Search
Search Results
-
Hydration, fresh, mechanical, and freeze-thaw properties of cement mortar incorporated with polymeric microspheres
Air-entraining agent (AEA) has been used for decades to improve cementitious materials’ freezing–thawing resistance. However, the strength reduction...
-
Effect of Partial Replacement of Fly Ash by Decoration Waste Powder on the Fresh and Mechanical Properties of Geopolymer Masonry Mortar
This study aims to investigate the feasibility of using decoration waste powder (DWP) as a partial replacement for fly ash (FA) in the preparation of...
-
Facile synthesis, characterization, biocompatibility and protein loading/release property of zinc-doped hollow mesoporous bioactive glass nanospheres
We synthetized hollow mesoporous bioactive glass nanospheres (HMBGS) and zinc-doped hollow mesoporous bioactive glass nanospheres (Zn-HMBGS) in which...
-
Study of Cement-Based Mortars Reinforced with Guaruman Fibers in the Fresh State
Guaruman fiberGuaruman fiber is a natural lignocellulosic fiber (NFL) extracted from the stalk of an Amazon plant (Ishinosiphon Koern) in the... -
Study of the Properties of Geopolymeric Mortars with the Addition of Natural Pineapple Fibers in the Fresh State
Portland cementCements is widely used in civil constructionConstruction due to various convenient properties, however, in its production processes a... -
Temperature-Dependent Material Property Databases for Marine Steels—Part 5: HY-80
Integrated Computational Materials Engineering (ICME)-based tools and techniques have been identified as the best path forward for distortion...
-
Temperature difference-enhanced salinity gradient energy conversion enabled by thermostable hydrogel membrane with anti-swelling property
Coupling low-grade heat (LGH) with salinity gradient is an effective approach to increase the efficiency of the nanofluidic-membrane-based power...
-
Characterization of Mortar in Fresh State with the Addition of Açai Fiber
The natural fiberFiber from açaí (Euterpe oleracea Mart.) is an example of agro-industrialWaste wasteIndustrial wastes generated in large quantities... -
Saturated and unsaturated aliphatic side chain-appended naphthalenediimide derivatives: synthesis and structure property relationship
Previous studies have shown influence of aliphatic side chain length and type on the transport properties of naphthalenediimide (NDI) materials by...
-
Tribological Property and Corrosion of Imidazolium-Based Ionic Liquid-Lubricated Steel Sliding Against Anodic Oxide Film on Al-Li Alloy in the Presence of Bubbles Produced by Synergistic Action of Electric Field and Friction
The tribological property and corrosion of a steel ball sliding against anodic oxide film (AOF) on Al-Li alloy lubricated by an ionic liquid...
-
Enhanced mechanical property and tunable dielectric property of SiCf/SiC-SiBCN composites by CVI combined with PIP
The SiBCN matrix via chemical vapor infiltration (CVI) or/and polymer infiltration pyrolysis (PIP) technologies was orderly introduced to SiC f /SiC...
-
One-step preparation of a superhydrophilic membrane with excellent anti-oil fouling property for simultaneous separation of emulsified oils and dyes in complex wastewater
As reported herein, an environmentally friendly superhydrophilic membrane with underwater superoleophobicity was prepared for the efficient...
-
An in-house grade natural rubber from fresh field coagula and its vulcanisate properties
This study investigates an in-house grade natural rubber (NR) produced from raw fresh field coagula (FFC) using a new processing technology developed...
-
Fabrication of Intracranial Vascular Nitinol Alloy Stents with Improved Mechanical Property and Endothelialization Function
Intracranial vascular stenting has been widely used for ischemic stroke. However, there are complication risks with stent implantation, such as poor...
-
Preparation and Thermal Insulation Property of BCN-TiN Composite Aerogels by In-Situ Carbothermal Reduction/Nitridation Method
Non-oxide ceramic aerogel draws increasing attention in area of thermal insulation because of its low density, high temperature resistance and good...
-
Microstructure, Mechanical Property and Corrosion Behavior of Cold-Sprayed Zn Coatings on Mg Alloy Substrate
Zn coatings on Mg alloy substrate were prepared by in-situ micro-forging-assisted cold spraying with different stainless steel shot additions. Phase,...
-
Field testing and ecotoxicity of acrylate-based sol–gel coatings in fresh and seawater
We demonstrate a laboratory and field-testing of six siloxane-based coatings to be potentially used as a topcoat paint on structured steel. The...
-
Effect of layer thickness on the flexural property and microstructure of 3D-printed rhomboid polymer-reinforced cemented tailing composites
For mines with poor ore bodies and surrounding rocks, the general mining method does not allow the ore to be extracted from underground safely and...
-
Multi-material additive manufacturing of MWCNT-based conductive photocurable resin and its antimicrobial property
In this study, we explored the technical feasibility to fabricate bi-material structures having electrically conductive properties at the surface...
-
Antibacterial property and bioadaptability of Ti6Al4V alloy with a silvered gradient nanostructured surface layer
AbstractIn this paper, a silvered gradient nanostructured (GNS) layer was successfully fabricated on Ti6Al4V surface by means of surface ultrasonic...