SpringerLink
Log in

Inclusive Review on Welding of Duplex Stainless Steels

  • Conference paper
  • First Online:
Advances in Mechanical Engineering

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

  • 1152 Accesses

Abstract

Compared to conventional austenitic stainless steels, duplex stainless steels are distinguished by stable ferrite/austenite microstructures and are fine recognized for their greater corrosion resistance and greater strength. Joining of the duplex stainless steels is a difficult task, as the weld joints have low impact toughness at heat-affected zone (HAZ) with fusion welding and susceptibility to solidification cracking. One has to carry out pre-heating and control the cooling rates of welded joints in order to get the desired quality. This paper analyzed the works reported by earlier researchers on joining of duplex steels using various arc and non-arc welding processes. Most of the researchers studied microstructure, mechanical properties like tensile strength, hardness and impact strength. Much effort, however, is not being made on fatigue and creep monitoring. Very little work on corrosion is recorded at elevated temperatures of duplex steel welded joints. The study of welded joints by finite elements focuses on limited research. This paper provides an exhaustive analysis on the impact of various welding procedures on stainless duplex steels.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
EUR 29.95
Price includes VAT (Germany)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
EUR 160.49
Price includes VAT (Germany)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
EUR 213.99
Price includes VAT (Germany)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free ship** worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  1. Kahar SD (2017) Duplex stainless steels—an overview. Int J Eng Res Appl 7(4):27–36

    Google Scholar 

  2. Chail G, Kangas P (2016) Super and hyper duplex stainless steels: structures, properties and applications. In: 21st European Conference on Fracture, Catania, Italy, vol 2, 20–24 June 2016, pp 1755–1762

    Google Scholar 

  3. Haugan EB, Næss M, Rodriguez CT, Johnsen R, Iannuzzi M (2017) Effect of tungsten on the pitting and crevice corrosion resistance of type 25 Cr super duplex stainless steels. Corrosion 73(1):53–67

    Google Scholar 

  4. Verma J, Taiwade RV (2017) Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless-steel weldments. J Manuf Process 25:134–152

    Google Scholar 

  5. Qi K, Li R, Wang G, Li G, Liu B, Wu M (2018) Microstructure and corrosion properties of laser-welded SAF 2507 super duplex stainless steel joints. J Mater Eng Perform

    Google Scholar 

  6. Zhu Z-H, Zhang W-D, **ao-hui Tu, Wang X-J, Li W (2018) Effect of sigma phase precipitation on microstructure and properties of cast ZG0Cr26Ni5Mo3Cu3 duplex stainless steel under different heat treatments. China Foundry Res Dev 15(3):182–188

    Article  Google Scholar 

  7. Zhang Z, Zhang H, Hu J, Qi X, Bian Y, Shen A, Xu P, Zhao Y (2018) Microstructure evolution and mechanical properties of briefly heat-treated SAF2507 super duplex stainless steel welds. Construct Build Mater 168:338–345

    Google Scholar 

  8. Hu Y, Shi Y, Shen X, Wang Z (2018) Microstructure evolution and selective corrosion resistance in underwater multi-pass 2101 duplex stainless steel welding joints. Metallurg Mater Trans A

    Google Scholar 

  9. Sivagurumanikandan N, Saravanan S, Shanthos Kumar G, Rajua S, Raghukandan K (2018) Prediction and optimization of process parameters to enhance the tensile strength of Nd YAG laser welded super duplex stainless steel. Optik 157:833–840

    Google Scholar 

  10. Suryana S, Pramono A, Muda I, Setiawan A (2018) The influence of heat input to mechanical properties and microstructures of API 5L-X65 steel using submerged arc welding process. In: MATEC Web of Conferences, IIW 2018, p 269

    Google Scholar 

  11. Saravanana S, Sivagurumanikandan N, Raghukandan K (2019) Effect of heat input on microstructure and mechanical properties of Nd YAG laser welded super duplex stainless steel-numerical and experimental approach. Optik 185:447–455

    Article  Google Scholar 

  12. Zhang WW, Cong S, Luo SB, Fang JH (2018) Effects of energy density and shielding medium on performance of laser beam welding (LBW) joints on SAF2205 duplex stainless steel. JOM 70(8):1554–1559

    Article  Google Scholar 

  13. Li T, Zhang Y, Gao L, Zhang Y (2018) Optimization of FCAW parameters for ferrite content in 2205 DSS welds based on the Taguchi design method. Hindawi, Adv Mater Sci Eng. Article ID 7950607, 7 pages, pp 1–7

    Google Scholar 

  14. Bansal Rajkumar G, Murugan N (2014) Development of regression models and optimization of FCAW process parameter of 2205 duplex stainless steel. Indian J Eng Mater Sci 21:149–154

    Google Scholar 

  15. Yurtisik K, Tirkes S, Dykhno I, Hakan Gur C, Gurbuz R (2013) Characterization of duplex stainless-steel weld metals obtained by hybrid plasma-gas metal arc welding. Soldag Insp So Paulo 18(3):207–216

    Google Scholar 

  16. Tolunguc B (2012) Microstructural and mechanical characterization of duplex stainless-steel grade 2205 joined by hybrid plasma and gas metal arc welding. Master’s Thesis, Middle East Technical University

    Google Scholar 

  17. Srinivas K, Vundavilli PR, Manzoor Hussain M (2018) Optimization of weld bead parameters of plasma arc welding using GA and IWO. In: Hiremathetal SS (ed) Select proceedings of ICAMT 2018. LNCS. Springer, Berlin, pp 17–24

