Search

Search Results

1. Microstructural and mechanical characterization of Al/Cu interface in a bimetallic composite produced by compound casting

   The bimetal set (Al/Cu) with Cu wire with 2.0, 2.5, and 3.0 mm diameters were cast at different casting temperatures and solidification times through...

   Shima Ahmadzadeh Salout, Seyed Mohammad Hossein Mirbagheri in Scientific Reports

   Article Open access 29 March 2024
   

2. Hybrid joining of cast aluminum and steel by compound casting and friction stir welding

   For structural components in the vehicle body, a trend can be observed where components such as suspension struts or side members in differential...

   Mario Senff, Wolfram Volk in Production Engineering

   Article 16 January 2023
   

3. Significantly Enhanced Mg/Al Bimetallic Interface by Compound Casting via Combination of Gd Addition and Vibration

   The coarse solidification microstructure and the existence of brittle intermetallic compounds (IMCs) are the main reasons for the poor interface...

   Feng Guan, Wenming Jiang, ... Zitian Fan in Metallurgical and Materials Transactions A

   Article 28 June 2023
   

4. Effects of mechanical vibration on filling and solidification behavior, microstructure and performance of Al/Mg bimetal by lost foam compound casting

   Al/Mg bimetal was prepared by lost foam solid-liquid compound casting, and the effects of mechanical vibration on the filling and solidification...

   Guang-yu Li, Feng Guan, ... Zi-tian Fan in China Foundry

   Article 13 February 2023

5. Dissimilar Joining of Al/Mg Light Metals by Centrifugal Compound Casting Process

   The centrifugal casting process was used to join and investigate the Al/Mg bimetallic interface composed of commercially-pure aluminum and magnesium...

   Morteza Sarvari, Sina Ghaemi Khiavi, ... Hassan Saghafian in International Journal of Metalcasting

   Article 28 June 2022
   

6. Investigation of the Compound Strength of Hybrid Casting Components with Different Variations of Coated and Undercut Sheet Metal

   Lightweight design can reduce CO ₂ emissions and improve energy efficiency, especially in the fuel-intensive transportation sector. Multi-material...

   Lukas Bruckmeier, Aron Ringel, ... Andreas Bührig-Polaczek in International Journal of Metalcasting

   Article Open access 17 May 2024
   

7. Oxygen-Free Compound Casting of Aluminum and Copper in a Silane-Doped Inert Gas Atmosphere: A New Approach to Increase Thermal Conductivity

   Novel aluminum-copper compound castings devoid of oxide layers at the interface between the joining partners were developed in order to increase the...

   Andreas C. Fromm, Khemais Barienti, ... Christian Klose in International Journal of Metalcasting

   Article Open access 15 December 2022
   

8. Effect of Mn Addition to Al–Si Alloy on the Layer Formed at the Interface with Cast Iron in Compound Casting

   This study aimed to investigate the effects of adding Mn to a 0.5%Cu-added A356 alloy on the interfacial layer formed between the alloy and cast iron...

   Kyoung-Min Min, Je-Sik Shin, Jeong-Min Kim in International Journal of Metalcasting

   Article 26 March 2023
   

9. Effect of HEA/Al composite interlayer on microstructure and mechanical property of Ti/Mg bimetal composite by solid-liquid compound casting

   In this study, HEA/Al composite interlayer was used to fabricate Ti/Mg bimetal composites by solid-liquid compound casting process. The Al layer was...

   ** Cheng, Jian-hua Zhao, ... Ya-jun Wang in China Foundry

   Article 14 October 2022

10. Interfacial Reactions Between Al and Ni During Compound Casting

    The formation of bonding between Ni and Al during the compound casting and a subsequent heat treatment is investigated. The preventive effect of the...

    Sina Safarzadeh, Ramin Raiszadeh in Metallurgical and Materials Transactions B

    Article 02 December 2021
    

11. Introduction to Casting

    Casting is one of the oldest methods of manufacturing and even today it finds extensive applications in manufacturing industries.

    D. K. Singh in Fundamentals of Manufacturing Engineering

    Chapter 2024
    

12. Design and Achievement of Metallurgical Bonding of Mg/Al Interface Prepared by Liquid–Liquid Compound Casting via a Co-deposited Cu–Ni Alloy Coating

    The metallurgical bonding of Mg/Al bimetal by liquid–liquid compound casting was realized via co-deposition Cu–Ni alloy coating. The metallurgical...

    Guangyu Li, Wenming Jiang, ... Zitian Fan in Metallurgical and Materials Transactions A

    Article 23 August 2022
    

13. Sn-Aided Joining of Cast Aluminum and Steel Through a Compound Casting Process

    Obtaining a strong bond between aluminum and steel is challenging due to poor wettability between aluminum melt and steel and brittle intermetallic...

    Aina Opsal Bakke, Arne Nordmark, ... Yanjun Li in Metallurgical and Materials Transactions B

    Article Open access 04 November 2021
    

14. A comparative study on Sn macrosegregation behavior of ternary Al-Sn-Cu alloys prepared by gravity casting and squeeze casting

    A comprehensive study on Sn macrosegregation behavior in ternary Al-Sn-Cu alloys was carried out by comparative analysis between gravity casting and...

    Ming Xu, Yan-guo Yin, ... Cong-chong Duan in China Foundry

    Article 21 January 2023

15. Effect of Ultrasonic Treatment and Squeeze Casting on the Microstructural Refinement of Al–Cu–Mn Alloys

    Aluminum–copper-based alloy has a broad liquidus to solidus temperature range, making it susceptible to the formation defects such as pores and...

    Yuliang Zhao, Weixiang He, ... Weiwen Zhang in International Journal of Metalcasting

    Article 19 June 2023
    

16. Simulation of Cooling and Synthesis of Bi₁₂GeO₂₀ by Casting

    Abstract

    For the first time, the possibility of accelerated production of bismuth germanate Bi ₁₂ GeO ₂₀ by casting is experimentally shown. The...

    T. V. Bermeshev, I. Yu. Gubanov, ... E. V. Mazurova in Inorganic Materials: Applied Research

    Article 01 August 2023
    

17. Antimicrobial Edible Starch Films Obtained By Casting and Thermo‑compression Techniques

    Physicochemical and functional properties of edible starch-based active films containing or not natamycin and/or nisin as affected by the processing...

    Sofía Berti, Rosa J. Jagus, ... Chelo González-Martínez in Food and Bioprocess Technology

    Article 25 July 2023
    

18. Effect of melt-to-solid volume ratio and preheating temperature on Mg/Al bimetals interface by centrifugal casting

    Compound casting is an efficient method for bonding dissimilar metals, in which a dramatic reaction can occur between the melt and solid. The...

    Morteza Sarvari, Mehdi Divandari, ... Sina Ghaemi Khiavi in China Foundry

    Article 01 May 2023

19. Dual-Alloy Sand Mold Casting: Main Principles and Features

    The multi-material injector casting (MMIC) process allows the production of castings with two different alloys in a single process. The metal is...

    Liudmyla Lisova, Maximilian Erber, ... Wolfram Volk in International Journal of Metalcasting

    Article Open access 02 March 2024
    

20. Bond formation between aluminum-based metal matrix composites and aluminum alloys in compound castings

    The use of inserts allows for the selective reinforcement of castings to improve mechanical properties, including surface hardness and wear rate....

    Luke Osvatic, Pablo Zertuche Flores, ... Pradeep Rohatgi in International Journal of Metalcasting

    Article 12 February 2024