Search
Search Results
-
Quantifying the Role of Coarse Intermetallic Particles on Deformation Behavior
Deformation twinningDeformation twinning is a mechanism of critical interest in magnesium alloysMagnesium alloys (Mg alloys) and other HCP metals,... -
Failure Analysis in Advanced Driver Assistance Systems
Failure analysis (FA) could provide timely feedback to process optimization and solution paths for system failures; thus, it is critical for the... -
Strain inhomogeneity and grain refinement in AA6063 aluminum alloy subjected to repetitive corrugation and straightening: comparison of experimental and finite element analysis
The strain distributions in aluminum alloy AA6063 resulting from Repetitive Corrugation and Straightening (RCS) at room temperature were examined...
-
Investigations on the Aging of Traction Conductors Using Morphological and Textural Analysis
Investigations on the morphological modifications due to aging in service on the rail traction catenary conductors are conducted. Modifications on... -
Derivation of Response Spectra and Hysteretic Energy: A Case Study on 2023 Turkey-Syria Earthquake in Consideration of Structural Ductility
Structural response under strong ground motion has always been of concern in engineering seismology due to low predictability of seismic events and... -
Effect of Sc and Zr Microalloying on Grain Structure After Hot Deformation and Brazing in Al–Mn 3xxx Alloys
Al–Mn 3xxx alloysAl-Mn 3xxx alloys are widely used in the fabrication of multi-port extruded (MPE) tubes for aluminumAluminum heat exchangers. The... -
Hot Deformation Behavior and Post-brazing Grain Structure of Dilute Al–(Sc–Zr) Alloys for Brazed Heat Exchangers
An abnormally coarsened grain structure after brazingBrazing can negatively affect the in-service performance of a brazed heat exchanger. One of the... -
Mechanical Behavior and Damage of Advanced Iron-Based Metal Matrix Composite Under Shear
This paper aims to analyse the microstructure and the mechanical behavior of a novel steel-based composite reinforced by TiB2 ceramic particles,... -
Microstructure evolution and strain hardening behavior of thermomechanically processed low-C high-manganese steels: an effect of deformation temperature
Effects of reduced (– 40 °C), ambient (20 °C), and elevated (200 °C) deformation temperatures on the microstructure evolution and strain hardening...
-
In Situ Characterization of Deformation Twinning in Magnesium During Cyclic Loading via Electron Backscatter Diffraction
An approach for identifying deformation twinning and twin variants from electron backscatter diffraction (EBSD) data collected at multiple load steps...
-
Electron Backscatter Diffraction Technique: Fundamentals to Applications
Scanning electron microscopy (SEM) has always been an essential tool for the qualitative analysis of microstructure of any material. With the advent... -
Integrating atomistics and experiments in gaining deeper insights into fatigue crack propagation in silver
This research utilizes both single crystal and polycrystalline models to probe the fatigue crack propagation mechanism in pure silver via molecular...
-
An Exploratory Analysis of the Substructural Evolution of AA3104 Rolled Sheet Under Diverse Thermal Treatments
The mechanical properties of rolled sheets are not solely determined by their grain structure but also by their substructure. However, the features...
-
Mechanical and Microstructural Analysis of Exfoliated Graphite Nanoplatelets-Reinforced Aluminum Matrix Composites Synthesized via Friction Stir Processing
In this work, an investigation was conducted into the microstructure and mechanical characteristics of friction stir processed aluminum matrix...
-
Tailoring the strength-ductility balance of a commercial austenitic stainless steel with combined TWIP and TRIP effects
The sequential twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) effects were induced in a commercial AISI 304L...
-
Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations
This article details the ESAFORM Benchmark 2021. The deep drawing cup of a 1 mm thick, AA 6016-T4 sheet with a strong cube texture was simulated by...
-
Deformation Mechanism Transition in Additively Manufactured Compositionally Graded Fe-Base Alloys
Microstructure-dependent deformation and fracture behavior was investigated for an additively manufactured compositionally graded alloy (CGA) printed...
-
Microtexture Region Segmentation Using Matching Component Analysis Applied to Eddy Current Testing Data
Microtexture regions (MTR) are collections of grains with similar crystallographic orientation; their presence in aerospace components can...
-
Effect of Laser Peening on Surface Morphology and Deformation Level of Additively Manufactured 316L Stainless Steel
Laser peening (LSP) is a surface enhancement technology that utilizes a short-pulsed laser to improve the fatigue life of components. With the advent... -
Multi-layer solid-state ultrasonic additive manufacturing of aluminum/copper: local properties and texture
Ultrasonic additive manufacturing (UAM) is an advanced joining technique that utilizes ultrasonic vibrations to bond layers of metal foil together....