Search

Search Results

1. Effect of Double-Aging Heat Treatment on Microstructure and Tribological Behaviour of Cold Sprayed IN718 Coating

   In this work, the effect of double-aging (DA) heat treatment on the microstructure and the tribological behaviour of cold-sprayed Inconel 718 (IN718)...

   Alwin Balasundaram, Aviral Bisht, ... M. Kamaraj in Metals and Materials International

   Article 16 August 2023
   

2. Effect of Solution and Double-Stage Aging Treatment on the Microstructure and Mechanical Properties of CMT-WAAM Inconel625 Structural Components

   This study was conducted on the quality control of Inconel625 alloy thin-walled structural components by CMT-WAAM (Cold Metal Transfer Based Wire and...

   Tianqi Wang, **bao Tang, ... Hongsheng Han in Metals and Materials International

   Article 11 May 2024
   

3. Phase Transition and Twinning Induced High Strength and Large Ductility of a Near β-Ti Alloy Processed by Double Aging

   The mechanical properties and microstructures of a near β-Ti alloy (Ti-3.9Al-5.47Mo-4.74V-1.0Cr-1.71Fe, wt%) subjected to solution treatment and then...

   Chaoqiang Liu, Yanghuanzi Li, ... Min Song in Journal of Materials Engineering and Performance

   Article 19 May 2021
   

4. Influence of Double Aging Heat Treatment on Phase Transformation and Dimensional Accuracy of Inconel 718 Alloy made Through Laser-Based Additive Manufacturing

   Manufacturing defects, heterogeneous microstructure, and micro-segregation of secondary laves phases are the major issues to be resolved during the...

   V. Praveen Kumar, A. Vinoth Jebaraj in Transactions of the Indian Institute of Metals

   Article 23 August 2021
   

5. Design of a double aging treatment for the improvement of mechanical and microstructural properties of pulse micro-plasma arc welded alloy 718

   The effect of post-weld solution along with different double aging treatments on precipitation of various strengthening phases in Alloy 718 weld is...

   A. K. Sahu, S. Bag in Journal of Materials Science

   Article 10 May 2021
   

6. Comparisons of Age Hardening and Precipitation Behavior in 7075 Alloy Under Single and Double-Stage Aging Treatments

   Abstract

   Various sets of heat treatments are applied on 7075 alloy in this study in order to reduce the treatment time and yet still achieve the...

   Yun Fan, Xuan Tang, ... Bin Chen in Metals and Materials International

   Article 25 September 2020
   

7. Stability Assessment for Double Base Rocket Propellant During Long Natural/Artificial Aging Using Various Methods and Kinetic Modeling

   During storage of double base rocket propellant (DBRP) several chemical and physical processes occurred at normal storage conditions leading to a...

   Salim Chelouche, Djalal Trache, ... Abderrahmane Mezroua in Materials Research and Applications

   Chapter 2021
   

8. Study on the Strengthening Mechanism of Two-Stage Double-Peaks Aging in 7075 Aluminum Alloy

   The mechanical properties and microstructure of 7075 aluminum alloy during the two-stage aging process have been studied by means of Rockwell...

   S. W. Cai, Y. He, R. G. Song in Transactions of the Indian Institute of Metals

   Article 14 November 2019
   

9. Develo** a high-performance Al–Mg–Si–Sn–Sc alloy for essential room-temperature storage after quenching: aging regime design and micromechanisms

   Sn microalloying can depress the adverse effect of natural aging after quenching (i.e., room-temperature storage) of Al–Mg–Si alloys. However, the...

   Shuai Pan, **n-Jian Chen, ... Shuang-Bao Wang in Rare Metals

   Article 19 September 2023
   

10. Effect of Different Aging Treatments on the Microstructure and Corrosion Resistance of ADC12 Alloy

    The effects of T6 treatment and double aging treatment on the microstructure and corrosion resistance of ADC12 alloy were investigated using optical...

