Abstract
More than one million surgical procedures are done annually worldwide to restore bone functions lost as a result of fractures or deformities. Various implants are available for bone reconstruction: however, choosing the material is still challenging. Use of allografts is limited because of the immune barrier and a deficiency of reconstruction material; implants based on metals or alloys have a higher elastic modulus compared with bones and require repeated surgery; and polymeric implants, although bioresorbable, have relatively poor mechanical properties. Intense studies are therefore carried out to develop composites based on resorbable polymers with filler components that vary in type, nature, and properties. This review considers the resorbable composites that are available for bone reconstruction. Based on the filler component, composites are classified into fiber-reinforced, dispersed particle-reinforced, and structural composites. The main advantages of dispersed filler components based on calcium phosphate are that they are simple to process, bioactive, biocompatible, and osteoconductive. A broad range of mechanical and biological properties and similarity in properties and structure to natural bones are the advantages of phosphate glass fiber-reinforced composites, resorbable polymers, and structural composites. Bioresorbable composite implants that are similar in their mechanical properties to bone tissue, persist until fracture consolidation is complete, and have an osteogenic potential, will possibly replace conventional metallic devices in the nearest future.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1134%2FS1995078020040151/MediaObjects/12201_2021_10153_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1134%2FS1995078020040151/MediaObjects/12201_2021_10153_Fig2_HTML.gif)
Similar content being viewed by others
REFERENCES
K. A. Hing, Phil. Trans. R. Soc. London, Ser. A 362, 2821 (2004). https://doi.org/10.1098/rsta.2004.1466
S. N. Parikh, J. Orthopedics 25, 301 (2002).
R. M. Tikhilov, Travmatol. Ortoped. Ross. 2 (60), 153 (2011). https://doi.org/10.21823/2311-2905-2011-0-2-153-159
V. I. Kalita, D. A. Malanin, V. A. Mamaeva, et al., Vestn. VolGMU, No. 4 (32), 17 (2009).
A. V. Karlov and I. A. Khlusov, Genii Ortoped., No. 3, 46 (2003).
A. V. Popkov, Genii Ortoped., No. 3, 94 (2014).
I. S. Razina, V. I. Chernova, M. A. Kolokolov, and I. N. Musin, Vestn. Kazan. Tekhnol. Univ. 17 (16), 162 (2014).
G. Tortora, Introduction to the Human Body (Harper Row, New York, 1988).
J. Hall, Guyton and Hall Textbook of Medical Physiology (Elsevier, Amsterdam, 2010).
K. A. Athanasiou, C. Zhu, D. R. Lanctot, et al., Tissue Eng. 6, 361 (2000). https://doi.org/10.1089/107632700418083
A. Nather, Bone Grafts and Bone Substitutes: Basic Science and Clinical Applications (World Scientific, Singapore, 2005). https://doi.org/10.1142/5695
F. G. Evans, Bull. N. Y. Acad. Med. 49, 751 (1973).
Y. An and R. Draughn, Mechanical Testing of Bone and the Bone-Implant Interface (CRC Press, Boca Raton, 1999). https://doi.org/10.1201/9781420073560
S. Ramakrishna, J. Mayer, E. Wintermantel, and K. W. Leong, Compos. Sci. Technol. 61, 1189 (2001). https://doi.org/10.1016/S0266-3538(00)00241-4
P. Schmutz, Quach-Vu, and I. Gerber, Electrochem. Soc. Interface 17, 35 (2008).
O. Yoshimitsu, G. Emiko, M. Takeshi, and K. Kihei, Biomaterials 25, 5913 (2004). https://doi.org/10.1016/j.biomaterials.2004.01.064
V. L. Skryabin, “Endoprostheses made of carbon composite material,” Doctoral (Med. Sci.) Dissertation (Vagner Perm. State Med. Univ., Yaroslavl’, 1993).
