-
Article
Field-Induced Transitions in RECo0.50Mn0.50O3 (RE = Dy, Eu)
We have studied the magnetization at high magnetic field for bulk ceramic samples of EuCo0.50Mn0.50O3 and DyCo0.50Mn0.50O3 at low temperature. For the Dy sample we can see two field transitions (near 2 T and 5 T)...
-
Article
BaTiO3 formation by thermal decomposition of a (BaTi)-citrate polyester resin in air
Barium titanate nanosized powders were prepared by a slightly modified Pechini method. The obtained polymerized resin was used as the precursor for BaTiO3 powder production. DTA TG thermal analysis indicated that...
-
Chapter
Bi4Ti3O12-Based Piezoelectric Ceramics for High Temperature Applications
High temperature piezoelectric ceramics based on WO3-doped Bi4Ti3O12 (WBIT) were prepared by two ways: chemical (hydroxide coprecipitation) and conventional oxides mixing. Sintering was carried out between 800°-1...
-
Article
Titanium local environment and electrical conductivity of TiO2-doped stabilized tetragonal zirconia
Solid state reactions in the ZrO2-Y2O3-TiO2system have been studied and the solid solubility limit of TiO2 in yttria stabilized tetragonal zirconia Y-TZP has been stablished. Structural characterization was carri...
-
Article
Phase transition and electrical conductivity in the system YMnO3-CaMnO3
Solid solution formation between the ferroelectric hexagonal compound YMnO3 and the semiconducting perovskite compound CaMnO3 has been studied in the Y-rich region of the pseudobinary system. The materials were p...
-
Article
Lower air-crystallization temperature and nanostructured yttria-doped tetragonal zirconia polycrystals ceramics by seeding assisted chemical coprecipitation
The crystallization temperature of yttria-doped tetragonal zirconia polycrystals (Y-TZP) amorphous precursors can be lowered 150 °C below that currently used (≥500 °C), if “seeding assisted chemical coprecipit...
-
Article
Effects of PbO excess in Pb(Mg1/3Nb2/3)O3–PbTiO3 ceramics: Part I. Sintering and dielectric properties
The influence of the presence of free PbO on densification, the perovskite/pyrochlore phase ratio, and corresponding dielectric properties has been studied for 0.9 PMN–0.1 PT-based ceramics with different adde...
-
Article
Structure and electrical behavior in air of TiO2-doped stabilized tetragonal zirconia ceramics
-doped YTZP ([%mol]3 Y2O3) compositions sintered in the temperature range of 1300 to 1450 °C, the tetragonal zirconia solid solutions field for the ZrO2-Y2O3-TiO2 system was established. The solubility of TiO2 in...
-
Article
Nanostructured and near defect-free ceramics by low-temperature pressureless sintering of nanosized Y-TZP powders
Nanosized (∼6 nm) Y-TZP (3 mol% Y2O3) powders have been produced by chemical co-precipitation (Y-inorganic + Zr-organic precursors) and thorough isopropanol-washing step, after calcining in air at 450 °C. The nan...
-
Article
Seeding effects on crystallization of air-calcined Y-TZP amorphous precursors
-
Article
Thermal expansion anomalies at the antiferroelectric-- ferroelectric (FRL), ferroelectric (FRL)--ferroelectric (FRH) and ferroelectric (FRH)--paraelectric transitions in PbZr1−xTixO3 (0) < x < 0.35
Abstracts are not published in this journal
-
Article
Ceramic–electrode interaction in PZT and PNN–PZT multilayer piezoelectric ceramics with AG/PD 70/30 inner electrode
Pb(Zr0.53Ti0.47)O3(PZT) and PbNi1/3Nb2/3O3-PZT (PNN–PZT) multilayers with Ag/Pd 70/30 inner electrodes have been studied from the point of view of the ceramic–electrode interaction. PZT multilayers have shown ...
-
Article
Improving sintering behaviour of BaTiO3 by small do** additions
The dielectric properties of BaTiO3 ceramics are associated with its microstructure, which depends on the stoichiometric ratio, dopant nature, and ceramic processing. Optimum densification at low temperatures to ...
-
Article
Preparation and sintering behaviour of submicronic Bi4Ti3O12 powders
Submicronic powders of Bi4Ti3O12 with different morphologies were prepared by both the oxalate coprecipitation and the conventional mixing oxides methods. Compacts of the two calcined powders were sintered at 850...
-
Article
Multilayer piezoelectric devices based on PZT
A PZT 53/47 was obtained by a modified chemical route. Small-particle-size powders were allowed to obtain high solid content, non-aqueous slips with Newtonian behaviour. The use of both the tape-casting techni...
-
Article
Low temperature fully densified nanostructured Y TZP ceramics
-
Article
Improvement of thermal stability and fracture toughness of Ti-TZP ceramics by small ceria additions
-
Article
Characterization of Pb(Zr, Ti)O3 thin films obtained by MOD
Pb(Zr, Ti)O3 thin films were deposited by dip-coating on polycrystalline alumina substrates by using an MOD method. The thickness and homogeneity of the films were measured as a function of dip rates and solution...
-
Article
Processing and microstructure of porous and dense PZT thick films on Al2O3
The processing of porous PZT thick-film ceramics on Al2O3 has been studied. The films were screen-printed from a thixotropic ink of PZT with a 58% solids content. The thick films were sintered between 1000 and 11...
-
Article
Phosphor-doped BaTiO3: Microstructure development and dielectric properties
The phosphor cation retards BaTiO3 formation during the first reaction stage, and favours Ba2TiO4 formation. As a consequence, the end of the reaction is only accomplished at 1150 °C. The average particle size of...