![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Numerical simulation on the multiphase flow and reoxidation of the molten steel in a two-strand tundish during ladle change
A 3D mathematical model was proposed to investigate the molten steel–slag–air multiphase flow in a two-strand slab continuous casting (CC) tundish during ladle change. The study focused on the exposure of the ...
-
Article
Characteristics of Inclusions and Microstructures Around Solidification Hook of Low-Carbon Steel Continuous Casting Slab
The area around the solidification hook for low-carbon steel continuous casting slab is divided into four zones: zone A (the overflow zone), zone B (the capture zone), zone C (the zone between oscillation mark...
-
Article
Numerical Simulation on Multiphase Flow and Slag Entrainment During Casting Start of a Slab Continuous Casting Tundish
In the current study, a three-dimensional mathematical model combining the realizable k–ε turbulent model, volume of fluid (VOF) multiphase model, and heat transfer model was established to investigate the steel–...
-
Article
Neutron diffraction and phase evolution of the mechanically alloyed intermetallic compound ζ-FeZn13
High-energy ball milling with subsequent annealing is used to synthesize the intermetallic compound ζ-FeZn13. The mechanically alloyed phase in the as-milled state is determined to be nonequilibrium, or metastabl...
-
Article
Mechanical alloying studies in the Γ(Fe3Zn10) and Γ1(Fe5Zn21) single and mixed phase compositions
Homogeneous or uniform crystalline materials are obtained following the ball milling of pure elemental powders of Fe and Zn in proportions to yield single phases Γ(Fe3Zn10), Γ1(Fe5Zn21), and Γ + Γ1 mixed phase (F...
-
Article
Authors’ reply
-
Article
Mössbauer effect study of mechanically alloyed Γ and Γ1 Fe−Zn intermediate phases
The Mössbauer effect measurements of as-ball-milled mechanically alloyed Fe−Zn intermediate phases of Γ (Fe3Zn10) and Γ1 (Fe5Zn21) compositions exhibit characteristic spectra consisting of triplets. Each is chara...
-
Article
Kinetics and phase transformation evaluation of Fe-Zn-Al mechanically alloyed phases
Fixed composition ratios of Fe and Zn corresponding to γ-(Fe3Zn110), Γ1-(Fe5Zn21), δ-(FeZn7), and ζ-(FeZn13) with the addition of 5 pct Al (wt) were ball milled in an argon gas atmosphere to form homogenous alloy...
-
Article
Mössbauer effect study of mechanically alloyed γ and Γ1 Fe-Zn intermediate phases
The Mössbauer effect measurements of as-ball-milled mechanically alloyed Fe-Zn intermediate phases of Γ (Fe3Zn10) and Γ1 (Fe5Zn21) compositions exhibit characteristic spectra consisting of triplets. Each is chara...