C. W. Hughes, K. Page, R. Bibb, et al., Br. J. Oral. Maxillofac. Surg. 41, 50 (2003). https://doi.org/10.1016/s0266435602002498
W. Schlickewei and C. Schlickewei, J. Macromol. Symp. 253, 10 (2007). https://doi.org/10.1002/masy.200750702
V. V. Agadzhanyan, A. A. Pronskikh, V. A. Demina, et al., Politravma, No. 4, 85 (2016).
D. Eglin and M. Alini, Eur. Cells Mater. 16, 80 (2008). https://doi.org/10.22203/ecm.v016a09
M. Bozkurt, C. Tigaran, M. Dalstra, et al., J. Foot Ankle Surg. 43, 138 (2004). https://doi.org/10.1053/j.jfas.2004.03.010
T. G. Volova, V. I. Sevastianov, and E. I. Shishatskaya, Polyhydroxyalkanoates Biodegradable Polymers for Medicine (Platina, Krasnoyarsk, 2006) [in Russian].
F. Baino, Acta Biomater. 7, 3248 (2011). https://doi.org/10.1016/j.actbio.2011.05.016
S. L. Woo, W. H. Akeson, R. D. Coutts, et al., J. Bone Jt. Surg., No. 15-A, 190 (1976).
S. A. Brown and J. Vandergrift, Biomater. Med. Dev. Art. Org. 9, 27 (1981). https://doi.org/10.3109/10731198109117598
J. A. Sziver, G. C. Weatherly, R. M. Pilliar, and H. U. Cameron, J. Biomed. Mater. Res. 15, 853 (1981). https://doi.org/10.1002/jbm.820150610
N. Gillett, S. A. Brown, J. H. Dumbleton, and R. P. Pool, Biomaterials 6, 113 (1985). https://doi.org/10.1016/0142-9612(85)90074-2
A. J. Tonino and R. C. Folmer, Clin. Mater. 2, 275 (1987).
S. Gogolewski, Injury 31, 28 (2000). https://doi.org/10.1016/s0020-1383(00)80020-0
M. Navarro, A. Michiardi, O. Castano, and J. A. Planell, J. R. Soc. Interface 5, 1137 (2008). https://doi.org/10.1098/rsif.2008.0151
P. Maman, M. Nagpal, and G. Aggarval, Nanobiomater. Tissue Eng., 121 (2019). https://doi.org/10.1016/B978-0-12-816909-4.00006-3
H. Hermawan, D. Ramdan, and J. R. P. Djuansjah, Metals for Biomedical Applications, Biomedical Engineering—From Theory to Applications (InTech, Rijeca, 2011). https://doi.org/10.5772/19033
V. I. Gomzyak, V. A. Demina, E. V. Razuvaeva, et al., Tonk. Khim. Tekhnol. 12 (5), 5 (2017). https://doi.org/10.32362/2410-6593-2017-12-5-5-20
N. Ashammakhi, H. Peltoniemi, and E. Waris, Plast. Reconstr. Surg. 108, 167 (2001). https://doi.org/10.1097/00006534-200107000-00027
N. Ashammakhi, R. Suuronen, and J. Tiainen, J. Craniofac. Surg. 14, 247 (2003). https://doi.org/10.1097/00001665-200303000-00021
A. U. Daniels, K. C. Melissa, and P. A. Kirk, J. Appl. Biomater. 1, 57 (1990). https://doi.org/10.1002/jab.770010109
A. Sodergard and M. Stolt, Prog. Polym. Sci. 27, 1123 (2002). https://doi.org/10.1016/S0079-6700(02)00012-6
J. C. Middleton and A. J. Tipton, Biomaterials 21, 2335 (2000). https://doi.org/10.1016/s0142-9612(00)00101-0
E. Waris, Y. T. Konttinen, N. Ashammakhi, et al., Expert Rev. Med. Dev. 1, 229 (2004). https://doi.org/10.1586/17434440.1.2.229
L. S. Nair and C. T. Laurencin, Prog. Polym. Sci. 32, 762 (2007). https://doi.org/10.1016/j.progpolymsci.2007.05.017
J. Vasenius, S. Vainionpää, and K. Vihtonen, Biomaterials 11, 501 (1990). https://doi.org/10.1016/0142-9612(90)90065-x
O. M. Böstman and H. K. Pihlajamäki, Clin. Orthop. 371, 216 (2000).
I. Vroman and L. Tighzert, Materials 2, 307 (2009). https://doi.org/10.3390/ma2020307
T. Maharana, B. Mohanty, and Y. S. Negi, Prog. Polym. Sci. 34, 99 (2009). https://doi.org/10.1016/j.progpolymsci.2008.10.001
Y. Ramot, M. H. Zada, A. J. Domb, and A. Nyska, Adv. Drug Deliv. Rev. 107, 153 (2016). https://doi.org/10.1016/j.addr.2016.03.012
