Skip to main content

4 Result(s)

within W. S. Wang Remove this filter Nanotechnology Remove this filter

and

  1. No Access

    Article

    Direct indication of lateral nonuniformities of MOS capacitors from the negative equivalent interface trap density based on charge-temperature technique

    The charge-temperature technique was used to investigate the oxide properties of silicon MOS capacitors fabricated on a wafer with an oxide thickness of 660 Å. The stretchout of high frequencyC — V curve of the c...

    J. G. Hwu, W. S. Wang in Applied Physics A (1986)

  2. No Access

    Article

    The effect of tungsten particle size on the processing and properties of infiltrated W-Cu compacts

    Three tungsten powders with average particle sizes of 8.7, 23.2, and 65.2 µm were used to make W-15Cu compacts. The compacting pressure and sintering temperature were adjusted for each powder to attain the desire...

    W. S. Wang, K. S. Hwang in Metallurgical and Materials Transactions A (1998)

  3. No Access

    Article

    The Behavior of Cyclic Voltammetry Strip** (CVs) with Tin-Doped Indium Oxide in 0.3M Hydrochloric Acid

    The cyclic voltammetry strip** (CVs) behavior of the tin-doped indium oxide (ITO) on SiO2 in 0.3M HCl is reported. The CVs result showed an obvious reduction-current peak that occurred during the first catho...

    K. C. Li, C. A. Huang, G. C. Tu, W. S. Wang in MRS Online Proceedings Library (2003)

  4. No Access

    Article

    Novel flame retardant epoxy/clay nanocomposites prepared with a pre-ground phosphorus-containing organoclay

    A series of novel epoxy/clay nanocomposites (EPOCg-x) were prepared with a selected epoxy resin and x wt% of a mechanically ground phosphorus-containing organoclay (POCg). The results of x-ray diffraction (XRD), ...

    Y.W. Chen-Yang, W.S. Wang, J.C. Tang, Y.W. Wu, H.S. Chen in Journal of Materials Research (2008)