Skip to main content

131 Result(s)

within Conference Paper Remove this filter Ji** Ma Remove this filter Characterization and Evaluation of Materials Remove this filter

previous disabled Page of 7
and

  1. No Access

    Chapter and Conference Paper

    Effect of RAP and Binder Properties on Indirect Tensile Strength and Dynamic Modulus of Cold Recycled Foamed Asphalt Mixtures with High RAP Content

    Cold recycling with foamed asphalt is a sustainable pavement rehabilitation technology and becomes more widely applied in many countries. However, there are still some ongoing scientific debates on the issues ...

    Wangyu Ma, Di Wang, Fan Gu, Adam Taylor… in Proceedings of the RILEM International Sym… (2022)

  2. No Access

    Chapter and Conference Paper

    A Laboratory Procedure for Improving the Design of Road Rehabilitation Actions: Study of a Real Case in a Highway Pavement

    Pavement rehabilitation has become an issue of major concern for road administrations. In the coming years, the development of more effective strategies for improving these actions will be crucial. On some occ...

    Fernando Moreno-Navarro, J. Sierra… in Proceedings of the RILEM International Sym… (2022)

  3. No Access

    Chapter and Conference Paper

    International Evaluation of the Performance of Warm Mix Asphalts with High Reclaimed Asphalt Content

    The Task Group 2 of the RILEM Technical Committee 264-RAP on non-cold recycling identified the need to gather some insights about possible durability issues associated with the combination of Warm Mix Asphalt ...

    Paul Marsac, Edoardo Bocci, Fabrizio Cardone… in Proceedings of the RILEM International Sym… (2022)

  4. No Access

    Chapter and Conference Paper

    Dynamic Deformation Behaviour of Al-Li Alloys Under High Strain Rate Deformation

    Since high-strength were gained much attention recently, investigating of high-strength lightweight AA2060-T8 sheets is crucial because of their outstanding mechanical properties. Thus, uniaxial tensile te...

    Ali Abd El-Aty, Yong Xu, Shi-Hong Zhang, Ma Yan, Xunzhong Guo, Jie Tao… in NUMISHEET 2022 (2022)

  5. No Access

    Chapter and Conference Paper

    Analysis of High Temperature Performance of Composite Asphalt Rubber Mixture

    Asphalt rubber mixture is often described as an environmentally friendly mixture due to its usage of recycled rubber gotten from used tires and the subsequent improved service life. It has been established tha...

    Haibin Li, Mingming Zhang… in Proceedings of the RILEM International Sym… (2022)

  6. No Access

    Chapter and Conference Paper

    Effect of Mg with Different Combination Form of Mg–Ca in MgO-Bearing Fluxes on Fluidity of Liquid Phase in Sintering Process

    MgO was considered to be an indispensable mineral composition of the modern process. reflecting the scope of effective bonding makes a clear distinction among in the process. Mg–Ca combination forms of...

    Shaoguo Chen, Wen Pan, Yapeng Zhang… in Characterization of Minerals, Metals, and … (2021)

  7. No Access

    Chapter and Conference Paper

    Zinc Extraction from Industrial Waste Residue by Conventional Acid Leaching

    Because consumption rises and the high-grade ore reserves decrease year by year, the secondary resources have been paid close attention. The effect of solution on the recovery from was studied in t...

    Tingfang **e, Chengyu Sun, Guojiang Li… in Characterization of Minerals, Metals, and … (2021)

  8. No Access

    Chapter and Conference Paper

    Particle Size Matching Mechanism of Blending Ore and Solid Fuel in Sintering Process

    The particle size of imported iron ores has gradually become bigger, which is adverse to mineralization and reaction process. At present, only imported iron ore fines are used in plant. And it is hard to c...

    Shaoguo Chen, Yapeng Zhang, Wen Pan… in Characterization of Minerals, Metals, and … (2021)

  9. No Access

    Chapter and Conference Paper

    Extraction of Zinc from Metallurgical Residue with a NH3–(NH4)2SO4–H2O System

    contains a certain amount of Zn, which is an important secondary resource for the production of Zn. In this article, a hydrometallurgical method in a NH3–(NH4)2SO4– is proposed to recover Zn selectively from ....

    Chengyu Sun, Aiyuan Ma, Yongguang Luo… in Characterization of Minerals, Metals, and … (2021)

  10. No Access

    Chapter and Conference Paper

    Study on Sinter Iron Ores and Titanium Ores Used in Pelletizing

    In this paper, study on and used in pelletizing was carried out. Bond work indexes of different and were measured. Ballability would be improved, and falling strength and compression strength of green ...

