![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Mechanical Properties of Cu-0.1Ag Alloys Deposited by Cold Spray with Various Powder Feed Rate and Heat Treatment
This work focuses on the properties of Cu-Ag alloys deposited by a cold spray process. Helium was used as the carrier gas and main gas to reach particles velocity of 823 m/s, which is in the middle range of t...
-
Article
A review on high power SOFC electrolyte layer manufacturing using thermal spray and physical vapour deposition technologies
Manufacturing of solid oxide fuel cell (SOFC) components remains nowadays a key point for the industrial development of this technology. Especially, the deposition of the dense electrolyte layer which is sandw...
-
Article
Comparison of the Properties of Cold-Sprayed Cu-0.5Cr-0.05Zr Alloys after Various Heat Treatments Versus Forged and Vacuum Plasma-Sprayed Alloys
In this work, Cu-0.5Cr-0.05Zr (wt.%) samples obtained by the cold spray process were studied regarding the microstructure and the mechanical properties versus several heat treatments. Ultimate tensile strength...
-
Article
Oxidation Control of Atmospheric Plasma Sprayed FeAl Intermetallic Coatings Using Dry-Ice Blasting
The performance of atmospheric plasma sprayed FeAl coatings has been remarkably limited because of oxidation and phase transformation during the high-temperature process of preparation. In the present work, Fe...