Search

Search Results

1. Study of the Microstructure, Mechanical Properties, Residual Stresses, and Distortion in Type 316LN Stainless Steel Medium Thickness Plate Weld Joints

   A nuclear reactor that utilizes fast neutrons to produce more fissile nuclear fuels than they consume while generating power is called Fast Breeder...

   M. Ragavendran, M. Vasudevan, Naveed Hussain in Journal of Materials Engineering and Performance

   Article 21 January 2022
   

2. Influence of current pulsation on solidification parameters during micro-plasma arc welding of thin sheet Alloy 718

   In the present work, the influence of current pulsation on microstructural morphology and mechanical properties of micro-plasma arc welded of 0.7-mm...

   A. K. Sahu, S. Bag in Welding in the World

   Article 23 September 2021
   

3. Inclusive Review on Welding of Duplex Stainless Steels

   Compared to conventional austenitic stainless steels, duplex stainless steels are distinguished by stable ferrite/austenite microstructures and are...

   Sasidhar Gurugubelli, V. V. S. Kesava Rao in Advances in Mechanical Engineering

   Conference paper 2021
   

4. A Study on the Residual Stresses in Tungsten Inert Gas and Laser Welded Nitinol Superelastic Alloy

   Fusion-based joining techniques such as TIG and Laser are used for the high-quality Nitinol welds. The joining of Nitinol is challenging due to the...

   Shashwat Aayush, Anoj Giri, ... M. M. Mahapatra in Journal of Materials Engineering and Performance

   Article 09 May 2024
   

5. Influence of alloying elements and cooling rate on the presence of delta ferrite in modified 9Cr–1Mo as-welded microstructure produced by gas–metal arc welding

   Although P91 steel welds should ideally exhibit a fully martensitic microstructure, delta ferrite is sometimes observed, which has detrimental...

   S. S. Mahlalela, P. G. H. Pistorius in Welding in the World

   Article 16 January 2023
   

6. Microstructural Investigation and Integrated Optimization of Weld Bead Characteristics in Electron Beam Welding of Inconel 825

   This work presents welding investigation of a popular Ni–Fe–Cr-based alloy (i.e. Inconel 825) using electron beam welding process, considering beam...

   Bishub Choudhury, M. Chandrasekaran in Transactions of the Indian Institute of Metals

   Article 13 July 2021
   

7. Development and Deployment of Welding Technologies for the Indian Sodium-Cooled Fast Reactor and Advanced Ultra-supercritical Thermal Power Programmes

   Robust manufacturing technology for sodium-cooled fast reactor (SFR) components required development of various innovative welding technologies...

   Arun Kumar Bhaduri in Transactions of the Indian Institute of Metals

   Article 07 May 2021
   

8. Effect of Welding Consumables on the Ballistic Performance of Shielded Metal Arc Welded Dissimilar Armor Steel Joints

   The welding of dissimilar armor-grade steels is always challenging due to their carbon equivalent (CE) differences. In this investigation, dissimilar...

   S. Naveen Kumar, V. Balasubramanian, ... V. Balaguru in Journal of Materials Engineering and Performance

   Article 13 September 2021
   

9. Through Thickness Variations on Dissimilar Weldments of Austenitic Steel AISI 321 and Ferritic Steel AISI 409 Welded by Electron Beam Welding

   Electron beam welding was used to fabricate dissimilar butt weld joints of AISI 321 and AISI 409 stainless steel 18-mm-thick plates. On both sides,...

   Ajay Sharma, Vineet Prabhakar, Sandeep Singh Sandhu in Metallography, Microstructure, and Analysis

   Article 01 October 2021
   

10. Investigating Failure in Laser-Welded Joints of Microalloyed Steel: A Systematic Review

    Laser welding is the widely used method in steel industries to join hot-rolled coils and repair mold steel, railway axles, and automotive pressure...