    Google Scholar 

  18. Daha MA, Nassef GA, Abdallah IA, Abouseeda HM (2012) Three-dimensional thermal finite element modeling for keyhole plasma arc welding of 2205 duplex stainless steel plates. Int J Eng Technol 2(4):720–728

    Google Scholar 

  19. Fatima S, Khan M, Jaffery SHI, Ali L, Mujahid M, Butt SI (2015) Optimization of process parameters for plasma arc welding of austenitic stainless steel (304 L) with low carbon steel (A-36). Proc Imeche Part L J Mater Des Appl 1–14

    Google Scholar 

  20. Dandekar TR, Gupta A, Kumar A, Khatirkar RK, Vadavadagi B (2018) Shielded metal arc welding of UNS S32750 steel: microstructure, mechanical properties and corrosion behavior. Res Mater Exp 5(10):106506

    Google Scholar 

  21. Gupta A, Kumar A, Baskaran v, Arya SB, Khatirkar RK (2018) Effect of heat input on microstructure and corrosion behavior of duplex stainless-steel shielded metal arc welds. Trans Indian Inst Metals 71(7):1595–1606.

    Google Scholar 

  22. Suryana S, Pramono A, Muda I, Setiawan A (2018) The influence of heat input to mechanical properties and microstructures of API 5L-X65 steel using submerged arc welding process. In: MATEC Web of Conferences, 269, 01009(2019), IIW 2018

    Google Scholar 

  23. Swierczynska, J. Labanowski, D. Fydrych, The effect of welding conditions on mechanical properties of super duplex stainless steel welded joints, Adv Mater Sci 14(1):14–23

    Google Scholar 

  24. Han Qi, Jiang S, Wang X (2018) Simulation study of mig welding arc with additional magnetic field based on FLUENT. Trans Intell Weld Manuf 2(1):159–168

    Google Scholar 

  25. Sicupira DC, Frankel GS, Lins VFC (2016) Pitting corrosion of welds in UNS S32304 lean duplex stainless steel. Mater Corros 67(5):440–448

    Google Scholar 

  26. Devendranath Ramkumar K, Mishra D, Thiruvengata G, Sudharsan SP, Mohan TH, Saxena V, Pandey R, Arivazhagan N (2015) Investigations on the microstructure and mechanical properties of multi-pass PCGTA welding of super-duplex stainless steel. Bull Mater Sci 38(4):837–846

    Google Scholar 

  27. Paulraj P, Garg R (2015) Effect of welding parameters on mechanical properties of GTAW of UNS S31803 and UNS S32750 weldments. Manuf Rev 2(29):1–9

    Google Scholar 

  28. Moon I-J, Jang B-S, Koh J-H (2013) Heat treatment effect on pitting corrosion of super duplex stainless steel UNS S32750 GTA welds. Adv Mater Res 746:467–472

    Article  Google Scholar 

  29. Patel U, Patel D, Santoki PN (2017) Parametric comparison and optimization of process parameters in TIG welding with and without use of flux for SS316. IJARIIE 3(2):111–115

    Google Scholar 

  30. Devedranath Ramkumar K, Oza S, Periwal S, Arivazhagan N, Sridhar R, Narayanan S (2015) Characterization of weld strength and toughness in the multi-pass welding of Inconel 625 and super duplex stainless steel UNS S32750. Ciencia and Tecnologia dos Materials 27:41–52

    Google Scholar 

  31. Sivagurumanikandan N, Raghukandan K, Saravanan S (2016) Pulsed wave Nd:Yag laser welding of UNS S32750 super duplex stainless steel. J Manuf Eng 11(2):75–78

    Google Scholar 

  32. Taban E, Kaluc E (2011) Welding behaviour of Duplex and Super duplex Stainless Steels Using Laser and Plasma Arc Welding processes. Weld World Peer-Rev Sect 55:48–57

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical, GMR Institute of Technology, Rajam, India

    Sasidhar Gurugubelli

  2. Department of Mechanical, Andhra University, Visakhapatnam, India

    V. V. S. Kesava Rao

Authors
  1. Sasidhar Gurugubelli
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. V. V. S. Kesava Rao
    View author publications

    You can also search for this author in PubMed Google Scholar

Editor information

Editors and Affiliations

  1. Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Roorkee, India

    Gaurav Manik

  2. Department of Chemistry, Army Cadet College, Indian Military Academy, Dehradun, Uttarakhand, India

    Susheel Kalia

  3. CSIR—National Institute for Interdisciplinary Science and Technology (NIIST), Thiruvananthapuram, Kerala, India

    Sushanta Kumar Sahoo

  4. School of Engineering and Technology, Shobhit University, Saharanpur, India

    Tarun K. Sharma

  5. Department of Instrumentation and Control Engineering, Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India

    Om Prakash Verma

Rights and permissions

Reprints and permissions

Copyright information

© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Gurugubelli, S., Rao, V.V.S.K. (2021). Inclusive Review on Welding of Duplex Stainless Steels. In: Manik, G., Kalia, S., Sahoo, S.K., Sharma, T.K., Verma, O.P. (eds) Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-0942-8_38

Download citation

  • DOI: https://doi.org/10.1007/978-981-16-0942-8_38

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-16-0941-1

  • Online ISBN: 978-981-16-0942-8

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation