Search

Search Results

1. Properties of Titanium Carbonitride TiCN Coatings Obtained by Vacuum Arc Deposition

   Abstract

   A comprehensive study is performed on the effect of vacuum arc conditions on the formation of TiCN coatings, specifically focusing on...

   S. A. Klymenko, S. V. Lytovchenko, ... Y. O. Melnychuk in Journal of Superhard Materials

   Article 01 June 2024
   

2. Application of Vacuum-Arc-Coatings Based on Titanium Aluminum Carbonitrides to Improve the Service Life of Metal-Cutting Tools

   Abstract

   The results of the influence of the ratio of reaction gases when carbonitride coatings of the Ti–Al–C–N system are applied to the hard-alloy...

   K. N. Ramazanov, E. L. Vardanyan, ... A. A. Ryzhkin in High Energy Chemistry

   Article 08 September 2023
   

3. Surface evaluation of carbonitride coating materials at high temperature: an investigation of oxygen adsorption on crystal surfaces by molecular dynamics simulation

   In the presented work, changes in the surface morphology and crystal structure of the coatings obtained by adding Zr, Si, Nb, ZrSi and ZrNb elements...

   M. N. Mirzayev, G. T. Imanova, ... A. Vladescu (Dragomir) in Journal of Porous Materials

   Article 30 April 2024
   

4. Wear Rate of PcBN Cutting Tools Equipped with Nanolayered Protective Coatings

   Abstract

   We consider the effect of protective PVD coatings of various chemical compositions on the wear rate of cutting tools equipped with...

   A. S. Manokhin, S. A. Klimenko, ... Wang Hongshun in Journal of Superhard Materials

   Article 01 November 2020
   

5. TiN and TiCN Coated Stainless Steel 316 Ultrosonic Cavitation Probe for High Temperature Application

   Ultrasonic Cavitation Probe Assisted method in Stir Casting is used to produce metal matrix nano-composites (MMNCs) in bulk quantity with uniform...

   G. Kumaresan, E. Machlin Jawahar, P. Senthilkumar in Silicon

   Article 27 July 2018

6. Cermet Plasma Coatings Based on Silicon Carbide

   Abstract

   The structure, phase composition, and C, O, and N content in two cermet coatings sprayed from powders of the initial composition of...

   V. I. Kalita, A. A. Radyuk, ... D. D. Titov in Inorganic Materials: Applied Research

   Article 01 September 2019
   

7. Cermet Plasma TiC–Cr₃C₂–NiCr–Mo–C Coatings

   Abstract

   To determine the possibility of maintaining the maximum possible carbon content in TiC carbide, a powder additionally doped with chromium...

   V. I. Kalita, A. A. Radyuk, ... A. V. Alpatov in Inorganic Materials: Applied Research

   Article 01 March 2019
   

8. Promising Types of Coatings for PCBN Tools

   The paper reviews the present-day trends in the development of new types of wear-resistant coatings, including nanostructured ones, for PCBN tools....

   A. S. Manokhin, S. A. Klimenko, ... V. M. Beresnev in Journal of Superhard Materials

   Article 01 November 2018

9. Advanced Noncarbon Materials as Catalyst Supports and Non-noble Electrocatalysts for Fuel Cells and Metal–Air Batteries

   Abstract

   Electrochemical energy systems such as fuel cells and metal–air batteries can be used as clean power sources in the field of electric...

   Shiming Zhang, Menghui Chen, ... Jiujun Zhang in Electrochemical Energy Reviews

   Article 04 February 2021
   

10. Special features of the applications of cutting tools from polycrystalline cubic boron nitride with protective coatings

    The results of the investigations on the efficiency of cutting tools from polycrystalline superhard materials based on cubic boron nitride with a...

    S. A. Klimenko, S. An. Klimenko, ... V. M. Beresnev in Journal of Superhard Materials

    Article 01 July 2017

11. Mechanical and tribological properties of V–C–N coatings as a function of applied bias voltage

    The aim of this work is to determine the mechanical and tribological behavior of V–C–N coatings deposited on industrial steel substrates (AISI 8620)...

    J. C. Caicedo, R. Gonzalez, ... C. Amaya in Journal of Superhard Materials

    Article 01 September 2016

12. Multilayer nanostructured coatings for cutting tools

    Problems of the application of three-layer composite coatings for cutting tools with the nanostructured granular structure and nanoscale thickness of...

    A. S. Vereschaka, A. A. Vereschaka, ... A. S. Sivenkov in Inorganic Materials: Applied Research

    Article 01 September 2014

13. Microplasma: A New Generation of Technology for Functional Nanomaterial Synthesis

    Plasma technology has been widely applied in the ozone production, material modification, gas/water cleaning, etc. Various nanomaterials were...

    Liangliang Lin, Qi Wang in Plasma Chemistry and Plasma Processing

    Article Open access 15 August 2015
    

14. A theoretical study of possible point defects incorporated into α-alumina deposited by chemical vapor deposition

    The energetics and electronic structure of carbon, chlorine, hydrogen, and sulfur in α-Al ₂ O ₃ was investigated by first principles and thermodynamical...

    C. Århammar, F. Silvearv, ... R. Ahuja in Theoretical Chemistry Accounts

    Article 27 December 2013
    

15. Semi-quantitative chemical analysis of hard coatings by Raman micro-spectroscopy: the aluminium chromium nitride system as an example

    A new method for chemical analyses of nitride-based hard coatings is presented. Raman band shifts in the spectra of Al _x Cr _{1− x ...}

    R. Kaindl, B. Sartory, ... C. Mitterer in Analytical and Bioanalytical Chemistry

    Article 12 October 2007
    

16. Detection of mechanical effects of adhesive thin films on substrate using the modulated-temperature dilatometry (MT DIL)

    The work is aimed to develop the diagnostic method for testing the state of surface coated with the wear-resistant films. Thin wear-resistant ceramic...

    P. Myśliński, P. Kamasa, ... J. Staśkiewicz in Journal of Thermal Analysis and Calorimetry

    Article 01 June 2007

17. Transparente und farbige Kratzschutzschichten

    Christoph Metzner, Henry Morgner, ... Peter Frach in JOT Journal für Oberflächentechnik

    Article 01 January 2005

18. Application of Temperature Modulated Relative Dilatometry. Temperatures of adhesion degradation

    Application of temperature modulated dilatometry (TM DIL) to investigation on degradation of the adhesion between ceramic films and the substrate is...

    P. Myśliński, P. Kamasa, A. Wąsik in Journal of Thermal Analysis and Calorimetry

    Article 01 August 2001

19. Single-source precursors for the chemical vapor deposition of titanium and vanadium carbide and nitride

    A comparative study of a series of 28 single organometallic precursors to the binary ceramic phases TiC, TiN, VC, VN is reported. The design of the...

    L. Valade, R. Choukroun, ... F. Maury in The Chemistry of Transition Metal Carbides and Nitrides

    Chapter 1996
    

20. SHS-The New Method of Different Inorganic Materials Production

    The article has its aim to introduce the readers with some characteristic features which make Self-Propagating High-Temperature Synthesis (SHS) very...

    K. L. Padukov in Multifunctional Mesoporous Inorganic Solids

    Chapter 1993