Search
Search Results
-
Microstructure and texture evolution of nonoriented silicon steel during the punching process
The iron core of a motor is mainly manufactured from rolled nonoriented silicon steel using a punching process that leads to deformation and texture...
-
Assessment of the Textured State of the Nonoriented Electrical Steel for Electromobiles and the Effect of the Texture on the Basic Magnetic Characteristics
AbstractThe structure and texture in recrystallized sheets of nonoriented electrical steel rolled according to different modes have been studied in...
-
Simulation of recrystallization based on EBSD data using a modified Monte Carlo model that considers anisotropic effects in cold-rolled ultra-thin grain-oriented silicon steel
A Monte Carlo Potts model was developed to simulate the recrystallization process of a cold-rolled ultra-thin grain-oriented silicon steel. The...
-
Slag-Steel Emulsification on a Modified RH Degasser
A new arrangement of RH snorkels is proposed in order to improve the slag metal interaction. According to this RHDeS design, the steel jet flowing...
-
Constitutive Model and Micro Hardening and Softening Mechanism for Nonoriented Electrical Steel
AbstractBecause of the occurrence at a high temperature of the phase transformations, hot finishing rolling of the non-oriented electrical steel...
-
On the transformation textures influenced by deformation in electrical steels, high manganese steels and pure titanium sheets
Transformation texture is normally different to deformation and recrystallization textures, thus influencing materials properties differently. As...
-
A Thermodynamic Model to Estimate the Formation of Complex Nitrides of Al x Mg(1–x)N in Silicon Steel
A complex nitride of Al x Mg (1− x ) N was observed in silicon steels. A thermodynamic model was developed to predict the ferrite/nitride equilibrium in...
-
Effect of typical elements on the heredity of hot-rolled and annealed texture in non-oriented electrical steel
Macroscopic texture and microscopic orientation in hot-rolled and annealed sheets of non-oriented electrical steel were studied by XRD and EBSD...
-
Bioresorbable Composites for Bone Reconstruction
AbstractMore than one million surgical procedures are done annually worldwide to restore bone functions lost as a result of fractures or deformities....
-
Magnetic Materials
Magnetic materials consist of a wide variety of metals and oxides. Their effective properties are given by a combination of two property categories:... -
Preparation and anisotropic properties of textured structural ceramics: A review
Ceramics are usually composed of randomly oriented grains and intergranular phases, so their properties are the statistical average along each...
-
Effects of warm rolling reduction on the microstructure, texture and magnetic properties of Fe-6.5 wt% Si steel
As the core materials with excellent soft magnetic properties, Fe-6.5 wt% Si steel was fabricated by using the warm rolling process due to its...
-
Formation of Ordered Mesoporous Thin Films Through Templating
Pores in the size range 2.0–20 nm are considered mesopores. Using the sol-gel process and a catalog of surfactant molecules, thin films with ordered... -
Coating induced residual stress in nonoriented electrical steel laminations
To produce the magnetic core of electric motors, nonoriented electrical steels (NOESs) are used with an electrically insulating coating applied to...
-
Formation of Ordered Mesoporous Thin Films Through Templating
Pores in the size range 2.0–20 nm are considered mesopores. Using the sol-gel process and a catalog of surfactant molecules, thin films with ordered... -
Microstructure and Texture Evolution of Strip-Cast and Hot-Rolled Fe-3 %Si Steel Sheet
The microstructure and texture evolution of Fe-3 %Si nonoriented silicon steel fabricated by twin-roll casting and hot rolling was investigated....
-
Effect of heat treatment in an ultra-high magnetic field on the formation of structure and texture in Fe-Si alloys
The structure and texture have been studied in Fe-Si alloys subjected to cold rolling and annealings in ultra-high dc magnetic fields (to 20 T) at...
-
Formation of Cube and Goss Texture After Primary Recrystallization in Electrical Steels
Recrystallization texture evolution in 2.1 pct Si electrical steel sheets was investigated with X-ray diffraction and electron backscattered...
-
Texture and Magnetic Properties of Rolled Fe-6.5 wt.%Si Thin Sheets
Thin (0.20 mm) Fe-6.5 wt.%Si sheets have been successfully fabricated by the continuous rolling method. The designed rolling process parameters,...