    Yan Zhang, **aojiang Wu, Hanglei Niu… in Characterization of Minerals, Metals, and … (2021)

  11. No Access

    Chapter and Conference Paper

    Recovery of Valuable Metals from the Leaching Tailings from the Arsenic/Nickel/Cobalt Residue

    The after extracting arsenic from the arsenic/ / residue is treated to recover , , , and other valuable metals. The experimental results show that the best conditions are as follows: the liquid–solid r...

    **xi Qiao, Ailiang Chen, **ntao Sun… in Characterization of Minerals, Metals, and … (2020)

  12. No Access

    Chapter and Conference Paper

    Using the SURF Model to Simulate Fragment Impact on Energetic Materials

    The Scaled Uniform Reactive Front (SURF) model developed by Menikoff and Shaw (Comb. Theory Model., 2012) is a High Explosive (HE) reactive burn model. It has been shown to accurately model plate impact shock ...

    **a Ma, Brad Clements in Dynamic Behavior of Materials, Volume 1 (2020)

  13. No Access

    Chapter and Conference Paper

    Study on Mineral Phase Composition and Viscosity of Hot Metal Pretreatment Desulfurization Slag Based on FactSage

    In order to systematically study the and change law of hot metal pretreatment , this paper summarizes and analyzes the composition produced by different desulfurization agents. Phase diagram simulation ...

    Tengfei Ma, Wufeng Jiang, Suju Hao… in Energy Technology 2020: Recycling, Carbon … (2020)

  14. No Access

    Chapter and Conference Paper

    Fabrication of Bilayer Nanoporous Copper from Rapidly Solidified Al70Cu30 Ribbons by Chemical Dealloying Technique

    this (NPC) was prepared by chemical of the Al70Cu30 (at.%) melt-spun . The of Al70Cu30 in 4.2 vol% HCl solution facilitates the bilayer NPC with various . The results show that the formation of pores...

    Hailan Ma, Bingge Zhao, Kai Ding, Yulai Gao in TMS 2020 149th Annual Meeting & Exhibition… (2020)

  15. No Access

    Chapter and Conference Paper

    Dynamic Response Monitoring and Analysis of In-Service Asphalt Pavement Based on FBG Measuring Technology

    This study aims to analyze the dynamic response characteristics of the serviced asphalt pavement subjected to the real random vehicle loads. Fiber Bragg Grating (FBG) sensors were embedded within four types of...

    **anyong Ma, Tongxu Wang, Zejiao Dong in Accelerated Pavement Testing to Transport … (2020)

  16. No Access

    Chapter and Conference Paper

    Analysis of Solidification and Thermal-Mechanical Behaviors in Continuous Casting

    (CC) is the most utilized making process today, but knowledge on the many complex phenomena that occur within the process could be gained. Issues such as transient flow patterns and immoderate amounts of ...

    John Resa, Matthew Moore, **ang Zhou… in TMS 2020 149th Annual Meeting & Exhibition… (2020)

  17. No Access

    Chapter and Conference Paper

    A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet

    Permanent magnets (PM) are critical components for electric motors and power generators. Non-rare earth (non-RE) PMs typically have small supply risks and low cost compared to rare earth element (REE) PMs. The...

    Bin Xu, Yujuan Zhou, Yongpeng Ma, **tian Wu… in TMS 2020 149th Annual Meeting & Exhibition… (2020)

  18. No Access

    Chapter and Conference Paper

    Toward 100% Recycling of Steelmaking Offgas Solid Wastes by Reallocating Zinc-bearing Materials

    High-zinc concentration has been one of the major barriers hindering in-plant of the solid wastes in an integrated steel mill. Therefore, zinc concentration is an important recyclability indicator of t...

    Naiyang Ma in Energy Technology 2020: Recycling, Carbon … (2020)

  19. No Access

    Chapter and Conference Paper

    Non-isothermal Kinetics of Carbothermic Reduction of Fayalite

    is one of the major components in many , such as and , which contains higher grade than that in minable . It is believed that the process at high is an effective way to reutilize -bearing sl...

    Zhi Li, Guojun Ma, **ang Zhang, Wei Zhang in 11th International Symposium on High-Tempe… (2020)

  20. No Access

    Chapter and Conference Paper

    Kinetics of Scrap Melting in Iron–Carbon Bath

    The of scrap is a limiting factor in controlling the temperature trajectory and scrap ratio of BOF process as well as the and productivity of EAF steelmaking. Prediction of the rate of scrap, the coe...

    Mengke Liu, Guojun Ma, **ang Zhang in TMS 2020 149th Annual Meeting & Exhibition… (2020)

previous disabled Page of 7