Search
Search Results
-
Insights into magnetism generation in pristine O-polar ZnO thin films through Kr ion implantation: experimental and theoretical study
Current research is in constant evolution, regularly revealing surprises that challenge our current understanding. Introducing magnetism into...
-
Enhanced recoverable energy density in Ca0.7Sm0.2TiO3-modified Bi0.5Na0.5TiO3–SrTiO3 ceramic capacitors
Ceramic capacitors are receiving increasing interest because of their applications in pulsed-power devices. The perovskite oxide Bi 0.5 Na 0.5 TiO 3 ...
-
Texture evolution prediction of diffusion bonded titanium alloy with hot gas bulging experiments by cross-scale simulation modeling
Develo** a high precision cross-scale model for diffusion bonded (DB) titanium alloy to predict macroscopic deformation and microstructure...
-
Flutter of a Sandwich Shell with Inner Cylinder and Annular Ribs
A promising mathematical model is considered for studying the aeroelastic stability of sandwich shells supported by an internal hollow elastic...
-
Development, characterization and evaluation of TiO2/Nb5+ thin films with potential for corrosion prevention of AISI 304 steel in acid medium containing chloride ions
TiO 2 /Nb 5+ film was prepared and deposited on 304 steel and preventive its potential for corrosion was evaluated. The film was obtained by the sol–gel...
-
Multi-scale synergistic regulation of hierarchical porous Ni@NiSe cathodes with low voltage gap, high capacity and long-term cycling stability in Li–CO2 battery
The Li–CO 2 battery often suffers from high overpotential and limited capacity due to the challenges associated with the adsorption of Li + and CO 2 and...
-
Effect of Corrosion Media on Biofilm Detachment and the Corrosion Mechanism of Serratia marcescens on Carbon Steel in River Water
The bacterial biofilms formed on metal surfaces play an important role in the corrosion of the metal. Biofilm detachment can greatly influence the...
-
Damage Identification of Wire Rope Under Strong Noise Background via Light-EfficientNetV2 and Magnetic Flux Leakage Image
Magnetic flux leakage (MFL) testing is an important way of non-destructive testing, preventing some major accidents of hoist equipment by identifying...
-
Effect of Pre-Deformation on Precipitation in Al–Zn–Mg–Cu Alloy
In this work, strengthening effects and evolution of precipitates in a pre-deformed Al–Zn–Mg–Cu alloy during ageing were investigated using Vickers...
-
Impact of Laser Shock Peening on Mechanical Properties of Wire Arc Additive Manufactured Grade 91 Steel and Monel-400 Bimetallic Components
This study investigates the effects of Laser Shock Peening (LSP) on the mechanical properties and microstructure of Wire Arc Additive Manufactured...
-
Fracture of the C15 CaAl2 Laves phase at small length scales
The cubic C 15 CaAl 2 Laves phase is an important brittle intermetallic precipitate in ternary Mg–Al–Ca structural alloys. Although knowledge of the...
-
Effect of Nb on Microstructure and Wear Property of Laser Cladding CoCrFeNiTiNbx High-Entropy Alloys Coatings
A group of CoCrFeNiTiNb x high entropy alloys (HEAs) coatings were produced by laser cladding. The effect of Nb content on the microstructure and wear...
-
Problems on Delamination of Fibrous Composites (to the 110TH Anniversary of the Birth of Yu. N. Rabotnov)
The main, well-known scientific results were obtained by outstanding scientist Yu. N. Rabotnov in the field of creep theory, hereditary elasticity,...
-
Microstructure-based interior cracking behavior of α + β titanium alloy under two stress ratios and intermediate temperature in the very high-cycle fatigue regime
Axial loading fatigue tests were conducted for α + β titanium alloy with two stress ratios to elucidate the microstructure-based interior cracking...
-
Polyethylene terephthalate composite and foam with superior mechanical properties from the synergistic simultaneous in situ fibrillation of liquid crystal polymer and polytetrafluoroethylene
Liquid crystal polymers (LCP) and polytetrafluoroethylene (PTFE) were in situ fibrillated to produce polyethylene terephthalate (PET)/LCP/PTFE...
-
-
SIF-based Fracture Analysis of Welded Joints in Vierendeel Trusses via FE Modelling
Steel hollow structure section (HSS) chord-to-branch joints in Vierendeel trusses are concerned for their proneness to fracture due to imperfection...
-
Measurements of Enthalpies of Mixing of Sn–Ga–In Ternary Alloy System by Calorimetric Technique
The ultimate objective of this study is to find a way to replace toxic lead-based solder with a non-toxic replacement that retains all of the...
-
Intelligent Wear Condition Prediction of Ball Bearings Based on Convolutional Neural Networks and Lubricating Oil
Ball bearings play a pivotal role in rotating machinery, making it crucial to detect their wear condition in real time for preventive maintenance....
-
Effect of varied initial dislocation densities on the anisotropic behavior of creep-aging in Al–Cu–Li alloy
Accurate forming predictions for the third-generation Al–Cu–Li alloys challenged by anisotropic creep-aging (CA) behavior. The creep-aging...