T. Pohjonen, V. P. Heponen, M. Pellinen, et al., Trans. SOC. Biomater., No. 11 (1988).
J. Tiainen, Y. Soini, P. Tormala, et al., J. Biomed. Mater. Res. B 70, 49 (2004). https://doi.org/10.1002/jbm.b.30013
S. J. Holland and B. J. Tighe, Adv. Pharm. Sci. 6, 101 (1992).
P. A. Gunatillake and R. Adhikari, Eur. Cells Mater., No. 5, 1 (2003). https://doi.org/10.22203/ecm.v005a01
R. Chandra and R. Rustgi, Prog. Polym. Sci. 23, 1273 (1998).
T. K. Dash and V. B. Konkimalla, J. Control. Release 158, 15 (2012). https://doi.org/10.1016/j.jconrel.2011.09.064
J. M. Estelles, A. Vidaurre, J. M. M. Duenes, et al., J. Mater. Sci. Mater. Med. 19, 189 (2008). https://doi.org/10.1007/s10856-006-0101-2
K. J. Lowry, K. R. Hamson, L. Bear, et al., J. Biomed. Mater. Res. A 36, 536 (1997). https://doi.org/10.1002/(sici)1097-4636(19970915)36:4<536::aid-jbm12>3.0.co;2-8
JA. Simon, L. Ricci, and D. Cesare, Am. J. Orthop. 26, 665 (1998).
P. B. Maurus and C. C. Kaeding, Operative Tech. Sports Med. 12, 158 (2004).
S. Eshraghi and S. Das, Acta Biomater. 6, 2467 (2010). https://doi.org/10.1016/j.actbio.2010.02.002
M. Sabir, X. Xu, and L. Li, J. Mater. Sci. 44, 5713 (2009). https://doi.org/10.1007/s10853-009-3770-7
K. Rezwan, Q. Z. Chen, I. I. Blaker, and A. R. Boccaccini, Biomaterials 27, 3413 (2006). https://doi.org/10.1016/j.biomaterials.2006.01.039
R. Z. le Geros, Clin. Orthop. Relat. Res. 395, 81 (2002). https://doi.org/10.1097/00003086-200202000-00009
S. P. Mironov, A. L. Gintsburg, and N. A. Es’kin, in Proceedings of the 9th Workshop of Traumatologists-Orthopedists (Saratov, 2010), Vol. 3, p. 1122.
S. Pezzatini, R. Solito, L. Morbidelli, et al., J. Biomed. Mater. Res. A 76, 656 (2006). https://doi.org/10.1002/jbm.a.30524
C. Chatelet, O. Damour, and A. Domard, Biomaterials 3, 261 (2001). https://doi.org/10.1016/s0142-9612(00)00183-6
M. Dash, F. Chiellini, R. M. Ottenbrite, and E. Chiellini, Prog. Polym. Sci. 8, 981 (2011). https://doi.org/10.1016/j.progpolymsci.2011.02.001
V. E. Kamskaya, Nauch. Obozren. Biol. Nauki, No. 6, 36 (2016).
H. Ueno, T. Mori, and T. Fu**aga, Adv. Drug Deliv. Rev. 52, 105 (2001). https://doi.org/10.1016/s0169-409x(01)00189-2
GOST (State Standard) No. 32794-2014, Polymer composites. Terms and definitions (2015).
S. Fu, X. Feng, B. Lauke, and Y.-W. Mai, Composites, Part B 39, 933 (2008). https://doi.org/10.1016/j.compositesb.2008.01.002
I. Ahmed, A. I. Parsons, G. Palmer, et al., Acta Biomater. 4, 1307 (2008). https://doi.org/10.1016/j.actbio.2008.03.018
I. Ahmed, P. S. Cronin, E. A. Abou Neel, et al., J. Biomed. Mater. Res. B 898, 18 (2009). https://doi.org/10.1002/jbm.b.31182
