655 Result(s)
within
Yu** Zhou
Chemistry
Characterization and Evaluation of Materials
Polymer Sciences
-
Article
Rapid degradation of thermosetting ester epoxies and monomer recovery methods
The degradation and recycling of waste epoxy resins is an urgent environmental problem, encouraging the use of degradable thermosetting epoxies. In this study, a high-performance thermosetting epoxy resin mate...
-
Article
Modulating cross-linked network structure of epoxy resin blends towards concurrently high intrinsic thermal conductivity and dielectric properties
High thermal conductivity (k) epoxy resin (EP) composites are widely used in electronic devices and power equipment where timely heat dissipation is urgently desirable. However, achieving a balance between high-k...
-
Article
Retraction Note: Two co(II)-based coordination polymers: photocatalytic dye degradation properties and treatment effect against colon cancer by inhibiting IL-6-STAT3 inflammatory signaling pathway
-
Article
Competition of Composition Fluctuation Modes in Weakly Segregated Salt-doped Symmetric Diblock Copolymers
Salt-doped block copolymers have widespread applications in batteries, fuel cells, semiconductors, and various industries, where their properties crucially depend on phase separation behavior. Traditionally, i...
-
Article
Preparation and antibacterial properties of polypropylene composite with bisphenol A-type benzoxazine
Polypropylene (PP) is a commonly used material in medical supplies. However, its lack of antibacterial properties has led to a frequent occurrence of healthcare-associated infections that need to be addressed....
-
Article
Pickering emulsion stabilized by lignin particles: Influence of oil phase, lignin concentration, and particle size
Pickering emulsion stabilized by lignin particles has many advantages such as high flexibility, natural non-toxicity, anti-oxidation, and anti-ultraviolet. In order to promote the application of industrial lig...
-
Article
Injection of a Self-propelled Polymer into a Small Circular Cavity
The injection of a polymer chain into a small circular cavity under tangential self-propelled force is studied by using Langevin dynamics simulation. Results indicate that the injection dynamics of the active ...
-
Article
Preparation, sustained release and cell imaging studies of rhodamine 6G@-nido-carborane fluorescent polymer
In this paper, rhodamine 6G and carborane were used as raw materials, and four fluorescent polymers were prepared by one-pot method, namely L100-55 fluorescent polymer (L100-55-B), EPO polymer (EPO-B), RS polymer...
-
Article
Based on Eudragit® encapsulated ionic polymer IR775@nido-carborane strategy: release, bioactivity and tumor cell imaging studies in simulated gastrointestinal environment
To enhance the bioavailability of carborane as a potential pharmacophore for BNCT, we labeled the modified o-carborane with the near-infrared dye IR775 and encapsulated it using two types of Eudragit® (pH-sensiti...
-
Article
Mechanic performance of phosphoric acid-based geopolymer cured in an open environment
Phosphoric acid-based geopolymer (PGEO) belongs to acidic material and has many applications in environmental disposal. The curing method has an important impact on the mechanic performance of geopolymers, the...
-
Article
Investigation on UV-curing Reprocessable Thermosets Bearing Hindered Urea Bonds and Their Composites with Modified Zinc Oxide Nanoparticles
In this study, a series of hindered urea bond (HUB) containing polyurethane-urea methacrylate prepolymers and a none HUB containing polyurethane methacrylate prepolymer were prepared using isobornyl methacryla...
-
Article
Surface-induced Microstructure and Performance Changes in P3HT Ultrathin Films
In this work, poly(3-hexylthiophene) (P3HT) ultrathin films (P3HT-T) were prepared by spin-coating a dilute P3HT solution (in a toluene: o-dichlorobenzene (Tol:ODCB) blend with a volume ratio of 80:20) with ultra...
-
Article
The Crystallization Behavior of L-Poly(lactic acid)/Polypropylene Blends: The Acceleration for Both L-Poly(lactic acid) and Polypropylene
For a polymer/polymer dismissible blend with two crystallizable components, the crystallization behavior of different components and the reciprocal influences between different crystals are interesting and imp...
-
Article
Lightweight, Strong and High Heat-Resistant Poly(lactide acid) Foams via Microcellular Injection Molding with Self-Assembly Nucleating Agent
Poly(lactide acid) (PLA) foams have shown considerable promise as eco-friendly alternatives to nondegradable plastic foams, such as polystyrene (PS) foams. Nevertheless, PLA foam typically suffers from low hea...
-
Article
In situ gellable poly(amino acid)s with AIE groups for noninterventional embolization therapy and fluorescence imaging of solid tumors
Transcatheter arterial embolization has been used clinically for the treatment of intermediate to advanced unresectable tumors, which is a complex procedure and may pose other risks. In order to achieve an eff...
-
Article
Recent Advances in Asymmetric Structural Composites for Excellent Electromagnetic Interference Shielding: A Review
Since electromagnetic pollution is detrimental to human health and the environment, numerous efforts have been successively made to achieve excellent electromagnetic interference shielding effectiveness (EMI SE)
-
Article
Side-Chain-Type Polyimide-Cu Complexes with Suppressed Activation Energy of Relaxation for Advanced High-Temperature Capacitor
The burgeoning growth of the new energy vehicles and aviation industry has escalated the need for energy storage capacitors capable of stable operation in harsh environments. The advent of metal-polyimide comp...
-
Article
Ordered Bicontinuous Network Structures Regulated by Orientational Interactions in a Rod-Coil Block Copolymer
The rich phase behavior of block copolymers (BCPs) has drawn great attention in recent years. However, the double diamond (DD) phase is rarely obtained because of the competition between the minimization of in...
-
Article
High-Performance α-Diimine Nickel Complexes for Facile Access of PE Elastomers with Exceptional Material Properties
For practicable elastomeric polyethylene, achieving high catalyst thermal stability and activity, along with precise control of polymer properties such as branching density, molecular weights, and distribution...
-
Article
Enhanced Crystallization of Poly(butylene adipate-co-terephthalate) by a Self-assembly Nucleating Agent
Poly(butylene adipate-co-terephthalate) (PBAT) is a promising biodegradable flexible polymer but suffers from slow crystallization rate, making it less attractive for some applications like the injection-molded p...
