Search

Search Results

1. Comparison Between Microwave Heating and Conventional Heating of Magnetite During Hydrogen Reduction

   The microstructure mechanism and kinetics of magnetite powder reduction in the H ₂ atmosphere were studied by both microwave heating and conventional...

   Meijie Zhou, Liqun Ai, ... Yipang Yuan in Metallurgical and Materials Transactions B

   Article 08 November 2023
   

2. High Heating Efficiency of Magnetite Nanoparticles Synthesized with Citric Acid: Application for Hyperthermia Treatment

   We report in this work the magnetic, morphological, and heating properties of magnetite nanoparticles (MNPs), which were synthesized by using...

   D. Ramirez, J. Oliva, ... C. Gomez-Solis in Journal of Electronic Materials

   Article 20 May 2022
   

3. Impact of the correlation between do** content and ions distribution in Gd-doped CoFe₂O₄ nanoparticles on their magnetic properties and heating efficiency

   In the present work, this Gd-doped CoFe ₂ O ₄ nanoparticles (CoGd _x Fe _{2- x} O ₄ NPs) were synthesized successfully by the co-precipitation method. The Gd...

   Luu Huu Nguyen, Truong Hai Bang, ... Pham Hong Nam in Journal of Materials Science

   Article 11 June 2024
   

4. Improved Suzuki–Miyaura reaction conversion efficiency using magnetic nanoparticles and inductive heating

   The use of magnetic nanoparticles in C–C coupling reactions enables the facile recovery of the catalyst under environmentally friendly conditions....

   Alejandro Villacampa, Luis Duque, ... Nieves Menéndez in Journal of Materials Science

   Article Open access 03 January 2022
   

5. Use of Corrosion Control Device to Control Reagent Water Treatment of Heating Networks

   Testing of the reagent method of water treatment with the use of corrosion control devices was performed at the district boiler house of Kyiv city....

   G. S. Vasyliev, Yu. S. Herasymenko in Materials Science

   Article 01 July 2023
   

6. Effect of Heating Rate on the Thermomechanical Cycle of Shape Memory Polymers

   Shape memory polymers have wide applications in aerospace and medical applications due to its ability to change shape when properly tuned. In the...

   R. Boomurugan, Kartikey Shahi, ... R. Velmurugan in Composite Materials for Extreme Loading

   Conference paper 2022
   

7. Procedure of Analysis and Control of Furnace Energy Efficiency

   Abstract

   This article describes the procedure of analysis and control of energy efficiency of continuous heating furnace based on establishment of...

   A. B. Biryukov in Steel in Translation

   Article 01 May 2023
   

8. Mechanical and microstructure properties of ultra-high strength boron steel using rapid resistance heating without soaking

   Resistance heating (RH) has broad prospects in hot stam** due to its rapid heating rate and high energy efficiency. In this work, the ultra-high...

   Shuang Wen, Yi Liu, ... **anhong Han in Journal of Materials Science

   Article 18 April 2023
   

9. Substantiation of Flotation Efficiency under Conditions of Heating of Wetting Films

   Abstract

   In investigation of the aggregative stability of disperse systems by sediment volumetry, a violation of the structure of water in the contact...

   S. I. Evdokimov, T. E. Gerasimenko in Russian Journal of Non-Ferrous Metals

   Article 29 December 2022
   

10. Precise thermoluminescence glow curve analysis of BeO ceramic plates with slow heating rates

    The glow curve components and thermoluminescence (TL) parameters of BeO ceramics plates with high bioequivalence were analyzed using extremely slow...

    Ema Sasaki, Natsumi Sugioka, ... Kiyomitsu Shinsho in Journal of Materials Science: Materials in Electronics

    Article 31 October 2023
    

11. Optical and morphological characterization of erbium phthalocyanine thin films on unpolished/polished substrates for enhanced solar water heating efficiency

    In the present investigation, erbium phthalocyanine thin films are fabricated using the spray pyrolysis ultrasonic method for 20.0 min. The erbium...

    D. H. Cuate-Gomez, J. M. Lugo, ... A. Garzón-Román in Emergent Materials

    Article 27 December 2023
    

12. Effect of Aging Applied with the Ultra-Low Heating Rate after CRYO Treatment on the Corrosion Resistance of Metastable β Titanium Alloy’s

    Abstract

    Metastable β titanium alloys were used in the aviation field in the first years of their discovery because of their high strength versus low...

    N. Yumak, Y. Kayali in Physics of Metals and Metallography

    Article 01 December 2022
    

13. Physical and acoustical performance of natural rubber foam prepared via microwave and convection heating techniques

    Conventional manufacturing techniques of natural rubber foam (NRF) require long processing time besides producing closed cell structure, a property...

    Nur Syuhada Ahmad Zauzi, Zulkifli Mohamad Ariff, ... Mohd Fadzil Ain in Journal of Rubber Research

    Article 11 July 2023
    

14. A Novel Method of Producing Iron Nugget Under Flash Heating

    This investigation demonstrates the formation of a unique coconut-shell-type iron nugget by flash heating an off-grade iron ore–graphite composite...

    Banty Kumar, Gour Gopal Roy in Transactions of the Indian Institute of Metals

    Article 13 July 2023
    

15. Impact of Heating Rate on the Tribological and Corrosion Properties of AISI 52100 Bearing Steel Consolidated via Spark Plasma Sintering

    This study investigates the influence of heating rate on the tribological and corrosion properties of 52100 bearing steel samples consolidated via...

    Akeem Yusuf Adesina, Muzafar Hussain, ... Ahmad Sorour in Metals and Materials International

    Article 15 November 2021
    

16. Improvement of the gas-dynamic and thermal modes of external heating of a sintering mixture layer

    Improving the gas-dynamic and thermal modes of external heating of a sintering charge layer, including preheating the layer, igniting the charge, and...

    D. N. Gushchin, D. M. Chukin, ... V. E. Kotyshev in Metallurgist

    Article 19 June 2024
    

17. Development of Wireless Self-heating Tooling for Polymer Composites Using Microwave Technology

    Recently, self-heating tooling, based on embedded pipes or circuits, has attracted extensive attention in processing of polymer composites due to...

    Wenzheng Xue, Yingguang Li, ... Youyi Wen in Applied Composite Materials

    Article 17 December 2022
    

18. Polydopamine adhesion of MXenes to cotton fabric for solar thermal and passive radiative heating

    Kee** the body temperature relatively constant in a cold environment is critical to maintaining thermal comfort and normal operation of various...

    Yang Wang, Weichao Liu, ... Jie **ong in Journal of Materials Science

    Article 22 February 2024
    

19. Electrospun carbon nanofiber-based flexible films for electric heating elements with adjustable resistance, ultrafast heating rate, and high infrared emissivity

    Carbon nanomaterials have shown great potential as electric heating elements in electrothermal applications. However, carbon-based heating elements...

    Zhenwei Li, Zijia Lin, ... Jie Yu in Journal of Materials Science

    Article 14 June 2021
    

20. MXene/Cellulose Composite Cloth for Integrated Functions (if-Cloth) in Personal Heating and Steam Generation

    Given the abundant solar light available on our planet, it is promising to develop an advanced fabric capable of simultaneously providing personal...

    Jian Chang, Bo Pang, ... Jiayin Yuan in Advanced Fiber Materials

    Article Open access 22 December 2023