Abstract
Graphene nanoribbon (GNR) is a flat ribbon-like 1D nanomaterial of graphene family rarely explored in the development of anti-corrosion coatings. In the present work, a bio-based anti-corrosion coating was fabricated using GNR as nanofiller in malenized linseed oil (MLO) polymer network. MLO polymer network was first prepared from commercially available linseed oil by malenization reaction at 80 °C using maleic anhydride. Later, GNR was synthesized from multiwalled carbon nanotube by oxidative unzip** method and incorporated into MLO polymer network to obtain the bio-based MLO–GNR nanocomposite. The as-prepared MLO and MLO–GNR coating materials were spin coated onto bare mild steel samples and cured at 80 °C for 24 h. The morphology and surface characteristics of coatings were studied by spectroscopic and microscopic techniques. Further, the anti-corrosion behaviour of bare and coated MS samples was investigated by potentiodynamic polarization and electrochemical impedance methods in a 3.5% NaCl medium. Among the samples, MLO–GNR-coated samples exhibited a high level of corrosion inhibition in the saline medium compared to uncoated MS sample as the damages and destruction activity were more on its surface than their counterparts. MLO–GNR nanocomposite coating exhibited robust corrosion resistance activity and showed 99.9% protection efficiency. Further, the MLO–GNR coating displayed higher stability in the saline medium as well as open-air environment establishing that the flat GNR molecule acts as excellent nanofiller in MLO polymer network to produce robust anti-corrosion activity leading to protection of mild steel.
Graphical abstract
Similar content being viewed by others
References
Sahu SC, Samantara AK, Seth M, Parwaiz S, Singh BP, Rath PC, Jena BK (2013) A facile electrochemical approach for development of highly corrosion protective coatings using graphene nanosheets. Electrochem Commun 32:22–26. https://doi.org/10.1016/j.elecom.2013.03.032
Gray JE, Luan B (2002) Protective coatings on magnesium and its alloys—a critical review. J Alloy Compd 336:88–113. https://doi.org/10.1016/S0925-8388(01)01899-0
Guo SF, Zhang HJ, Liu Z, Chen W, **e SF (2012) Corrosion resistances of amorphous and crystalline Zr-based alloys in simulated seawater. Electrochem Commun 24:39–42. https://doi.org/10.1016/j.elecom.2012.08.006
Ramezanzadeh B, Niroumandrad S, Ahmadi A, Mahdavian M, Mohamadzadeh Moghadam MH (2016) Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide. Corros Sci 103:283–304. https://doi.org/10.1016/j.corsci.2015.11.033
Umoren SA, Solomon MM, Obot IB, Suleiman RK (2019) A critical review on the recent studies on plant biomaterials as corrosion inhibitors for industrial metals. J Ind Eng Chem 76:91–115. https://doi.org/10.1016/j.jiec.2019.03.057
Madhusudhana AM, Mohana KN, Hegde MB, Nayak SR, Rajitha K, Swamy NK (2020) Functionalized graphene oxide-epoxy phenolic novolac nanocomposite: an efficient anticorrosion coating on mild steel in saline medium. Adv Compos Hybrid Mater 3:141–155. https://doi.org/10.1007/s42114-020-00142-8
Rajitha K, Mohana KN, Hegde MB, Nayak SR, Swamy NK (2020) Fabrication of ZnO/rGO and ZnO/MWCNT nanohybrids to reinforce the anticorrosion performance of polyurethane coating. Flatchem 24:100208. https://doi.org/10.1016/j.flatc.2020.100208
Dinker A, Agarwal M, Agarwal GD (2017) Preparation, characterization, and performance study of beeswax/expanded graphite composite as thermal storage material. Exp Heat Transfer 30:139–150. https://doi.org/10.1080/08916152.2016.1185198
Atta AM, Al-Hodan HA, Hameed RSA, Ezzat AO (2017) Preparation of green cardanol-based epoxy and hardener as primer coatings for petroleum and gas steel in marine environment. Prog Org Coat 111:283–293. https://doi.org/10.1016/j.porgcoat.2017.06.002
Lligadas G, Ronda JC, Galià M, Cádiz V (2013) Renewable polymeric materials from vegetable oils: a perspective. Mater Today 16:337–343. https://doi.org/10.1016/j.mattod.2013.08.016
Alam M, Akram D, Sharmin E, Zafar F, Ahmad S (2014) Vegetable oil based eco-friendly coating materials: a review article. Arab J Chem 7:469–479. https://doi.org/10.1016/j.arabjc.2013.12.023
Ding C, Matharu AS (2014) Recent developments on biobased curing agents: a review of their preparation and use. ACS Sustain Chem Eng 2:2217–2236. https://doi.org/10.1021/sc500478f
Espinosa LMD, Meier MAR (2011) Plant oils: the perfect renewable resource for polymer science?! Eur Polym J 47:837–852. https://doi.org/10.1016/j.eurpolymj.2010.11.020
Hegde MB, Nayak SR, Mohana KN, Swamy NK (2020) Garcinia gummigutta vegetable oil-graphene oxide nanocomposite: an efficient and eco-friendly material for corrosion prevention of mild steel in saline medium. J Polym Environ 28:483–499. https://doi.org/10.1007/s10924-019-01611-y
