Skip to main content

13 Result(s)

within Erh-Chiang Chen Remove this filter

and

  1. Article

    Open Access

    Enhanced performance of proton exchange membrane fuel cells by Pt/carbon/antimony-doped tin dioxide triple-junction catalyst

    A composite material comprising carbon black and Sb-doped SnO2 (ATO) is employed as a support for a Pt catalyst in a membrane electrode assembly (MEA) to improve the performance of a proton-exchange membrane fuel...

    Du-Cheng Tsai, Bing-Hau Kuo, Hung-Pin Chen, Erh-Chiang Chen… in Scientific Reports (2023)

    Download PDF (2543 KB) View Article

  2. No Access

    Article

    Influence of Al concentration on the structural and electrical properties of TiVCrAl alloy films grown via magnetron co-sputtering

    TiVCrAl films were co-sputtered from TiVCr and Al targets at room temperature. The effects of Al target power on the phase, microstructure, and mechanical, and electrical properties of the TiVCrAl films were i...

    Du-Cheng Tsai, Zue-Chin Chang, Erh-Chiang Chen, Yen-Lin Huang… in Applied Physics A (2022)

  3. No Access

    Article

    Effect of Al2O3-do** on the structure and optoelectronic characteristics of MgZnO thin film prepared by RF magnetron sputtering

    A systematic study of the effect of Al2O3 do** concentration in targets on the structure and optoelectronic characteristics of sputtered MgZnO films was conducted. The films were prepared on glass substrates by...

    Du-Cheng Tsai, Feng-Kuan Chen, Zue-Chin Chang, Bing-Hau Kuo… in Applied Physics A (2021)

  4. No Access

    Article

    Influence of Al content and annealing atmosphere on optoelectronic characteristics of Al:ZnO thin films

    Aluminum-doped zinc oxide (AZO) was cosputtered from ZnO and Al targets on glass substrates at room temperature. The effect of Al-target power and annealing atmosphere on structural and optoelectronic properti...

    Feng-Kuan Chen, Du-Cheng Tsai, Zue-Chin Chang, Erh-Chiang Chen… in Applied Physics A (2020)

  5. No Access

    Article

    Crystallization and Enzymatic Degradation of Maleic Acid-Grafted Poly(butylene adipate-co-terephthalate)/Organically Modified Layered Zinc Phenylphosphonate Nanocomposites

    Biodegradable nanocomposites were successfully synthesized using the maleic acid-grafted poly(butylene adipate-co-terephthalate) (g-PBAT) and organically modified layered zinc phenylphosphonate (m-PPZn), conta...

    Hsiang-Ting Wang, Erh-Chiang Chen, Tzong-Ming Wu in Journal of Polymers and the Environment (2020)

  6. No Access

    Article

    Varied deposition time of third stage process to fabricate Cu(In,Ga)Se2 absorber layer and device through a three-stage process

    A Cu-deficient Cu(In,Ga)Se2 (CIGS) absorber layer with different deposition time of third stage was fabricated using three-stage co-evaporation process. An appropriate deposition time not only eliminated excess C...

    Huan-Hsin Sung, Du-Cheng Tsai… in Journal of Materials Science: Materials in… (2018)

  7. No Access

    Article

    Enhanced enzymatic degradation in nanocomposites of various organically-modified layered zinc phenylphosphonates and poly (butylene succinate-co-adipate)

    In this work, two long-chain alkylamines, dodecylamine (DDA) and octadecylamine (ODA), intercalated with layered zinc phenylphosphonates (PPZns) were prepared using a simple chemical intercalation method. Both...

    Yi-An Chen, Dong-Lin Kuo, Erh-Chiang Chen, Tzong-Ming Wu in Journal of Polymer Research (2017)

  8. No Access

    Article

    Influence of deposition parameters on the structure and optical property of Zn(S,O) films

    This paper presents the influence of process parameters, including sputtering power, oxygen partial pressure (R O), and substrate temperature on the optical property of Zn(S,O) thi...

    Du-Cheng Tsai, Bing-Hau Kuo, Zue-Chin Chang… in Metals and Materials International (2017)

  9. No Access

    Article

    Effects of annealing time on the structural and optoelectronic properties of p-type conductive transparent Cu–Cr–O films

    Cu–Cr–O films were prepared by DC magnetron co-sputtering using Cu and Cr targets on fused silica substrates. The as-deposited Cu–Cr–O films were amorphous, semi-transparent, and insulated. After annealing at ...

    Chung-Hsing Sun, Du-Cheng Tsai… in Journal of Materials Science: Materials in… (2016)

  10. No Access

    Article

    Crystallization behaviors and microstructures of poly(butylene succinate-co-adipate)/modified layered double hydroxide nanocomposites

    A green biodegradable poly[(butylene succinate)-co-adipate] (PBSA) synthesized by polycondensation reaction is solution-mixed with organically modified layered double hydroxide (m-LDH) to fabricate the PBSA/m-...

    Yi-An Chen, Gang-Shian Tsai, Erh-Chiang Chen, Tzong-Ming Wu in Journal of Materials Science (2016)

  11. No Access

    Article

    Organically modified layered zinc phenylphosphonate reinforced stereocomplex-type poly(lactic acid) nanocomposites with highly enhanced mechanical properties and degradability

    In this study, stereocomplex-type poly(l-lactide) (SC-PLA)/organo-modified layered zinc phenylphosphonate (m-PPZn) nanocomposites were synthesized and characterized as a new material for green material usages. A ...

    Yi-An Chen, Erh-Chiang Chen, Tzong-Ming Wu in Journal of Materials Science (2015)

  12. No Access

    Article

    Effect of N2 flow on the structure and mechanical properties of (CrTaTiVZr)Nx coatings processed by reactive magnetron sputtering

    (CrTaTiVZr)Nx coatings were deposited via reactive radio frequency magnetron sputtering. The effects of N2 flow at 0–8 SCCM on the chemical composition, microstructure, and mechanical properties of the films were...

    Zue-Chin Chang, Du-Cheng Tsai, Erh-Chiang Chen in Journal of Materials Research (2015)

  13. No Access

    Chapter and Conference Paper

    Crystallization Kinetics and Thermal Behavior of Pcl/Multiwalled Carbon Nanotubes Composites

    In this work, Poly(-caprolactone) (PCL)/multi-walled carbon nanotube (MWNT) composites were prepared via the ultrasonically mixing of PCL and non-functionalized MWNT in a tetrahydrofuran solution. The fabricat...

    Erh-Chiang Chen, Tzong-Ming Wu in Experimental Analysis of Nano and Engineer… (2007)