Search
Search Results
-
Investigation of the effects of beam oscillations in electron beam–welded S1100M TMCP steel
The development of thermomechanically controlled processed (TMCP) high-strength steel (HSS) has significantly contributed to designing and develo**...
-
Recent Advances in Electron Beam Processing of Textile Materials
Preparation, property enhancement, and incorporation of new functionality in textile materials through green processes are objectives of modern... -
Electron Beam Irradiation Effects and In-Situ Irradiation of Nanomaterials
Electron beam irradiation of specimens is often referred to as damage but is inevitable in electron microscopy as the energetic electron beam... -
Strategies to overcome electron-beam issues in liquid phase TEM: Study of chemical processes
Liquid phase (or liquid cell) transmission electron microscopy (TEM) has become a powerful platform for in situ investigation of various chemical...
-
Characterization of Hypereutectoid Ti6Al4V–Cu Alloys Fabricated Using Electron Beam Additive Manufacturing
AbstractHypereutectoid Ti6Al4V–Cu alloys containing 15, 19 and 25 wt% Cu were obtained using wire-feed electron beam additive manufacturing....
-
Effect of beam offset on the microstructure and properties of a dissimilar tungsten/kovar electron beam weld
Butt joints of tungsten and Kovar were prepared by different electron beam welding processes. This study investigates the effect of beam offset on...
-
Solidification Behavior and Microstructure Evolution in Dissimilar Electron Beam Welds Between Commercially Pure Iron and Nickel
Electron beam welding processes have highly accurate control of both spatial and temporal heating profiles which provide unique capabilities in...
-
Electron-Beam-Induced Formation of Oxygen Vacancies in Epitaxial LaCoO3 Thin Films
The formation of oxygen vacancies in heteroepitaxial LaCoO 3 thin films deposited on different substrates was investigated by using electron beam...
-
Electron Beam Irradiation-Induced Compatibilization of Poly (Lactic Acid)-Based Blends
Poly (lactic acid) is the front runner of all emerging biopolymers in the global bio-plastic market, and its production and use have increased... -
Metal Additive Manufacturing Processes – Laser and Electron Beam Powder Bed Fusion
This chapter introduces the two main powder bed fusion (PBF)-based AM processes used for metals. The laser-based PBF and electron beam-based PBF... -
Electron Beam Radiation Technology Application in the Tyre Industry
Electron beam radiation (EBR) technology is one of the most promising technologies among other radiation-driven technologies and has been used in the... -
Numerical Simulation on Electron Beam Smelting Temperature Field of Novel Ni–Co-Based Superalloy
In this study, a three-dimensional (3D) transient thermal model for electron beam smelting (EBS) of a novel Ni–Co-based superalloy was developed...
-
Use of Electron Beam-Induced Current Technique to Characterize Transport Properties of Narrow-Gap-Energy Materials for IR Detection
The electron beam-induced current technique (EBIC) developed at CEA-Leti has been a valuable tool for studying the transport properties of minority...
-
Effect of Cryogenic Treatment on Microstructure and Tribological Property Evolution of Electron Beam Melted Ti6Al4V
Cryogenic treatment was used to improve the tribological properties of Ti6Al4V artificial hip joint implants. Cryogenic treatment at −196 °C with...
-
Microstructure Evolution and Mechanical Properties of TA15/Ti60 Tailor Welded Blank by Electron Beam Welding
The effect of post-weld heat treatment temperature on the microstructure and mechanical properties of TA15/Ti60 tailor welded blank by electron beam...
-
Electron Beam Powder Bed Fusion of ATI C103TM Refractory Alloy
The study investigated the use of electron beam powder bed fusion (EB-PBF) to fabricate niobium ATI C103™ alloy articles for microstructural...
-
Study on the Strength and Plastic Toughness Control Technology of Electron Beam Welding Joint of Titanium Alloy
Electron beam welding of titanium alloy is easy to get high strength welded joints generally. Due to the lack of ductility and toughness, the joint...
-
Additive Manufacturing of Titanium Aluminide Alloy Ti–Al–V–Nb–Cr–Gd by Selective Electron Beam Melting
We have studied the technological properties, chemical composition, and structure of a metal powder composition (MPC, 40–100 μm) made from a new...
-
Microstructure and Phase Composition of VT1-0, VT6, and VT14 Titanium Alloys Produced by Wire-Feed Electron-Beam Additive Manufacturing
AbstractUsing optical, scanning- and transmission-electron microscopy, and also electron backscatter diffraction, we demonstrate that the...
-
Modification of the Surface Properties of Hypereutectic Silumin by Irradiation with a Modulated Electron Beam
AbstractThis work is a continuation of study [1] devoted to the effect of a submillisecond pulsed electron beam on the surface of hypereutectic...