    Dheeraj Kumar Saini, Pankaj Kaushik in Transactions of the Indian Institute of Metals

    Article 09 April 2024
    

11. Effect of activated flux tungsten inert gas (A-TIG) welding on the mechanical properties and the metallurgical and corrosion assessment of Inconel 625

    This article makes an attempt to investigate the outcome of activated flux and filler wire in addition to A-TIG welding and TIG welding of Inconel...

    J. Sivakumar, M. Vasudevan, Nanda Naik Korra in Welding in the World

    Article 08 February 2021
    

12. Effect of Preheating Temperature on Retention of δ-Ferrite in ASTM A355 Grade P92

    Grade P92 steel has a possibility of forming delta ( δ ) ferrite phase in the weld fusion zone, which has several detrimental effects on mechanical...

    Nitin Saini, Rahul S. Mulik, ... Leijun Li in Metallurgical and Materials Transactions B

    Article 05 December 2022
    

13. Classification of Joining Processes

    This chapter presents the need of classification of welding processes apart from various technical aspects as basis for classification of welding...

    Dheerendra Kumar Dwivedi in Fundamentals of Metal Joining

    Chapter 2022
    

14. Evaluation of methods used for simulation of heat-affected zones in duplex stainless steels

    The weldability of duplex stainless steels partly depends on the ferritization of the high-temperature heat-affected zone (HT-HAZ). This area is...

    E. M. Westin, L. G. Westerberg in Welding in the World

    Article Open access 23 February 2024
    

15. Effect of Welding Parameters on the Liquation Cracking Behavior of High-Chromium Ni-Based Superalloy

    Gas turbine blades working under extremely harsh operating conditions are made of superalloys. These superalloys are exposed to various damage...

    Amirhossein Mashhuriazar, Hamid Omidvar, ... Zainuddin Sajuri in Journal of Materials Engineering and Performance

    Article 16 November 2020
    

16. Effect of process parameters on porosities in electron beam welded AA-6061 to AA-2024 dissimilar joints

    The electron beam welding process was used to produce dissimilar butt-joints of AA-6061 to AA-2024 sheets using various welding conditions such as...

    Jyotirmaya Kar in Welding in the World

    Article 13 June 2023
    

17. Microstructures and Creep Properties of Type 316LN Stainless Steel Weld Joints

    In the present investigation, creep deformation and rupture behavior of type 316LN stainless steel weld joints fabricated from hotwire tungsten inert...

    A. R. Pavan, T. Sakthivel, ... B. R. Vaishnavi Krupa in Metallurgical and Materials Transactions A

    Article 29 September 2023
    

18. Quantifying Susceptibility to Solidification Cracking in Oscillated CM247LC Superalloy Welds via Varestraint Testing

    Abstract

    CM247LC, a Ni-based superalloy, is employed in the high-temperature components of gas turbines, such as the blades. However, the welds of...

    Kyeong-Min Kim, Uijong Lee, ... Eun-Joon Chun in Metals and Materials International

    Article 23 June 2022
    

19. Influence of Nickel on the Microstructure, Mechanical Properties, and Corrosion Resistance of Laser-Welded Super-Duplex Stainless Steel

    Super-duplex stainless steel (SDSS) exhibits an austenite-ferrite dual-phase structure, which promotes many benefits upon single-phase grades, such...

    E. J. da Cruz Junior, J. Gallego, ... V. A. Ventrella in Journal of Materials Engineering and Performance

    Article 19 March 2021
    

20. Prevention of Sensitization and Fracture Analysis of Keyhole Plasma Arc Welded AISI 304 HCu Tube Joints

    Reheaters and superheaters of the Advanced Ultra Supercritical (AUSC) Boilers prefer AISI304 HCu. The steels are prone to sensitization on welding...

    P. G. Sam Infant Jones, S. Rajakumar, ... V. Balasubramanian in Journal of Failure Analysis and Prevention

    Article 26 June 2023