-
Chapter and Conference Paper
Two-Step Fringe Analysis for Fringe Projection Profile Measurement
Digital fringe projection method is a noncontact surface profiling technique. For accurate measurement, phase-shifting technique is usually adopted. However, the specimen may be moved during the time of image ...
-
Chapter and Conference Paper
Graphite-Reinforced 6201 Aluminum Alloy Fabricated by In-Situ Friction Stir Processing: Process, Microstructure, and Mechanical/Electrical Properties
has proved to be successful in the past two decades for the preparation of novel metal matrix with preferable properties. In this work, was added into 6201 through multi-pass in-situ FSP in order to fab...
-
Chapter and Conference Paper
Test Method of Mold Powder Melting Rate Based on Copper Bath and Its Application
Given the deficiencies of the present test methods of rate, a method based on the copper bath was established in this study. The correctness and reproducibility of this method were verified. The relative s...
-
Chapter and Conference Paper
A Simulation Study on Material Flow and Mixing Mechanism in Dissimilar Friction Stir Welding of AA6061 and AZ31 Alloys
During , proper material flow and mixing processes are of critical importance for a sound joint, but its remains unclear. In this paper, a Computational Fluid Dynamics (CFD)-based method was employed to s...
-
Chapter and Conference Paper
Integrated Experimental Phase Equilibria and Thermodynamic Modelling Research and Implementation in Support of Sustainable Pyrometallurgical Processing
Resolving the modern society challenges, such as sustainability, metal scarcity, and global warming, results in the increased complexity of the process streams in pyrometallurgy, that in turn requires accurate...
-
Chapter and Conference Paper
Structural and Magnetic Properties of Rare Earth Lanthanum-Doped Cobalt Ferrites
(CoFe2O4) nanoparticles exhibit high magnetocrystalline anisotropy, high coercivity, and medium saturation magnetization. It shows great potential in various fields. So it is an active research topic to synthesiz...
-
Chapter and Conference Paper
Plastic and Fracture Characteristics of WE43 Mg Alloy Under Complex Stress States
This paper investigates the and of WE43 Mg alloy under various stress states, including tension, compression, and shear. The digital image correlation technique is adopted to obtain highly accurate experim...
-
Chapter and Conference Paper
Leaching of Platinum Group Metals from Automobile Spent Catalyst
for recovering using oxidizing . is regarded as oxidant and hydrochloric acid as reagent. The experimental results show that the best conditions are as follows: the concentration of hydrochlori...
-
Chapter and Conference Paper
Correction to: Effect of Concentrations and Pressures of CO2 on Calcification–Carbonation Treatment of Bauxite Residue
The original version of the book was inadvertently published with an incorrect figure 2 in Chapter “Effect of Concentrations and Pressures of CO2 on Calcification–Carbonation Treatment of Bauxite Residue”. The fi...
-
Chapter and Conference Paper
Phase Evolution During the Oxidation Process of Low Grade Lead–Zinc Oxide Ore
The during the oxidation process of low was investigated at 1173–1473 K under air atmosphere. A thermogravimetric and differential thermal analysis was carried out to investigate the . The products obtain...
-
Chapter and Conference Paper
Study of Properties and Mineralization of Cu–Ni Bearing Industry Sludge
The properties and behaviour of a heavy metal with Cu and Ni content of 2.61 and 2.28% were investigated. The main phases of the sludge are calcium hydrophosphate, gypsum and amorphous hydroxide, silica ge...
-
Chapter and Conference Paper
Component Analysis of Defects in Secondary Special Brass Alloy
The direct smelting of scrap to produce high-quality brass not only solves the problem of municipal solid waste, but also realizes the reuse of valuable metals and alleviates the problem of shortage. How...
-
Chapter and Conference Paper
A Critical Review on Generation, Characteristics, and Utilization of Zinc Slag
(including slag and leach residue) belongs to solid waste from the pyrometallurgical and hydrometallurgical industry. Generated by the pyrometallurgical process, slag contains a high content of ...
-
Chapter and Conference Paper
Performance Evaluation of Hybrid EAF Slag and RAP in Pavement
This study evaluated the mixture of Hot Mix Asphalt (HMA) containing Electric Arc Furnace (EAF) slag and Reclaim Asphalt Pavement (RAP). The first design contains 30% EAF slag and the second hybrid design cont...
-
Chapter and Conference Paper
Effect of Concentrations and Pressures of CO2 on Calcification–Carbonation Treatment of Bauxite Residue
The calcification-carbonization process is attracting attention as a new, feasible method for clean production of and treatment of . The carbonization stage within the overall process was investigated, and ...
-
Chapter and Conference Paper
The Application of Intelligent Breaking and Feeding Technology for Aluminium Reduction Pot
Reducing voltage to achieve lower energy consumption has been a constant goal for operators. However, voltage reduction could be accompanied with and , having many disadvantages. In this paper, three di...
-
Chapter and Conference Paper
Recovery of Valuable Metals from the Leaching Tailings from the Arsenic/Nickel/Cobalt Residue
The after extracting arsenic from the arsenic/ / residue is treated to recover , , , and other valuable metals. The experimental results show that the best conditions are as follows: the liquid–solid r...
-
Chapter and Conference Paper
Removing Arsenic from the NiSO4 Solution Using Modified D301 Resin
Arsenic is removed resin. The modification is based on the fact that \( {\text{WO}}_{4}^{2 - } \)WO42- react with \( {\text{AsO}}_{4}^{3 - } \)AsO43- to form arsenotungstic ions. This study grafted $$ {\tex...
-
Chapter and Conference Paper
A Novel Method of Research on Dissolution Kinetics of Alumina in Mold Flux Based on Hot Thermocouple Technique
Rotating cylinder method and confocal laser scanning microscope have been applied to the research on of in . However, the former cannot observe , and the latter has such as complex operation. Hot therm...
-
Chapter and Conference Paper
Effect of Sodium Alkali Concentration on Calcification–Carbonization Process
The calcification-carbonization method is a recently developed hydrometallurgical treatment process which can effectively realize the scale of for and sodium . In order to reduce the water consumption in ...