    Wei-Ming Xu, Peng-**ang Zhang, ... Hong Yan in Journal of Materials Engineering and Performance

    Article 17 July 2023
    

11. Preparation and Anti-ultraviolet Aging Performance of Organic Layered Double Hydroxides/Bitumen Composites

    Layered double hydroxides (LDHs) with the physical property of high ultraviolet (UV) reflectance were used to enhance the anti-UV aging performance...

    Song Xu, Jianying Yu, ... Changbin Hu in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 01 August 2019

12. Interface Characteristics and Mechanical Properties of Post-treated Directed Energy Deposition Laminated Composites

    Laminated composites of IN718-95% IN718 + 5% (Cr ₂ O ₃  + 25% TiO ₂ ) were fabricated by directed energy deposition, which were subjected to different...

    **g Liu, Pengfei Li, ... **zhong Lu in Journal of Materials Engineering and Performance

    Article 21 November 2022
    

13. High temperature oxidation behavior of laser powder bed fusion printed WC/Inconel 718 composites

    Generally, improving the high temperature oxidation resistance of nickel-based materials is crucial to enhance their service performance in...

    Rui Wang, Dongdong Gu, ... Meng Guo in Journal of Materials Science

    Article 25 July 2022
    

14. Effect of low-angle grain boundary and twin on precipitation mechanism in pre-rolled AZ91 magnesium alloy

    Low-angle grain boundary and twin significantly affect precipitation behavior. Twins were introduced into AZ91 magnesium alloys by pre-rolling. And...

    **ao Liu, Quan-hui Wan, ... Peng-cheng Guo in Journal of Materials Science

    Article 03 February 2024
    

15. Investigation of Statistical Relationships between Heat Treatment Modes, Grain Sizes, and Mechanical Properties of EP718-ID Alloy Rings

    Abstract

    Statistical dependences of grain size and mechanical properties on the conditions of hardening of rings of industrial production from the...

    Yu. B. Egorova, L. V. Davydenko, I. S. Kononova in Steel in Translation

    Article 01 July 2023
    

16. Microstructure evolution and growth kinetics of intermetallic compound in SAC305/Ag and SAC305/Cu solder joints during solid-state aging

    Microstructure evolution and growth kinetics of intermetallic compound (IMC) in Sn-3Ag-0.5Cu (SAC305) /Ag and SAC305/Cu solder joints were...

    Yuanming Chen, Junjie Huang, ... Yan Hong in Journal of Materials Science: Materials in Electronics

    Article 05 February 2024
    

17. Effect of Isothermal Ageing on Microstructure and Corrosion Behavior of Nickel and Molybdenum-Free High Nitrogen Austenitic Stainless Steel

    This study investigates the influence of isothermal ageing (550–850 °C) and time (30, 60, 180, 360, 720, and 1440 minutes) on microstructure and...

    Surjan Sheik, Raffi Mohammed in Journal of Materials Engineering and Performance

    Article 02 July 2024
    

18. Uniform pore structure silica aerogel powders prepared by pore repair method

    Nowadays, the rapid preparation of silica aerogel powders by ambient pressure drying (APD) method has been widely studied. However, the internal pore...

    Chao Li, Yumei He, ... Minghua Wu in Journal of Sol-Gel Science and Technology

    Article 13 April 2023
    

19. Effects of Long-Term Aging on Properties and Laves Phase Evolution of A New Type of Fe-Based Superalloy

    The 0Cr21Ni27Ti2AlNb alloy is a new type of Fe-based superalloy designed with Laves phase as the second strengthening phase. By the scanning electron...

    Wang Li-min, Hu Ri in Journal of Materials Engineering and Performance

    Article 10 October 2022
    

20. Analysis of Lattice Change in Aged Zr-2.5%Nb CANDU Pressure Tube Material Using a Neutron Diffraction

    Zr-2.5%Nb pressure tube material is known to cause in-reactor deformation in the CANDU reactor operating environment. This is because the pressure...

    Jong Yeop Jung, Hyung Sub Kim, SungSoo Kim in Metals and Materials International

    Article 04 February 2023