Y. Z. Wan, Y. L. Wang, X. H. Xu, and Q. Y. Li, J. Appl. Polym. Sci. 82, 150 (2001). https://doi.org/10.1002/app.1834
M. Zimmerman, H. Alexander, R. Parsons, and P. K. Bajpai, Am. Chem. Soc., 132 (1991).
G. Jiang, M. E. Evans, I. A. Jones, et al., Biomaterials 26, 2281 (2005). https://doi.org/10.1016/j.biomaterials.2004.07.042
A. R. Boccaccini, M. Erol, W. Stark, et al., Compos. Sci. Technol. 70, 1764 (2010). https://doi.org/10.1016/j.compscitech.2010.06.002
J. Lu, M. Dejou, M. Descamps, G. Koubi, et al., J. Biomed. Mater. Res. 63, 408 (2002). https://doi.org/10.1002/jbm.10259
S. V. Dorozhkin, Biomaterials 31, 1465 (2010). https://doi.org/10.1016/j.biomaterials.2009.11.050
S. K. Misra, T. Ansari, D. Mohn, et al., J. R. Soc. Interface 7, 453 (2010). https://doi.org/10.1098/rsif.2009.0255
S. K. Misra, S. N. Nazhat, S. P. Valappil, et al., Biomacromolecules 8, 2112 (2007). https://doi.org/10.1021/bm0701954
C. Ohtsuki, M. Kamitakahara, and T. Miyazaki, J. R. Soc. Interface 6, 5349 (2009). https://doi.org/10.1098/rsif.2008.0419.focus
N. Ramesh, S. C. Moratti, and G. J. Dias, Soc. Biomater. 00B, 1 (2017). https://doi.org/10.1002/jbm.b.33950
A. Ambard and J. Mueninghoff, J. Proshodont. 15, 321 (2006). https://doi.org/10.1111/j.1532-849X.2006.00129.x
V. I. Pakhalyuk, S. I. Kalinin, and G. D. Olinichenko, Ortoped., Travmatol., No. 4, 162 (2003).
L. M. Bengus, N. V. Dedukh, and S. V. Malyshkina, Ukr. Morfol. Al’manakh 7 (3), 11 (2009).
E. Pietrzykowska, R. Mukhovskyi, and A. Chodara, Mater. Lett. 236, 625 (2019). https://doi.org/10.1016/j.matlet.2018.11.018
Q. Dong, L. C. Chow, T. Wang, et al., Colloids Surf., A 457, 256 (2014). https://doi.org/10.1016/j.colsurfa.2014.05.047
X. Wang, Y. Tan, B. Zhang, et al., J. Biomed. Mater. Res. A 89, 1079 (2009). https://doi.org/10.1002/jbm.a.32087
X. Wang, J. Ma, Y. Wang, and B. He, Biomaterials 23, 4167 (2002). https://doi.org/10.1016/s0142-9612(02)00153-9
Zh. Li, L. Yubao, Y. Ai**, et al., J. Mater. Sci.: Mater. Med. 16, 213 (2005). https://doi.org/10.1007/s10856-005-6682-3
S. Teng, E. Lee, B. Yoon, et al., J. Biomed. Mater. Res. A 88, 569 (2009). https://doi.org/10.1002/jbm.a.31897
Y. Zhang, J. R. Venugopal, A. El-Turki, et al., Biomaterials 29, 4314 (2008). https://doi.org/10.1016/j.biomaterials.2008.07.038
I. Yamaguchi, K. Tokuchi, H. Fukuzaki, et al., J. Biomed. Mater. Res. 55, 20 (2001). https://doi.org/10.1002/1097-4636(200104)55:1<20::aid-jbm30>3.0.co;2-f
C. **anmiao, L. Yubao, Z. Yi, et al., Mater. Sci. Eng. C 29, 29 (2009). https://doi.org/10.1016/j.msec.2008.05.008
I. Manjubala, I. Ponomarev, I. Wilke, and K. Jandt, J. Biomed. Mater. Res. A 84, 7 (2008). https://doi.org/10.1002/jbm.b.30838
W. Thein-Han and R. Misra, Acta Biomater. 5, 1182 (2009). https://doi.org/10.1016/j.actbio.2008.11.025
Z. Huang, Y. Dong, C. Chu, and P. Lin, Mater. Lett. 62, 3376 (2008). https://doi.org/10.1016/j.matlet.2008.03.045
X. Pang, T. Casagrande, and I. Zhitomirsky, J. Colloid Interface Sci. 330, 323 (2009). https://doi.org/10.1016/j.jcis.2008.10.070
A. Matsuda, T. Ikoma, H. Kobayashi, and J. Tanaka, Mater. Sci. Eng. C 24, 723 (2004). https://doi.org/10.1016/j.msec.2004.08.047
