Search
Search Results
-
Optimizing Spray Parameters of High Velocity Oxy-Fuel for Hardness of WC-12Co Coatings on A6061 Aluminum Alloy Substrate
This study optimizes HVOF spray parameters to improve the microhardness of WC-12Co coating on A6061 aluminum alloy by the Taguchi method. The studied...
-
Effect of high-density pulsed electric current on the formability of aluminum alloy
In this study, an energy-saving and highly efficient high-density pulsed electric current (HDPEC) method was used to improve the formability of the...
-
Effect of Laser Processing Pattern on the Mechanical Properties of Aluminum Alloy Adhesive Joints
Adhesive bonding is a promising joining technology for joining lightweight aluminum structures, offering advantages such as the absence of additional...
-
Crack detection in upsetting of aluminum alloy using acoustic emission monitoring technology
Acoustic emission technology relies on detecting and converting elastic (acoustic) waves from solids undergoing internal structural irreversible...
-
Joining of dissimilar metals between magnesium AZ31B and aluminum A6061-T6 using galvanized steel as a transition joining layer
A galvanized steel is used to join Mg AZ31B alloy and Al A6061-T6 alloy as a joining transition layer by cold metal transfer (CMT) method. Firstly,...
-
Study of explosive welding of A6061/SUS821L1 using interlayers with different thicknesses and the air shockwave between plates
In this work, SUS 304 interlayers with different thicknesses were used to weld A6061 aluminum alloy and SUS 821L1 duplex stainless steel. The effects...
-
On the Machining of Aluminum Alloy Series 7 with EDM
Electrical Discharge Machining is a thermo-electrical non-conventional machining process, which is widely used in machining difficult-to-cut...
-
Optimization of Machining Parameters Affects Chip Shrinkage Coefficient, Cutting Force, and Von-Mises When Machining Aluminum Alloy
The FEM (finite element method) is castoff as an alternative to the experimental process and accurately predicts a number of phenomena such as...
-
Investigation on Post-Weld Heat Treated Titanium-Aluminum Dissimilar Laser Welded Joint
The influence of post-weld heat treatment on the mechanical properties and microstructure of Ti/Al laser welded joints was studied, which included...
-
Effect of ultrasonic vibration-assisted two-stage age forming on properties of 7075 aluminum alloy
Aluminum alloy can obtain good forming effect and strength after age forming. The addition of an ultrasonic field in the two-stage age forming...
-
Improvement of the Reliability and Efficiency of Measurements of the Deformation Parameters of Aluminum Alloys Using a Universal Testing Machine
Abstract—The procedure of preparation of laboratory compression test for acquisition of data for plotting the isothermal flow curve of a deformed...
-
Clinching of inductively heated aluminum die casting
The aim of the investigations described in this article is to improve the clinching of aluminum die casting. The focus is on clinching an aluminum...
-
Fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al2O3 via friction stir process for enhanced mechanical performance
This study focuses on the fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al 2 O 3 , utilizing AA5083 plates. The...
-
Tribological Performance of Palm Stearin in Cold Forging Test Using Aluminum Alloy 6061
Nowadays, the use of lubricant in metal forming processes using vegetable oil is highly desired because it is a renewable resource and has a high...
-
Milling Force Model for Aviation Aluminum Alloy: Academic Insight and Perspective Analysis
Aluminum alloy is the main structural material of aircraft, launch vehicle, spaceship, and space station and is processed by milling. However, tool...
-
Local strain analysis under quasi-static tensile loading in Al/steel dissimilar friction stir weld by a digital image correlation method
A6061-T6 aluminum alloy plate was butt welded to type 304 stainless steel plate by a friction stir welding (FSW) technique to fabricate a dissimilar...
-
Research on surface integrity and its influencing factors in the high-speed cutting of typical aluminum/titanium/nickel alloys: a review
This article mainly discusses high-speed milling of aluminum/titanium/nickel alloys (common materials in the aerospace field, such as 7075-T6...
-
Impact strength assessment of SMA and low melting point alloy reinforced self-healing Al6061 composite
The present study focuses on comparative assessment of impact strength of self-healing Al6061 composite reinforced with shape memory alloy (SMA) and...
-
Optimization and characterization of T-joint laser welds for aluminum fin heat sink with copper base
Heat sink assemblies consisting of an A6061-T6 aluminum alloy fin and a C1100 copper base are prepared by T-joint welding using a near...
-
Flow behavior dependence of rod shearing phenomena of various materials in automatic multi-stage cold forging
Strain hardening, elongation, and shearing speed effects of flow behaviors on coil-rod shearing during automatic multi-stage cold forging (AMSCF) are...