Search

Search Results

1. Enhanced positive temperature coefficient intensity and reproducibility with synergistic effect of 0-D and 2-D filler composites

   Abstract

   Positive temperature coefficient (PTC) composites have received significant attention as electronic applications such as resettable fuses,...

   Gwang-Myeong Go, Siwoo Park, ... Yong-Ho Choa in Journal of Materials Science

   Article 03 June 2022
   

2. Experimental Bench for the Analysis of Belt Deformation in Belt–Pulley Systems by Digital Image Correlation

   Belt–pulley transmissions are a classical topic in mechanical engineering, usually studied following two approaches: the creep theory (Euler or...

   Francesco Bucchi, Francesco Frendo, Paolo Neri in Materials Design and Applications IV

   Chapter 2023
   

3. Investigating the mechanical behaviour of Fukushima MCCI using synchrotron Xray tomography and digital volume correlation

   A primary target towards the clean-up operation of the Fukushima disaster is the retrieval of Molten Core-Concrete Interaction (MCCI) products,...

   Charilaos Paraskevoulakos, Joachim Paul Forna-Kreutzer, ... Mahmoud Mostafavi in npj Materials Degradation

   Article Open access 07 July 2022
   

4. A systematic investigation to establish a structure-property correlation in 0.65PMN–0.35PT ceramics

   In this work, we present a systematic and detailed study on synthesis and characterization of near morphotropic phase boundary (MPB) composition,...

   T. Garg, M. Mukesh, ... Kifayat H. Mir in Journal of Materials Science: Materials in Electronics

   Article 22 January 2024
   

5. Correlation Characteristics of the Deformation Relief of an Aluminum Alloy Under High-Cycle Fatigue

   The mechanical properties, alloy microstructure, and fatigue resistance under cyclic loading of a 1.5 mm thick D16 sheet with a stress concentrator...

   G. G. Pysarenko, A. V. Byalonovych, ... A. M. Mailo in Strength of Materials

   Article 01 January 2024
   

6. Structure-property correlation of europium doped β-Ga₂O₃: an experimental and first-principle study

   In this work, the structure-properties correlation of Eu-doped β-gallium oxides was studied by both experimental as well as first-principle studies....

   Pramod Mandal, Udai P. Singh, Sudesna Roy in Journal of Materials Science: Materials in Electronics

   Article 30 October 2023
   

7. Assessment of Tensile Properties of Cast High Mg containing Al-Mg-Cu Aluminum Alloy with Correlation of Computed Tomography Scans and Optical Crack Surface Analysis

   In the casting of aluminum alloys, melt cleanliness has been crucial to achieve desirable final properties. Alloying elements, casting method and...

   K. Armagan Gul, Derya Dispinar, ... Ozgur Aslan in International Journal of Metalcasting

   Article 21 May 2023
   

8. Evolution characteristics of engineered cementitious composite pore structure and its correlation with the tensile property under simulated traffic vibrations at an early age

   The repair construction of bridge decks typically involves the method of half-width traffic and half-width construction, where traffic vibrations...

   Su Lu, Shuguang Liu, ... Lin Li in Journal of Materials Science

   Article 06 January 2024
   

9. Correlation between spin–phonon coupling and magneto-electric effects in CoFe₂O₄/PMN-PT nanocomposite: Raman spectroscopy and XMCD study

   We have investigated strain-induced spin lattice coupling in the CoFe ₂ O ₄ /0.65Pb (Mg _1/3 Nb _2/3 )O ₃ –0.35PbTiO ₃ (PMN-PT) composite system, evident by...

   Anju Ahlawat, Azam Ali Khan, ... R. J. Choudhary in Journal of Materials Science: Materials in Electronics

   Article 13 August 2022
   

10. Correlation Between Granule Strength and Green Strength at Compaction of Cemented Carbide Powder Materials

    The correlation between granule strength and green strength of hard metal powders is examined. The approach is based on experiments and numerics. In...

