Search

Search Results

1. Microstructure, Texture Evolution, and Mechanical Properties of Thin AZ31B Mg Alloy Sheets Prepared by Two-Stage Rolling

   Magnesium (Mg) sheets that are thinner than 1 mm show significant advantages in the fabrication of shells of electronic equipment, as they are...

   Liangliang Wang, Linchao Sun, ... Yongjian Wang in Journal of Materials Engineering and Performance

   Article 22 March 2024
   

2. A Novel Method to Produce Harmonic Structured Ti with Excellent Compressive Properties

   The present study deals with the development of a harmonic structured commercially pure Ti using a novel and newly designed press-milling method to...

   Debdipta Banik, Rahul Mitra, ... K. Mondal in Transactions of the Indian Institute of Metals

   Article 14 May 2024
   

3. Structural Transformations and Multiferroic Properties of Bi_1−xEu_xFe_0.95Co_0.05O₃ (x = 0.05, 0.10, 0.15, and 0.20)

   Bi _{1− x} Eu _x Fe _0.95 Co _0.05 O ₃ ( x =0.05, 0.10, 0.15, and 0.20) nanoparticles were prepared through the sol-gel technique. Its structure, local electronic...

   **uqian Liang, Yongtao Li, ... Hongguang Zhang in Journal of Wuhan University of Technology-Mater. Sci. Ed.

   Article 17 April 2024

4. Early Stages of Fatigue Crack Initiation in Relation With Twin Boundaries in Polycrystalline Ni-Based Superalloy AD730^™

   Fatigue crack initiation in polycrystalline γ/γ′ Ni-based superalloys depends on many factors such as loading conditions, temperature, environment,...

   Julien Prouteau, Patrick Villechaise, ... Jonathan Cormier in Metallurgical and Materials Transactions A

   Article 10 December 2022
   

5. Morphology and Structure of a Charge of Detonation Nanodiamond Doped with Boron

   Abstract

   Two versions of powders of a charge of detonation nanodiamond doped with 0.96 and 0.73 wt % boron are obtained by explosion using a mixture...

   O. A. Shilova, G. P. Kopitsa, ... V. Yu. Dolmatov in Glass Physics and Chemistry

   Article 01 February 2022
   

6. Research Progress on Metallic Heterostructure Materials

   Heterostructured materials (HS) are a new type of novel materials that overcome the strength–conductivity trade-off due to significant differences in...

   Huwen Ma, Yanchun Zhao, ... Peter K. Liaw in Transactions of the Indian Institute of Metals

   Article 13 May 2024
   

7. Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB₂ particles

   Enhancing the high temperature mechanical properties and the thermal stability of aluminum alloys are in urgent demand for the lightweight...

   Siming Ma, **g Dai, ... Zhe Chen in Journal of Materials Science

   Article 16 August 2023
   

8. Copper-Containing Organic-Inorganic Nanosystems Based on Biocompatible Stabilizers: Synthesis, Structure, and Morphology

   Abstract

   Organic-inorganic composite systems for biomedical applications with zero-valent copper nanoparticles were synthesized. Hydrazine hydrate was...

   S. V. Valueva, R. Yu. Smyslov, ... E. F. Panarin in Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques

   Article 01 April 2023
   

9. Microstructural Changes on a Ternary Al–Cu–Si Eutectic Alloy with Different Pre-heated Mold Temperatures

   In order to understand the solidificationSolidification behavior and microstructural evolution of the Al–Cu–Si ternary eutectic alloyTernary eutectic...

   Seung-Hwan Oh, Sung-Soo Jung, Young-Cheol Lee in Light Metals 2023

   Conference paper 2023
   

10. A Comparative Analysis of the Adsorption Properties and Porous Structure of an ASD-4 Powder Impregnated with Copper Formate in Different Concentrations

    Abstract

    The adsorption properties of an ASD-4 aluminum powder and the powder modified with copper formate in different concentrations of 1, 2, 3, and...