J. Venkatesan and S.-K. Kim, Mar. Drugs 8, 2252 (2010). https://doi.org/10.3390/md8082252
J. Oliveira, M. Rodrigues, S. Silva, et al., Biomaterials 27, 6123 (2006). https://doi.org/10.1016/j.biomaterials.2006.07.034
H. Xu and C. Simon, Biomaterials 26, 1337 (2005). https://doi.org/10.1016/j.biomaterials.2004.04.043
H. Yuan, N. Chen, X. Lu, and B. Zheng, J. Nan**g Med. Univ. 22, 372 (2008). https://doi.org/10.1016/S1007-4376(09)60009-5
Q. Hu, B. Li, M. Wang, and J. Shen, Biomaterials 25, 779 (2004). https://doi.org/10.1016/s0142-9612(03)00582-9
V. R. Sherman, W. Yang, and M. A. Meyers, J. Mech. Behav. Biomed. Mater. 52, 22 (2015). https://doi.org/10.1016/j.jmbbm.2015.05.023
M. Geiger, Adv. Drug Deliv. Rev. 55, 1613 (2003). https://doi.org/10.1016/j.addr.2003.08.010
M. S. Islam and M. E. Todo, Mater. Lett. 173, 231 (2016). https://doi.org/10.1080/21870764.2019.1600226
L. Chen, J. Hu, J. Ran, et al., Polym. Compos. 37, 81 (2016). https://doi.org/10.1002/pc.23157
G. Vozzi, C. Corallo, S. Carta, et al., J. Biomed. Mater. Res. A 102, 1415 (2014). https://doi.org/10.1002/jbm.a.34823
P. A. Karalkin, N. S. Sergeeva, V. S. Komlev, et al., Geny Kletki 11 (3), 94 (2016).
A. Z. Kharazi, M. H. Fathi, and F. Bahmany, Mater. Des. 31, 1468 (2010). https://doi.org/10.1016/j.matdes.2009.08.043
L. Ehrenfried, M. Patel, and R. Cameron, J. Mater. Sci.: Mater. Med. 19, 459 (2008). https://doi.org/10.1007/s10856-006-0061-6
H. Zhou, A. Touny, and S. Bhaduri, J. Mater. Sci.: Mater. Med. 22, 1183 (2011). https://doi.org/10.1007/s10856-011-4295-6
R. L. Dunn and R. A. Casper, “Method of producing biodegradable prosthesis and products,” Eur. Patent No. 146398 (1984).
R. A. Casper, R. L. Dunn, and B. S. Kelley, in Proceedings of Second World Congress on Biomaterials, Washington, D.C., 1984, p. 278.
B. S. Kelley, R. L. Dunn, G. C. Battiston, et al., in Proceedings of the 12th Annual Meeting of the Society of Biomaterials, Minneapolis-St Paul, Minnesota, USA, 1986, p. 167.
W. S. DePolo and D. G. Baird, Polym. Comp. 30, 188 (2009). https://doi.org/10.1002/pc.20554
X.-I. Liao, W.-F. Xu, Y.-I. Wang, et al., Trans. Nonferr. Met. Soc. China., No. 3, 748 (2009).
A. R. Boccaccini and V. Maquet, Comp. Sci. Technol. 63, 2417 (2003).
E. Pirhonen, H. Niiranen, T. Niemelii, et al., J. Biomed. Mater. Res. B 77, 227 (2006).
D. Brauer, C. Russel, S. Vogt, et al., J. Mater. Sci.: Mater. Med. 19, 121 (2008). https://doi.org/10.1007/s10856-007-3147-x
A. J. Parsons, I. Ahmed, P. Haque, et al., J. Biol. Eng., No. 6, 318 (2009). https://doi.org/10.1016/S1672-6529(08)60132-8
C. A. Scotchford, M. Shataheri, P. S. Chen, et al., J. Biomed. Mater. Res. A 96, 230 (2010). https://doi.org/10.1002/jbm.a.32977
S. S. Feng, Expert Rev. Med. Dev., No. 1, 115 (2004). https://doi.org/10.1586/17434440.1.1.115
H. Liu, E. B. Slamovich, and T. Webster, Int. J. Nanomed., No. 1, 541 (2006). https://doi.org/10.2147/nano.2006.1.4.541
P. Christel, F. Chabot, J. C. Leray, et al., “Biodegradable composites for internal fixation,” in Biomaterials (Wiley, New York, 1980).