Thanawala K, Mutneja N, Khanna AS, Singh RK (2014) Development of self-healing coatings based on linseed oil as autonomous repairing agent for corrosion resistance. Materials 7:7324–7338. https://doi.org/10.3390/ma7117324
Khandelwal V, Sahoo SK, Kumar A, Sethi SK, Manik G (2019) Bio-sourced electrically conductive epoxidized linseed oil based composites filled with polyaniline and carbon nanotubes. Compos B Eng 172:76–82. https://doi.org/10.1016/j.compositesb.2019.05.050
Madhusudhana AM, Mohana KN, Hegde MB, Nayak SR, Rajitha K, Swamy NK (2020) Development of Al2O3.ZnO/GO-phenolic formaldehyde amine derivative nanocomposite: a new hybrid anticorrosion coating material for mild steel. Colloids Surf A Physicochem Eng Asp 601:125036. https://doi.org/10.1016/j.colsurfa.2020.125036
Sandeep S, Santhosh AS, Swamy NK, Suresh GS, Melo JS, Chamaraja NA (2018) A biosensor based on a graphene nanoribbon/silver nanoparticle/polyphenol oxidase composite matrix on a graphite electrode: application in the analysis of catechol in green tea samples. New J Chem 42:16620–16629. https://doi.org/10.1039/c8nj02325e
Asha PJ, Sabu C, Swamy NK, Anto A, Gangadharappa HV, Pramod K (2021) Graphene nanoribbon: an emerging and efficient flat molecular platform for advanced biosensing. Biosens Bioelectron 184:113245. https://doi.org/10.1016/j.bios.2021.113245
Swamy NK, Mohana KN, Hegde MB, Madhusudhana AM, Nayak SR, Rajitha K (2021) Fabrication of graphene nanoribbon-based enzyme-free electrochemical sensor for the sensitive and selective analysis of rutin in tablets. J Appl Electrochem 51:1047–1057. https://doi.org/10.1007/s10800-021-01557-x
Habibpour S, Um JG, Jun Y, Bhargava P, Park CB, Yu A (2021) Structural impact of graphene nanoribbon on mechanical properties and anti-corrosion performance of polyurethane nanocomposites. Chem Eng J 405:126858. https://doi.org/10.1016/j.cej.2020.126858
Arjmand M, Sadeghi S, Navas IO, Keteklahijani YZ, Dordanihaghighi S, Sundararaj U (2019) Carbon nanotube versus graphene nanoribbon: impact of nanofiller geometry on electromagnetic interference shielding of polyvinylidene fluoride nanocomposites. Polymers 11:1064. https://doi.org/10.3390/polym11061064
Tour J, Sikkema WA, Metzger A, Wang T (2017) Physical and electrical characterization of Texas PEG: an electrically conductive neuronal scaffold. Surg Neurol Int 8:84. https://doi.org/10.4103/sni.sni_361_16
Swamy NK, Mohana KN, Yashas SR (2022) GNR@CeO2 heterojunction as a novel sonophotocatalyst: degradation of tetracycline hydrochloride, kinetic modeling and synergistic effects. Colloids Surf A Physicochem Eng Asp 639:128324. https://doi.org/10.1016/j.colsurfa.2022.128324
Sanjay BP, Sandeep S, Santhosh AS, Karthik CS, Varun DN, Swamy NK, Mallu P, Nithin KS, Rajabathar JR, Muthusamy K (2022) Unprecedented 2D GNR-CoB nanocomposite for detection and degradation of malachite green-A computational prediction of degradation pathway and toxicity. Chemosphere 287:132153. https://doi.org/10.1016/j.chemosphere.2021.132153
Kosynkin DV, Higginbotham AL, Sinitskii A, Lomeda JR, Dimiev A, Price BK, Tour JM (2009) Longitudinal unzip** of carbon nanotubes to form graphene nanoribbons. Nature 458:872–876. https://doi.org/10.1038/nature07872
Fombuena V, Petrucci R, Dominici F, Jordá-Vilaplana A, Montanes N, Torre L (2019) Maleinized linseed oil as epoxy resin hardener for composites with high bio content obtained from linen by products. Polymers 11:301. https://doi.org/10.3390/polym11020301
Figueira RB, Silva CJR, Pereira EV (2016) Hybrid sol–gel coatings for corrosion protection of galvanized steel in simulated concrete pore solution. J Coat Technol Res 13:355–373. https://doi.org/10.1007/s11998-015-9751-7
Rajitha K, Mohana KN, Mohanan A, Madhusudhana AM (2020) Evaluation of anticorrosion performance of modified gelatin-graphene oxide nanocomposite dispersed in epoxy coating on mild steel in saline media. Colloids Surf A Physicochem Eng Asp 587:124341. https://doi.org/10.1016/j.colsurfa.2019.124341
Acknowledgements
The first author gratefully acknowledges the encouragement and partial financial support received from TEQIP, Phase-III (Govt. of India), and the management of Sri Jayachamarajendra College of Engineering, JSS Science and Technology University, Mysuru, Karnataka, India, during this research work.
Author information
Authors and Affiliations
Contributions
NKS: Investigation, Writing—original draft. KNSM: Review and editing, Validation, Supervision. MBH: Methodology. AMM: Resources.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflicts of interest to disclose.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Swamy, N.K., Mohana, K.N.S., Hegde, M.B. et al. Fabrication of 1D graphene nanoribbon and malenized linseed oil-based nanocomposite: a highly impervious bio-based anti-corrosion coating material for mild steel. J Appl Electrochem 52, 1133–1148 (2022). https://doi.org/10.1007/s10800-022-01692-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10800-022-01692-z