powder Compositions

    The paper presents the results of the X-ray diffraction analysis, scanning electron microscopy, and electron probe micro-analysis of the products...

    G. A. Pribytkov, I. A. Firsina, ... M. G. Krinitsyn in Russian Physics Journal

    Article 14 January 2022

18. Mechanical Alloying of Iron–Titanium–Carbon (Diamond) Compositions

    Abstract

    Using methods of X-ray structural analysis, scanning electron microscopy, and Mössbauer spectroscopy, the features of the structure formation...

    S. A. Kovaliova, T. Yu. Kiseleva, ... S. V. Vosmerikov in Moscow University Physics Bulletin

    Article 01 December 2023
    

19. Phase Transformations at High Pressures and Temperatures in Fullerenes with Metal Additives

    Abstract

    The effect metal additives (7 at %) have оn phase transformations at pressures of 2 and 8 GPa in the temperature range of 500–1100°C in C ₆₀ ...

    P. A. Borisova, M. S. Blanter, ... O. A. Kondratev in Bulletin of the Russian Academy of Sciences: Physics

    Article 01 July 2021
    

20. Q-switched giant pulsed erbium-doped all-fiber laser with V₂ZnC MAX phase saturable absorber

    MXenes, drawn from MAX phases, are special two-dimensional substances with numerous advantages in nonlinear optics, specifically in giant and...

    Kawther M. Musthafa, Azura Hamzah, ... Sulaiman Wadi Harun in Optoelectronics Letters

    Article 30 April 2024