M. Dauner, J. Mater. Sci.: Mater. Med. 9, 173 (1998). https://doi.org/10.1023/a:1008823804460
P. Tormala, S. Vainionpaa, M. Pellinen, et al., Trans. SOC. Biomater. 11, 501 (1988).
S. Vainionpaa, A. Majola, M. Mero, et al., Trans. SOC. Biomater. 11, 500 (1988).
X. Zhang, H. Hua, X. Shen, and Q. Yang, Polymer 48, 1005 (2007). https://doi.org/10.1016/j.polymer.2006.12.028
J. Wang, H. Li, J. Gao, and X. Meng, Adv. Mater. Res. 79, 2055 (2009). doi 10.4028/www.scientific.net/AMR.79-82.2055
E. Bergsma, W. E. de Bruijn, F. R. Rozema, et al., Biomaterials 16, 25 (1995). https://doi.org/10.1016/0142-9612(95)91092-d
A. Hoppe, N. S. Giildal, and A. R. Boccaccini, Biomaterials 32, 2757 (2011). https://doi.org/10.1016/j.biomaterials.2011.01.004
R. K. Brow, J. Non-Cryst. Solids 263–264, 1 (2000). https://doi.org/10.1016/S0022-3093(99)00620-1
Y. K. Lee and S. H. Choi, J. Korean Acad. Periodontol. 28, 273 (2008). https://doi.org/10.5051/jkape.2008.38.Suppl.273
P. Haque, A. J. Parsons, I. A. Barker, et al., Compos. Sci. Technol. 70, 1854 (2010).
E. Leonardi, G. Ciapetti, N. Baldini, et al., Acta Biomater. 6, 598 (2010). https://doi.org/10.1016/j.actbio.2009.07.017
M. Navarro, M. P. Ginebra, and J. A. Planell, J. Biomed. Mater. Res. A 67, 1009 (2003). https://doi.org/10.1002/jbm.a.20014
P. Melo, E. Tarrant, T. Swift, et al., Mater. Sci. Eng. 104, 1 (2019). https://doi.org/10.1016/j.msec.2019.109929
L. Onal, S. Cozien-Cazuc, I. A. Jones, and C. D. Rudd, J. Appl. Polym. Sci. 107, 3750 (2008). https://doi.org/10.1002/app.27518
T. Pohjonen, P. Tormala, J. Mikkola, et al., Proceedings of the 6th International Conference PIMS, Leeuwenhorst Congress Centre, The Netherlands, 1989, p. 34/1.
J. E. Raiha, Clin. Mater. 10, 35 (1992). https://doi.org/10.1016/0267-6605(92)90082-5
H. Pihlajamaki, O. Bostman, E. Hirvensalo, et al., J. Bone Jt. Surg. 74B, 853 (1992).
S. L. Stares, L. Boehs, and M. C. Fredel, Polymeros 22, 378 (2012). https://doi.org/10.1590/S0104-14282012005000056
R. Suuronen, T. Pohjonen, J. Hietanen, and C. Lindqvist, J. Oral Maxillofac. Surg. 56, 604 (1998). https://doi.org/10.1016/s0278-2391(98)90461-x
R. R. Bos, G. Boering, F. R. Rozema, and J. W. Leenslag, J. Oral Maxillofac. Surg. 45, 751 (1987). https://doi.org/10.1016/0278-2391(87)90194-7
J. E. Bergsma, W. C. de Bruijn, F. R. Rozema, et al., Biomaterials 16, 25 (1995). https://doi.org/10.1016/0142-9612(95)91092-d
Funding
This work was supported by the Russian Science Foundation (project no. 19-73-30003).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by T. Tkacheva
Rights and permissions
About this article
Cite this article
Tagandurdyeva, N., Yudin, V.E. Bioresorbable Composites for Bone Reconstruction. Nanotechnol Russia 15, 400–414 (2020). https://doi.org/10.1134/S1995078020040151
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995078020040151