    A. V. Ryabina, V. G. Shevchenko, V. N. Krasil’nikov in Protection of Metals and Physical Chemistry of Surfaces

    Article 01 February 2023
    

11. Regulation on Annealing Multiscale Laminar Structure and Mechanical Characteristics of Plain Medium Carbon Steel by Warm Pre-deformation Extent

    A heterogeneous structure of multi-scale ferrite and granular or short rod cementite was obtained by warm-rolled pseudo-eutectoid microstructure, and...

    Guolong Liu, Shuai Liu, ... Fucheng Zhang in Metallurgical and Materials Transactions A

    Article 15 February 2023
    

12. Penetration-Dependent Microstructures in TiO₂-Induced Weld Metal of EH36 Shipbuilding Steel

    Microstructural characteristics has been investigated along the weld metal penetration of EH36 shipbuilding steel processed by CaF ₂ –30 wt. pct TiO ₂ ...

    Yongwu Wu, **aobo Yuan, ... Cong Wang in Metallurgical and Materials Transactions A

    Article 01 March 2024
    

13. CNTs reinforced Al-based composites produced via modified flake powder metallurgy

    The bimodal Al–Mg alloy structure reinforced with carbon nanotubes was evaluated after the composites production through a modified flake metallurgy...

    B. Sadeghi, P. Cavaliere in Journal of Materials Science

    Article 03 January 2022
    

14. Effect of Milling Parameters on Size, Morphology, and Structure of Fe-Ga Binary Alloy Powder

    In this work, the evolution of the size and morphology of Fe-Ga particles during vibration ball milling is documented and discussed. Low intensity...

    V. A. Milyutin, R. Bures, ... F. Kromka in Journal of Materials Engineering and Performance

    Article 20 September 2022
    

15. Synthesis and characterization of AA7075/SiC/graphene hybrid composite

    The influence of AA7075 grain refinement, graphene reinforcement and SiC addition on the mechanical and tribological properties of hybrid composites...

    R Ranga Raj, J Yoganandh, M S Senthil Saravanan in Bulletin of Materials Science

    Article 10 May 2024
    

16. Effect of Rolling Temperature on the Mechanical Properties and Corrosion Behavior of Mg–Zn–Y–Nd Alloy Thin Sheets

    There is a growing demand for degradable membranes with sufficient mechanical properties to guide tissue regeneration in dental surgery. In the...

    Zhibin Liu, Guangya Zhu, ... Shaokang Guan in Acta Metallurgica Sinica (English Letters)

    Article 02 July 2024
    

17. The Role of Microstructure Inhomogeneity in Ti-6Al-4V Forging on Fracture Toughness Behavior

    Microstructure development and its control in dual-phase titanium alloy (Ti-6Al-4V) are challenging as they involve a complex processing route. Any...

    Anish Ranjan, Jyoti S. Jha, Sushil K. Mishra in Journal of Materials Engineering and Performance

    Article 27 April 2022
    

18. Model of Enhanced Strength and Ductility of Metal/Graphene Composites with Bimodal Grain Size Distribution

    A model is proposed that describes plastic deformation in metal/graphene composites with a bimodal grain size distribution of the metallic matrix....

    A. G. Sheinerman, M. Yu. Gutkin in Metallurgical and Materials Transactions A

    Article 22 October 2019
    

19. Effect of Stacking Fault Energy on Cryo Deformation Behavior of Austenitic Stainless Steels

    Cryorolling followed by flash annealing is one of the most promising and viable methods for modifying the mechanical properties of face centered...

    G. Venkata Sarath Kumar, K. Sivaprasad in Journal of Materials Engineering and Performance

    Article 26 April 2023
    

20. Improved Mechanical Properties of Structural Steel via Develo** Bimodal Grain Size Distribution and Intercritical Heat Treatment

    Intercritical annealing and tempering heat treatment combined with cold rolling were applied for improvement of tensile properties and...

    Mostafa Najafi, Hamed Mirzadeh, Mohammad Alibeyki in Journal of Materials Engineering and Performance

    Article 10 September 2019