    Kristin Salmi, Erik Könberg, ... Per-Lennart Larsson in Journal of Materials Engineering and Performance

    Article Open access 10 August 2021
    

11. Correlation Between Processing Parameters in Direct Metal Deposition of IN625 Nickel-Base Superalloy

    In the present study, the direct metal deposition (DMD) process was used to deposit the IN625 superalloy on the IN738LC substrate. The relationships...

    Mostafa Amirjan, Masoumeh Khodabandeh in Journal of Materials Engineering and Performance

    Article 18 October 2021
    

12. The correlation between particle size distribution of FeSiBCuNb powders and properties of soft magnetic composites

    The FeSiBCuNb soft magnetic composities (SMCs) with five different particle size distribution (PSD) were prepared. The PSD of powders was quantified...

    Guibing Shi, Mingxu Wang, ... Li Wang in Journal of Materials Science

    Article 18 June 2024
    

13. Determination of the Non-Proportional Cyclic Hardening Coefficient Sensitive to the Loading Amplitude

    The research on determination of sensitivity of metal materials to non-proportional cyclic loading and the accompanying effects is analyzed. The...

    M. V. Borodii in Strength of Materials

    Article 01 November 2020
    

14. Study on correlation between the stray light protection functional film thickness and irradiation damage

    Contamination in high-energy laser systems by stray light irradiating on 6061 aluminum alloy components is one of the common problems that hinder the...

    **gxiang Gao, Yongzhi Cao, ... Yunlong Du in Journal of Materials Science

    Article 11 December 2023
    

15. Optoelectronic property correlation with structure and valence band spectra for Fe-doped Zn₂SnO₄-nanostructured films

    A high Figure of merit ( FOM ) is expected to justify the role of any TCO material as Transparent conducting electrode in the state-of-the-art devices....

    Isha Arora, Chandan Ghorui, ... T. Stephen Sathiaraj in Journal of Materials Science: Materials in Electronics

    Article 13 December 2023
    

16. Complementary In Situ Characterization of Superelasticity in Fe–Mn–Al–Ni–Ti Shape Memory Alloys by Acoustic Emission, Digital Image Correlation and Infrared Thermography

    Coupled in situ investigations were conducted on a Fe–Mn–Al–Ni–Ti single crystal deformed in compression and two Fe–Mn–Al–Ni–Ti oligo-crystals...

    M. Müller, R. Lehnert, ... A. Weidner in Shape Memory and Superelasticity

    Article Open access 18 June 2024
    

17. Correlation Between Process Parameters and Particle In-flight Behavior in AC-HVAF

    A computational fluid dynamics model for understanding the HVAF process and the influence of the process parameters on the particle flight properties...

    K. Bobzin, H. Heinemann, K. Jasutyn in Journal of Thermal Spray Technology

    Article Open access 09 February 2023
    

18. Investigation of structural and electrical properties of ITO thin films and correlation to optical parameters extracted using novel method based on PSO algorithm

    Thermally annealed DC sputtered indium tin oxide (ITO) thin films were investigated for improvement in properties. The structural and optoelectronic...

    Rachid Amrani, Elyes Garoudja, ... Mohamed Henini in Bulletin of Materials Science

    Article 09 January 2023
    

19. Application of Digital Image Correlation Method in the Study of Deformation of Notched Carbon Steel Plates and Finite Element Simulation

    This study aims to clarify the notch factor effect on the mechanical properties of carbon steel plates and the strain field distribution at the notch...

    Z. X. Chen, X. L. Peng, ... W. X. Wang in Strength of Materials

    Article 01 March 2023
    

20. Correlation Between Microstructure and Tensile Properties of Low-Carbon Steel Processed via Different Thermomechanical Routes

    The low-carbon steel revealed the presence of ferrite-pearlite and ferrite-martensite microstructures after being subjected to different...

    Arnab Sarkar, Pranabananda Modak, ... Anish Karmakar in Journal of Materials Engineering and Performance

    Article 19 July 2023