Search
Search Results
-
Hot Working Property Study of 7055 Aluminum Alloy Based on Hot Shear-Compression Deformation
To fill the gap in the study of hot working properties of materials under complex stress and strain states, novel shear compression specimens were...
-
Hot-Working Characteristics and Dynamic Recrystallization Behavior of Hot Isostatically Pressed FGH4096 Superalloy
Hot-working characteristics, microstructure evolution, and dynamic recrystallization (DRX) of hot isostatically pressed (HIPed) FGH4096 superalloy...
-
Stabilization of the Hot-Working State of Die Steel during Thermomechanical Treatment
AbstractThe influence of thermomechanical treatment conditions on the behavior of sparingly alloyed die steel with controlled austenitic...
-
Effect of Hot Working Technology on Shape Memory Effect of Fe-24Mn-3Si-7Cr-3Ni Alloy Pipe Joints
The application of shape memory alloys is very suitable for develo** pipe joints, and Fe-Mn-Si memory alloy pipe joints show great promise. This...
-
Influence of Boron on the Flow Behavior of Hot Stam** Steel under Various Warm Working Conditions
Warm stam** of boron containing hot stam** grade steels is generally carried out at temperatures below austenitization temperature to reduce the...
-
Hot-Working Properties of Ni-Based Superalloy GH4169 in Different Initial States
The hot deformation behaviour of the GH4169 alloy in two different initial states (homogeneous and mixed-crystal states) was investigated by...
-
Novel Constitutive Equation for Predicting Dynamic Recrystallization During Hot Working Considering the Efficiency of Power Dissipation
The efficiency of power dissipation ( η ) in a dynamic material model has been conventionally used for qualitative predictions to estimate the hot...
-
Hot Compressive Deformation Characteristics of Al-9.3Zn-2.4Mg-1.1Cu Alloy
To understand the hot compression deformation characteristics of the self-developed Al-9.3Zn-2.4Mg-1.1Cu alloy, the hot compression tests of...
-
Hot Deformation Behavior and Mechanism of Ti–6Al–4V–2Mo–2Fe Titanium Alloy With Satisfactory Hot Workability
The high-temperature flow behavior, hot processing map, microstructure, and hot deformation mechanism of Ti–6Al–4V–2Mo–2Fe (Ti6422) designed by the...
-
Investigation of Hot Working Performance and Microstructure Evolution of GH1059 Superalloy Based on Processing Map
The hot working performance and microstructure evolution of an innovative GH1059 superalloy are investigated via Gleeble-3500 simulator under the...
-
Characterization of Hot Deformation Behavior and Processing Maps of Homogenized Al-Mg-Si-Sc-Zr Alloys
The hot compression test of Al-Mg-Si-Sc-Zr alloy in the range of 360-480 °C and 0.001-1 s −1 strain rate was studied by Gleeble 3500 thermomechanical...
-
Hot Deformation Behavior and Processing Map of Cu-Bearing Ship Plate Steels
Cu-bearing steels are widely used in the shipbuilding and medical industries because of their excellent strength, corrosion resistance, and...
-
Hot Workability and Microstructure Control of Ti6Al4V Alloy
Titanium alloy Ti6Al4V has been recognized for its high strength-to-weight ratio. Extensive deformation study has been conducted; however, defects...
-
Hot Deformation Behavior and Workability of a New Ni–W–Cr Superalloy for Molten Salt Reactors
The hot deformation behavior of a newly developed Ni–W–Cr superalloy for use in 800 °C molten salt reactors (MSRs) was looked into by isothermal...
-
Estimation and Selection of Working Gases for Plasma Application of Coatings with Stationary and Mobile Equipment
AbstractData on the estimation and selection of working gases for powder plasma build-up welding are reported. Being selected appropriately, these...
-
Testing of the Technology of Hot Rolling of Transformer Steel Strips with Edge-Drop Compensation Using Hot-Rolling Mill (Model 2000) at “Novolipetsk Steel”
This paper presents the results of testing under production conditions of the technology of rolling transformer steel strips with edge-drop...
-
Analysis of Cracking Causes of AISI 416 Martensitic Stainless Steel During Hot Rolling
Delta ferrite and sulfide in martensite steels may adversely affect the high-temperature mechanical properties of the metallic materials. The...
-
Anomalous hot deformation behavior and microstructure evolution of as-cast martensitic NiTi alloy during hot compression
The martensite phase with low crystal symmetry in NiTi alloy consists of internal twins and nano-layered compounds. The martensite phase has various...
-
Hot Deformation Behavior and Hot Rolling Simulation of a New FeCrMo Alloy for Piston Rings
The hot deformation behavior of a new FeCrMo precision alloy is studied by a hot compression test in the temperature range of 950-1150 °C at a strain...
-
Hot Deformation Characteristics of 2024 Aluminum Alloy
In this paper, the isothermal thermal compression simulation test of 2024 aluminum alloy was carried out. The deformation temperature is 573-723 K,...