Skip to main content

and
  1. No Access

    Article

    Antibacterial and non-cytotoxic effect of nanocomposites based in polyethylene and copper nanoparticles

    In this study, an antibacterial, but not cytotoxic nanomaterial based on polyethylene and copper nanoparticles was prepared by in situ polymerization. PE–CuNps nanocomposites against Escherichia coli, completely ...

    L. A. Tamayo, P. A. Zapata, F. M. Rabagliati in Journal of Materials Science: Materials in… (2015)

  2. No Access

    Article

    Preparation of poly(ethylene-co-dicyclopentadiene) copolymers and a study on their post-polymerization epoxidation

    The copolymerization of ethylene with dicyclopentadiene (DCP) using the metallocene catalyst rac-dimethylsilylbis(indenyl)zirconium dichloride (Me2Si(Ind)2ZrCl2) proceeds with high activity producing materials wi...

    Brian C. Peoples, Vivianne N. Dougnac, Griselda B. Galland in Polymer Bulletin (2013)

  3. No Access

    Article

    Study on the copolymerization of propylene with norbornene using metallocene catalysts

    The copolymerization of propylene with norbornene, using the metallocene catalysts Me2Si(2-Me-Ind)2ZrCl2 and Ph2C(Flu)(Cp)ZrCl2 was evaluated. The presence of norbornene decreases the polymerization activity in b...

    V. N. Dougnac, B. C. Peoples, F. M. Rabagliati, G. B. Galland in Polymer Bulletin (2012)

  4. No Access

    Article

    Styrene copolymerization using a metallocenic initiator. Homo- and copolymerization of styrene with isoprene through zirconocene–MAO initiating systems

    The copolymerization of styrene with isoprene (Ip) has been tested using combined zirconocene–methylaluminoxane (MAO) initiating system. Both “half-sandwich” and real zirconium-based metallocenes were used. Re...

    F. M. Rabagliati, L. A. Muñoz, R. Quijada in Polymer Bulletin (2011)

  5. No Access

    Article

    A zirconia-polyester glycol coating on differently pretreated AISI 316L stainless steel: corrosion behavior in chloride solution

    The effect of zirconia and zirconia-polyester glycol hybrid coatings on the corrosion resistance of mechanically polished or anodized AISI 316 stainless steel (316L), was studied by potentiodynamic polarizatio...

    C. Martinez, M. Sancy, J. H. Zagal in Journal of Solid State Electrochemistry (2009)

  6. No Access

    Article

    Thermal and Mechanical Properties of Polyethylenes Synthesized with Metallocene Catalysts

    A series of high density polyethylenes (HDPE) were synthesized via homogeneous polymerization with metallocene catalyst in two different reactors (glass and stainless steel). The thermal and mechanical propert...

    J. Sacristán, R. Benavente, J. M. Pereña in Journal of Thermal Analysis and Calorimetry (1999)

  7. No Access

    Article

    ReBr(CO)3(3,3'-disubstituted-2,2'-biquinoline) modified complexes as initiating systems for styrene polymerization

    C. A. Terraza, J. Guerrero, S. A. Moya, F. M. Rabagliati in Polymer Bulletin (1998)

  8. No Access

    Article

    Polymerization of styrene by diphenylzinc-additive systems Part VII: Ph2Zn-(n-BuCp)2TiCl2-MAO systemsa

    F. M. Rabagliati, M. A. Pérez, R. Quijada in Polymer Bulletin (1998)

  9. No Access

    Article

    Some studies on styrene polymerization using new systems prepared from coordination metal compounds ReBr(CO)3(3,3′-dimethyl-2,2′-biquinoline)-diphenylzinc with and without MAO systems

    The monovalent rhenium compounds ReBr(CO)3(3,3′-dimethyl-2,2′-biquinoline) (I) and ReBr(CO)5 (II) could be used as catalysts in styrene polymerization after activation with diphenylzinc (Ph2Zn) and methylalumino...

    C. A. Terraza, J. Guerrero, S. A. Moya, F. M. Rabagliati, R. Quijada in Polymer Bulletin (1998)

  10. No Access

    Article

    Polymerization of styrene by diphenylzinc-additive systems

    The polymerization of styrene using combined systems of diphenylzinc-biscyclopentadienyltitanium dichloride-methylaluminoxane, Ph2Zn-Cp2TiCl2-MAO, in toluene at 60°C produced highly syndiotactic polystyrene. The ...

    F. M. Rabagliati, M. Pérez, H. A. Ayal, C. A. Terraza, R. Quijada in Polymer Bulletin (1997)

  11. No Access

    Article

    The soluble and insoluble product of diphenylzinc-water systems as initiator in styrene polymerization

    The solution resulting from reaction between Ph2Zn and H2O in benzene was used by itself and separated in soluble and insoluble fractions to initiate styrene polymerization. The soluble fraction produced the larg...

    C. A. Terraza, F. M. Rabagliati in Polymer Bulletin (1997)

  12. No Access

    Article

    Study of metallocene supported on porous and nonporous silica for the polymerization of ethylene

    Porous and nonporous silicas are good supports for the synthesis of coordinative heterogeneous catalysts for ethylene polymerization. The catalytic activity of nonporous Aerosil depends critically on the perce...

    R. Quijada, R. Rojas, L. Alzamora, J. Retuert, F.M. Rabagliati in Catalysis Letters (1997)

  13. No Access

    Article

    Block copolymers

    The preparation of acid chloride of poly(propylene oxide), PPO, the synthesis of prepolymer poly(p-benzamide), and of block copolymers of poly(p-benzamide)-b-poly(propylene oxide) are reported. The preparation...

    F. M. Rabagliati, M. Aravena, I. Lillo, H. A. Ayal, B. L. Rivas in Polymer Bulletin (1996)

  14. No Access

    Article

    Further studies on styrene polymerization using diphenylzinc-additive systems

    Diphenylzinc-water-organic monochloride systems, Ph2Zn-H2O-RCl, with n-, sec- and tert-butyl chloride (t-BuCl) and benzyl chloride (BzCl), were used to induce styrene polymerization. Improvement in polymer conver...

    C. A. Terraza, F. M. Rabagliati in Polymer Bulletin (1996)

  15. No Access

    Article

    Polymerization of styrene with diphenylzinc-water systems previously aged

    Diphenylzinc-water systems, Ph2Zn-H2O, were aged at various temperatures and for various lengths of time. These systems by themselves and those to which t-butyl chloride was added, Ph2Zn−H2O−ButCl, were used as i...

    C. A. Terraza, F. M. Rabagliati in Polymer Bulletin (1995)