Search
Search Results
-
Distribution Behaviors of As, Sb, Bi, Sn, Se, Te, Au and Ag Between Cu and Liquid Metal Phases in the Cu-Pb Binary System at 500–1080°C
The present study focused on the Cu-Pb system and investigating the distribution behaviors of various minor elements through the...
-
Co-Smelting Process of Pb Concentrate and Zn Leaching Residues with Oxygen-Rich Side Blowing Furnaces: Industrial Application and Material Balance
The application of oxygen-rich side blowing furnaces in the direct lead-smelting process has excellent potential and ideal capability for...
-
Formation of Ag Dendrites During the Electrolytic Migration Between Ag-4Pd Wire Couple in Water Under Bias
The growth of Ag dendrites induced by the Ag ion migration between Ag-4Pd alloy wire couples immersed in pure water under bias was observed, and its...
-
C@Ag core-shell structure as lubricating additives towards high efficient lubrication
Efficient cooperative lubrication can be achieved via the introduction of core-shell structure lubricant additives with hard core and soft shell, for...
-
Microstructure and Performance Study of Al/Cu Laser Welding with Ag Interlayer
In the past research, there was a gap in the field of Al/Cu dissimilar metal welding with Ag intermediate layer, and attention to the joint...
-
Structural characteristics and corrosion properties of Cu/Sn–Pb composite produced by accumulative roll bonding process
Cu/Sn–Pb multilayer composite was fabricated by accumulative roll bonding (ARB) technique and its structural, mechanical, and corrosion properties...
-
Device modeling and performance analysis of an all-inorganic lead-free Ag2BiI5 rudorffite-based solar cell with AgSCN as HTL via GPVDM simulation software
The unprecedented photo-electronic conversion efficiency (PCE) of organic–inorganic lead perovskite solar cells (PSCs), over 25% within a span of...
-
Sulfide Minerals and Fluid Chemistry of Zn–Pb Deposits in Central Sanandaj–Sirjan Zone, Iran
A wide variety of Zn–Pb deposits have been reported along the Malayer–Esfahan metallogenic belt in Iran. This metallogenic belt is localized in the...
-
Investigation of the Optimal Recovery of Sn, Pb, Cu, and Ni from E-waste Generated Type of Slags in the Black Copper Processing Route
Electronic waste (e-waste) is the fastest-growing type of solid waste stream with increasing environmental concern. Fortunately, the presence of...
-
Resolving Mixed Intermediate Phases in Methylammonium-Free Sn–Pb Alloyed Perovskites for High-Performance Solar Cells
The complete elimination of methylammonium (MA) cations in Sn–Pb composites can extend their light and thermal stabilities. Unfortunately, MA-free...
-
Effect of NaCN:ZnSO4 Mixture Molar Ratio and Particle-Size Distribution on Pb-Zn and Fe Selective Separation by Froth Flotation
This work studies the depression of sphalerite and pyrite with a NaCN:ZnSO 4 mixture in the selective separation of Pb-Zn by flotation when the blend...
-
Strongly Coupled Ag/Sn–SnO2 Nanosheets Toward CO2 Electroreduction to Pure HCOOH Solutions at Ampere-Level Current
Electrocatalytic reduction of CO 2 converts intermittent renewable electricity into value-added liquid products with an enticing prospect, but its...
-
Application of a Deep Eutectic Solvent for Dispersive Liquid–Liquid Microextraction of Trace Amount of Pb (II) in Water Samples and Determination by Microvolume UV–Vis Spectrophotometry
There is an increasing interest in synthesizing/develo** novel deep eutectic solvents (DESs) as green and/or sustainable solvents for various...
-
Ag recovery from waste printed circuit boards of cell phone for synthesis of Ag nanoparticles and their antibacterial activity
The increase in technology has increased the consumption and waste of electrical and electronic equipment, especially cell phones ( smartphones ). The...
-
Rapid and selective electrochemical detection of pb2+ ions using aptamer-conjugated alloy nanoparticles
Heavy metals are an important class of technogenic toxicants that pollute rivers and underground water. Here we proposed the use of electrochemical...
-
Physical Properties of Ba2XIO6 (X = Ag, Na) Double Perovskite Oxides for Energy Harvesting Devices
Herein, we have presented systematic DFT calculations for physical properties of barium-based periodate double perovskite oxides Ba 2 AgIO 6 and Ba 2 NaIO 6 ...
-
Additively Manufactured Electrochemical and Biosensors
The present chapter describes biosensor device properties and electro analytical methods involved in the development of environmentally sustainable...
-
Replacing Dichromate with Polysaccharide Depressant in Cu-Pb Separation: Lab Bench Tests and Plant Trials in Zi** Mining
ZJ 201 (modified starch) is a non-toxic, odorless, and biodegradable polymeric depressant, which selectively depressed galena in batch flotation...
-
Electrochemical Behaviors of Powder-Processed Pb-Ag Anodes
Pb-based anodes with different Ag contents (0 wt.%, 0.2 wt.%, 0.4 wt.%, 0.6 wt.%, 0.8 wt.%) were prepared by the powder-processed (PP) method....
-
Investigation of Pyrolysis Followed by Leaching for Metal Recovery from Integrated Circuits
The increase in electronics production has resulted in the massive generation of electronic waste. Integrated circuits are crucial to printed circuit...
