Search
Search Results
-
Seismic Behavior of Steel Reinforced Ultra-High Strength Concrete Composite Frame: Experimental and Numerical Study
The seismic behavior of steel reinforced ultra-high strength concrete (SRUHSC) composite frame was investigated through finite element analysis (FEA)...
-
Exploring physical hardening in bitumen based on 4 mm DSR measurements
Physical hardening (PH) is an important factor affecting the low-temperature performance of bitumen. At present, most PH characterizations are...
-
Degradation effects in concrete bound ferrochrome slag under aggressive sulphuric acid and sulphate attack
Ferrochrome slag (FS) having favourable mechanical properties) may be gainfully utilised as concrete aggregate. The concrete specimens with FS,...
-
Investigation of dry sliding wear characteristics of Al 7075 reinforced with SiC-graphite hybrid composites: multi-parameter optimization using grey relational analysis
Metal matrix composites made of aluminium and ceramics reinforced with silicon carbide (SiC) have desirable mechanical characteristics. On the other...
-
Analysis of permanent deformation in asphalt mixtures using Mohr–Coulomb criteria
This study aimed to investigate the influence of the internal friction angle on the mechanical properties and resistance to permanent deformation of...
-
Recent advancements in 3D printing for gear design and analysis: a comprehensive review
This comprehensive review paper delves into the analysis of 3D printed spur gears, with a keen focus on their design, material selection,...
-
Nonlinear size-dependent metamaterial-based tunable sandwich microbeams with enhanced vibration characteristics
Compared to homogeneous beams, metamaterial-based sandwich beams are known to be lighter and provide better mechanical characteristics. However,...
-
Behaviour of sheet pile wall on slo** ground for strip footing as surcharge with coir geotextile reinforced backfill soil
Sheet pile walls are driven into the ground surface to create a barrier that can withstand lateral earth pressure, hydrostatic pressures and...
-
Experimental and numerical investigation on temperature analysis and process optimization in friction stir welding of CuZn40 brass alloys
Friction stir welding (FSW) is a solid-state joining process widely used for its advantages in welding various materials, including CuZn40 brass....
-
Strategic Development of Ni–Cu–Fe2O3 Composite Coatings to Strengthen Mild Steel Against Corrosion
Mild steel is extensively employed in various industries due to its affordability and versatility. However, its susceptibility to corrosion poses a...
-
Performance Evaluation of Bryophyllum Pinnatum Leaves Extract as Corrosion Inhibitor for Mild Steel in 1 M Phosphoric Acid
The severe consequences of corrosion process cause global issues most especially in petroleum refineries. This research investigates performance...
-
Study on the dynamic characteristics of geogrids combined with rubber particles reinforced with calcareous sand
Reinforced calcareous sand is increasingly recognized as a promising roadbed filler. This study evaluated the effects of different reinforcement...
-
Intelligent Extraction of Surface Cracks on LNG Outer Tanks Based on Close-Range Image Point Clouds and Infrared Imagery
The precise detection and ongoing surveillance of surface fractures on exterior LNG storage tanks are crucial in guaranteeing the secure transit and...
-
Role of Bi/Te co-dopants on the thermoelectric properties of SnSe polycrystals: an experimental and theoretical investigation
A sustainable solution to the energy crisis may be found in thermoelectric materials and generators, capable of transforming thermal energy into...
-
Experimental Study on Properties of Graphene and Hollow Glass Powder-Added Ultra-High Strength Concrete
A new ultra-high strength concrete, in which oxidized graphene nanoplatelet (GO) and hollow glass powder (HGP) are added, has been developed by...
-
Characteristics and Formation Mechanism of Ca–Mg–Al–Si–O + (Ca,Mn)S Duplex Inclusions in Ca–S Free-Cutting Steel
Large numbers of long strip-shaped pure MnS inclusions in steel will result in anisotropy of mechanical properties. To obtain more duplex (Ca,Mn)S...
-
In-situ tensile deformation of austenitic stainless steels with various grain sizes during synchrotron and neutron diffraction
In this study, we conducted in-situ tensile deformation tests using synchrotron X-ray and neutron diffraction techniques on Nb-bearing AISI 201...
-
Study on Stress Corrosion Cracking of X100 Pipeline Steel in NS4 Solution
The X100 pipeline steel is classified as a type of high-strength, low-alloy steel that is mostly used in the construction of pipelines designed for...
-
Interfacial microstructure and electrochemical behavior of diffusion welded joints of Zr-Alloy and super duplex stainless steel
In this study, solid-state diffusion welded joints of zirconium alloy (Zr-Alloy) and super duplex stainless steel (SS) were prepared at 875 °C with...
-
The high-temperature oxidation behavior and mechanism in a powder metallurgy Ni-based superalloy featuring δ-Nb3Al addition
Incorporating strengthening phase with a higher thermal stability than traditional L 12 -ordered Ni 3 Al phase offers a promising avenue for develo**...
